🔥 Special Offers

Sort by

HI9810402 HALO2 pH Meter for Lab (Refillable)

Original price was: 468.00 AED.Current price is: 458.00 AED.
The HALO2 Wireless pH Tester is designed to bring simplicity and sophistication to pH testing in a variety of settings and environments.
  • Open-source Bluetooth allows easy integration into current data logging systems
  • IP65 water resistant protection
  • Specialized electrode for spot checking pH
  • Equipped with everything you need for successful testing right out of the box
Original price was: 468.00 AED.Current price is: 458.00 AED.

Multiparameter pH/ORP/EC/TDS/Salinity/DO/Pressure/ Temperature Waterproof Meter - HI98194

Original price was: 5,900.00 AED.Current price is: 5,574.00 AED.
The HI98194 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The HI98194 is supplied with all necessary accessories and packaged in a durable carrying case.
  • 12 Parameter Dot Matrix Display
  • Multi-sensor Probe
  • Quick Calibration
Original price was: 5,900.00 AED.Current price is: 5,574.00 AED.

Portable High Range EC/TDS Meter - HI99301

Original price was: 811.00 AED.Current price is: 803.00 AED.
The HI99301 is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. It is supplied with a two-ting conductivity probe to allow for high range EC measurements from 0.00 to 20.00 mS/cm and TDS measurements from 0.00 to 10.00 ppt. All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements.
  • One-point Automatic Calibration
  • Adjustable TDS factor
  • Automatic Temperature Compensation
Original price was: 811.00 AED.Current price is: 803.00 AED.

HI7006L pH 6.86 Calibration Solution (500 mL)

Original price was: 80.00 AED.Current price is: 62.00 AED.
HI7006L is a premium quality pH 6.86 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Original price was: 80.00 AED.Current price is: 62.00 AED.

Total Chlorine Ultra Low-Range Checker® HC - HI761

Original price was: 205.00 AED.Current price is: 201.00 AED.
The Hanna Total Chlorine Ultra Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Total Chlorine Ultra Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
  • Compact, Portable Design
  • Built-in Timer
  • One-Button Operation
Original price was: 205.00 AED.Current price is: 201.00 AED.

HI7071 Electrolyte Fill Solution, 3.5M KCl + AgCl (30 mL x 4)

Original price was: 315.00 AED.Current price is: 285.00 AED.
HI7071 is a pH and ORP electrode fill solution that contains 3.5M KCl + AgCl, which is specifically made for single junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
  • Fill solution for single junction pH & ORP electrodes
  • Convenient 30 mL bottles
  • Clearly marked bottle with expiration date and lot number
Original price was: 315.00 AED.Current price is: 285.00 AED.

HI7061M General Purpose Cleaning Solution (230 mL)

Original price was: 70.00 AED.Current price is: 54.00 AED.
HI7061M is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
  • Specially formulated for cleaning electrodes
  • Air tight seal to ensure quality
  • Expiration date and lot number
Original price was: 70.00 AED.Current price is: 54.00 AED.

HI70300M Electrode Storage Solution (230 mL)

Original price was: 70.00 AED.Current price is: 54.00 AED.
HI70300M is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any diffusion/osmotic effects from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300M storage solution for at least one hour before taking measurements.
  • Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
  • Clearly marked expiration date and lot number
Original price was: 70.00 AED.Current price is: 54.00 AED.

HI7010/1G pH 10.01 Calibration Solution (1 G ( 3.78 L) )

Original price was: 240.00 AED.Current price is: 204.00 AED.
HI7010/1G is a premium quality pH 10.01 calibration solution that has been dyed violet for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Original price was: 240.00 AED.Current price is: 204.00 AED.

HI70060M pH 6.00 Calibration Solution (230 mL)

Original price was: 70.00 AED.Current price is: 54.00 AED.
HI70060M is a premium quality pH 6.0 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each sachet
Original price was: 70.00 AED.Current price is: 54.00 AED.

HI7004/1G pH 4.01 Calibration Solution (1 G ( 3.78 L))

Original price was: 250.00 AED.Current price is: 217.00 AED.
HI7004/1G is a premium quality pH 4.01 calibration solution that has been dyed red for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
  • Air-tight Seal
Original price was: 250.00 AED.Current price is: 217.00 AED.

HI70032C 1382 mg/L (ppm) TDS Calibration Solution (25 x 20mL)

Original price was: 160.00 AED.Current price is: 146.00 AED.
HI70032C is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70032C is for 25 sachets containing 20 mL of solution.
  • Supplied with Certificate of Analysis
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Convenient packaging for one time use
Original price was: 160.00 AED.Current price is: 146.00 AED.
Back to Top
Whatsapp
Product has been added to your cart