Showing 217–228 of 749 resultsSorted by popularity
HI83399-11 CAL Check Cuvette Kit for HI83399 Water and Wastewater Photometer
The HI83399-11 CAL Check™ Standards provides a simple method for calibrating and validating the HI83399 Water and Wastewater Photometer. This high-quality set of standards comes with a certificate of analysis.
- Absorbance values at 420 nm, 466 nm, 525 nm, 610 nm, and 0 nm
- Supplied with Certificate of Analysis
- Reusable with long shelf-life
EPA Compliant Benchtop Turbidity and Chlorine Meter - HI83414
The HI83414 is a high accuracy turbidity and chlorine benchtop meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI83414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements. For chlorine measurements an adaptation of EPA Method 330.5 and Standard Method 4500-Cl G is used.
- Compliant to EPA Methods
- Up to ±2% of reading plus 0.02 NTU accuracy
- USB for data transfer
Panel-mounted pH Analog Indicator with Self Diagnostic Test – HI8510
HI8510 is ideal for monitoring pH in process control. It provides highly accurate pH measurements and displays values on an easy-to-read LCD. BNC input, amplified probe input and input from transmitter are supported.
- Automatic temperature compensation ensures fast, accurately compensated readings
- Displays values on the easy to read LCD
- A removable, transparent splash-proof cover protects the front panel
- ±5V power output and input terminals for amplified electrodes
Multi-range EC Meter - HI8733
The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements.Four-ring probeFour measuring modesAutomatic Temperature Compensation
Three Range Portable TDS Meter - HI8734
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applicaitons. It can also be used for a wide variety of environmental conditions. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
- Four-ring probe
- measurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy
- Manual Temperature Compensation
Turbidity Calibration Standards - HI88713-11
The HI88713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range and 0.00 to 4000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.10, 15, 100, 750 FNU, and 2000 NTU
- Reusable with long shelf life stability
Generator Electrode Without Diaphragm for HI904 - HI900512
The HI900512 is a fritless, glass body coulometric generator electrode for the HI904 Karl Fischer titration system. This design offers very low drift rates and easy cell maintenance.
- Glass Body
- No Diaphragm
- Easy Cleaning
Glass Dispensing Tip for HI903 (2 pcs) - HI900523
The HI900523 is a set of 2 glass titrant dispensing tips for the HI903 Karl Fischer Titration System. The specially designed tips deliver titrant precisely into high turbulence mixing zones, ensuring a rapid reaction. Its angular construction helps prevent titrant from diffusing into the sample solvent.Anti-diffusion tipPrecise designChemically resistant
Set of 5 Septums for HI903 - HI900527
The HI900527 is a set of 5 replacement septums for the HI903 Karl Fischer Titration System. These silicone septums are designed for quick and efficient liquid sample entry into the titration cell.
- Chemically resistant
- Quick replacement
- Easy to handle
Titrant Bottle Top Assembly for HI903 - HI900530
The HI900530 is a titrant bottle top and fitting assembly for the HI903 Karl Fischer Titration System. The assembly is specially designed to keep titrant dry from ambient moisture. It is supplied with a desiccant cartridge, cartridge fitting, titrant hose fitting, O-rings, cap, and cover.
- Chemically resistant
- Quick replacement
- Easy to assemble
Solvent or Waste Bottle Top Assembly for HI903 - HI900531
The HI900531 is a solvent or waste bottle top and fitting assembly for the HI903 Karl Fischer Titration System. The assembly is specially designed to keep solvent dry from ambient moisture. It is supplied with a desiccant cartridge, cartridge fitting, hose fitting, O-rings, cap, and cover.
- Chemically resistant
- Quick replacement
- Easy to assemble
Desiccant Cartridge for Solvent or Waste for HI903 - HI900533
The HI900533 is a glass desiccant cartridge with cover designed to fit the solvent or waste bottle enclosures for the HI903 Karl Fischer Titration System.Each cartridge comes sealed and filled with dry silica gel desiccant ready for immediate use upon opening. The rechargeable, color-indicating silica gel prevents the ingress of ambient humidity in the sealed system. It’s color change allows the user to recognize when it’s adsorption capacity has depleted.
- Color indicating desiccant
- Quick replacement
- Easy to assemble
















