Bestsellers in Parameters
HI7004L/C pH 4.01 Calibration Solution (500 mL)
89.00 AED
HI7004L/C is a premium quality pH 4.01 calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
61.00 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 1, 382 mg/L (ppm) TDS calibration solution
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7021L 240 mV @ 25°C ORP Test Solution (500 mL)
114.00 AED
HI7021L is a quality ORP test solution made from reagent grade chemicals and used to test platinum and gold ORP electrodes. Hanna test solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Allows for a quick check of your ORP electrode
- Air tight bottle with tamper-proof seal to ensure quality
COD Low Range Reagent Vials, EPA Method (25 tests) - HI93754A-25
250.00 AED
The HI93754A-25 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.Pre-dosed reagents for ease of use Supplied with certificate of quality Marked with expiration date and lot number for traceability
*This product is classified as Dangerous Goods and can only be shipped via ground.
For Professional Use Only.
Inquire Now
Boron Chemical Test Kit for Irrigation Water - HI38074
481.00 AED
The HI38074 is a chemical test kit that measures boron in irrigation water by titration with boric acid. The HI38074 is supplied complete with all of the reagents and equipment necessary to perform 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with electronic pH meter
Refillable Double Junction pH Electrode with BNC Connector - HI1043B
788.00 AED
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass.
This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
- Refillable Electrode
- Double Junction Design
- High Temperature Glass
Glass Cuvettes for Portable Photometers and Turbidity Meters (4 pcs) - HI731331
94.00 AED
The HI731331 are the replacement glass cuvettes used with the HI96 series portable photometers and turbidity meters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731331 includes 4 cuvettes.
- Index mark for proper alignment in the photometer
- 10 ml level mark for adding correct volume
- Optically clear glass
Showing 1–12 of 109 results
HI7004L/C pH 4.01 Calibration Solution (500 mL)
89.00 AED
HI7004L/C is a premium quality pH 4.01 calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
61.00 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 1, 382 mg/L (ppm) TDS calibration solution
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7021L 240 mV @ 25°C ORP Test Solution (500 mL)
114.00 AED
HI7021L is a quality ORP test solution made from reagent grade chemicals and used to test platinum and gold ORP electrodes. Hanna test solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Allows for a quick check of your ORP electrode
- Air tight bottle with tamper-proof seal to ensure quality
COD Low Range Reagent Vials, EPA Method (25 tests) - HI93754A-25
250.00 AED
The HI93754A-25 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.Pre-dosed reagents for ease of use Supplied with certificate of quality Marked with expiration date and lot number for traceability
*This product is classified as Dangerous Goods and can only be shipped via ground.
For Professional Use Only.
Alkalinity Chemical Test Kit - HI3811
206.00 AED
The HI3811 is a chemical test kit that measures alkalinity by titration with hydrochloric acid. The HI3811 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with color indicator
ORP Electrode for Process Control and Monitoring - HI2001
680.00 AED
HI2001 is an economical process ORP probe with a BNC connector. The BNC connector is universal and works with any ORP (mV) meter that has a BNC probe input. The HI2001 is a double junction design with a polymer reference for long life in many common industrial applications.
1/2" and 3/4" NPT threads for in-line and submersion mounting
Chemically resistant PTFE junction
Universal BNC connector
GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131
703.00 AED
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 parameters, pH, EC/TDS and temperature, in one meter
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
Glass Cuvettes for Portable Photometers and Turbidity Meters (4 pcs) - HI731331
94.00 AED
The HI731331 are the replacement glass cuvettes used with the HI96 series portable photometers and turbidity meters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731331 includes 4 cuvettes.
- Index mark for proper alignment in the photometer
- 10 ml level mark for adding correct volume
- Optically clear glass
Refillable Double Junction pH Electrode with BNC Connector - HI1043B
788.00 AED
The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass.
This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
- Refillable Electrode
- Double Junction Design
- High Temperature Glass
Multiparameter pH/ORP/EC/TDS/Salinity/DO/Pressure/ Temperature Waterproof Meter - HI98194
5,421.00 AED
The HI98194 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The HI98194 is supplied with all necessary accessories and packaged in a durable carrying case.
- 12 Parameter Dot Matrix Display
- Multi-sensor Probe
- Quick Calibration
HI7006L pH 6.86 Calibration Solution (500 mL)
61.00 AED
HI7006L is a premium quality pH 6.86 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Color coded label for easy pH buffer value identification
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
HI7022L 470 mV @ 25°C ORP Test Solution (500 mL)
119.00 AED
HI7022L is a quality ORP test solution made from reagent grade chemicals and used to test platinum and gold ORP electrodes. Hanna test solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Allows for a quick check of your ORP electrode
- Air tight bottle with tamper-proof seal to ensure quality
