Showing 241–252 of 563 results

Sort by

Ultra Pure Water (UPW) Tester (0.000-1.999 µS/cm) - HI98309

279.00 AED
The HI98309 UPW is the first pure water tester/conductivity meter to measure in 1/1000ths of micro-Siemens and provides on-the-spot and fast checks for minute traces of contamination in your water, assuring high quality of finished products in processes. A rugged, pocket-sized tester that features graphite electrodes to reduce polarization effects. The HI98309 comes already calibrated, done with freshly prepared low-conductivity solutions in factory due to the high instability of calibration solutions in the UPW range (below 2 µS/cm).
  • Exposed temperature sensor for fast response
  • Accurate readings of ultra low range 0.000 to 1.999 µS/cm
  • Factory calibrated
  • 279.00 AED

    Portable High Range EC/TDS Meter - HI99301

    811.00 AED
    The HI99301 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. It is supplied with a two-ting conductivity probe to allow for high range EC measurements from 0.00 to 20.00 mS/cm and TDS measurements from 0.00 to 10.00 ppt. All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements.
    • One-point Automatic Calibration
    • Adjustable TDS factor
    • Automatic Temperature Compensation
    811.00 AED
    Inquire Now

    Copper High-Range Checker® Reagents (25 Tests) - HI702-25

    The HI702-25 are the replacement reagents for the HI702 Copper High-Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
    • Pre-made reagents for ease of use
    • Prepared with high-purity chemicals
    • Marked with expiration date and lot number for traceability

    HI70038P 6.44 g/L (ppt) TDS Calibration Solution (25 x 20mL)

    121.00 AED
    HI70038P is a premium quality 6.44 g/L (ppt) TDS calibration solution that is NIST traceable and contained in portable single-use sachets.. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70038P is for 25 sachets containing 20 mL of solution.
    • 6.44 g/L (ppt) TDS value
    • Temperature chart of the actual ppt value at various temperatures printed on each sachet
    • Convenient packaging for one time use
    121.00 AED

    HI70038C 6.44 g/L (ppt) TDS Calibration Solution (25 x 20mL)

    144.00 AED
    HI70038C is a premium quality 6.44 g/L (ppt) TDS calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70038C is for 25 sachets containing 20 mL of solution.
    • Supplied with Certificate of Analysis
    • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
    • Convenient packaging for one time use
    144.00 AED

    HI70030C 12880 µS/cm Conductivity Standard (25 x 20mL)

    144.00 AED
    HI70030C is a premium quality 12, 880 µS/cm conductivity solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of conductivity solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70030C is for 25 sachets containing 20 mL of solution.
    • Supplied with Certificate of Analysis
    • Temperature chart of the actual µS/cm value at various temperatures printed on each sachet
    • Convenient packaging for one time use
    144.00 AED

    Marine Nitrite Ultra Low Range Checker® HC Reagents (25 Tests) - HI764-25

    41.00 AED
    The HI764-25 are the replacement reagents for the HI764 Nitrite Ultra Low Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
    • Pre-made reagents for ease of use
    • Prepared with high-purity chemicals
    • Marked with expiration date and lot number for traceability
    41.00 AED

    edge Dissolved Oxygen Spare Screw Cap Membranes - HI764080A/P

    286.00 AED
    The HI764080A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s edge HI764080 polarographic dissolved oxygen probes. The caps are constructed of durable ABS plastic with polytetrafluoroethylene (PTFE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
    • Screw Cap Design
    • Pre-Tensioned PTFE Membranes
    286.00 AED

    ® Compatible Digital DO/Temperature Electrode - HI764080

    1,551.00 AED
    The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. The sensor features a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. The HI 764080 is designed for use with Hanna’s edge® pH/EC/DO meter.
    • Digital Probe
    • Ultra-Thin Body
    • Integrated Temperature Sensor
    • 3.5mm Connector
    1,551.00 AED

    Four-ring EC/TDS Probe with Internal Temperature Sensor – HI76312

    1,729.00 AED
    The HI76312 is a four-ring interchangeable platinum probe with built-in temperature sensor and 1 m (3.3’) cable.
    • Replacement EC/TDS probe for HI5321, HI5521, and HI5522
    • Can be used over a wide range of measurements
    • Operating temperature range -5 to 100℃ (23 to 212℉)
    1,729.00 AED

    4-Ring Conductivity Probe, DIN Connector – HI76302W

    861.00 AED
    HI76302W is a four-ring conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3') cable.
    861.00 AED

    4-Ring Conductivity Probe - HI76301

    475.00 AED
    This four-ring conductivity probe offers a versatile and accurate solution for TDS readings. A 4-ring electrode design allow for reduced polarization and surface coating effects over an extended linear range of measurement. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors and a 1m (3.3”) cable for accessing samples.
    • Four-ring probe reduces polarization
    • PVC body for increased durability
    • DIN connector
    475.00 AED
    Back to Top
    Whatsapp
    Product has been added to your cart