Showing 109–120 of 148 resultsSorted by popularity
Sulfate Test Kit - HI38000
The HI38000 is a chemical test kit that uses a turbidimetric method to measure sulfate. The HI38000 is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Visual indicator for simple determination
Digital Glass Body ORP Electrode – HI36180
HI36180 is a glass body, double junction, refillable ORP electrode with a built-in temperature sensor. This electrode has a single ceramic junction and the ORP sensing pin is made with platinum.As a digital ORP electrode, it features a built-in microchip that stores sensor type, serial number, and calibration information. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. This design consideration is ideal for laboratories and general purpose ORP measurements.
- Built-In Microchip
- Platinum Sensing Pin
- 3.5 mm Connector
PEI Body pH Electrode with Calomel References with BNC Connector - HI1343B
680.00 AED
The HI1343B is a PEI body, single junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass.
The mercury/mercury (I) chloride (Hg/Hg2Cl2) reference system provides a stable reference potential without the presence of silver. This design consideration is ideal for applications involving Tris buffer.
- Calomel References
- Refillable Electrode
- High Temperature (HT) Glass
Refillable PEI Body pH Electrode with BNC Connector - HI1332B
The HI1332B is a PEI body, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with general purpose glass, protected by an extension of the durable PEI body.
This design consideration is ideal for chemicals, quality control, field applications, and general purpose use.
- Durable PEI Body
- Double Junction Design
- Refillable Electrode
Foodcare pH Electrode for Yogurt and Creams with quick connect DIN Connector - FC2133
The FC2133 is a glass body, double junction pH electrode with built-in temperature sensor and a quick connect DIN connector. The FC2133 electrode features an open junction design with viscolene gel electrolyte, a sensing bulb made of low temperature glass, and a conical tip shape.
This design consideration is ideal for pH measurements in products such as cream, yogurt, or other semi-solid or emulsified samples. The recommended operating temperature range is from 0 to 50℃.
- Low Temperature Glass
- Conical Tip
- Open Junction
PVDF Body Foodcare pH Electrode for Dairy Products and Semi-Solid Foods - FC200B
The FC200B is a PVDF body, gel filled, single junction pH electrode with a BNC connector. This probe features an open junction design, a sensing bulb made of low temperature glass, and a food grade plastic body.
This design consideration is ideal for pH measurements in the food industry including dairy, dough, ground meats, and other semi-solid food samples. The recommended operating temperature range is from 0 to 50℃.
- Low Temperature Glass
- Open Junction
Industrial Flat Tip pH Electrode with PTFE Junction - HI1006-5m (16.4')-BNC-HT - High Temperature-None
Hanna presents a series of combination pH and ORP electrodes, including more than 300 models, incorporating over 20 years of electrode manufacturing experience.The most advanced feature of this series is the electrode shape with a flat tip, virtually eliminating deposits that can foul the electrode, significantly reducing necessary maintenance. This characteristic makes flat tip electrodes ideal for continuous in-line monitoring and for solutions containing aggressive chemicals.
- PVDF body
- Self-cleaning flat tip sensor for significantly reduced maintenance.
- Provided with an internal matching pin that can avoid typical problems caused by grounding loop current.
- 3/4" NPT external thread on both ends for easy installation
TDS Mini Controller (0 to 1999 ppm) - BL983319-2 | 115/230VAC, Output: 4-20 mA
The BL983319 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 1999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.
*The BL983319 uses a 0.65 conversion factor in which 100 µS/cm = 65 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Portable Meat pH Meter - HI99163
The HI99163 is a portable Foodcare pH/temperature meter specially designed for the meat processing industry. Automatic calibration is performed at one or two points with two sets of buffers. All calibration and measurement readings are automatically compensated for temperature variations.The HI99163 uses the PVDF body FC2323 amplified pH electrode that offers numerous features to improve pH testing for meat processors. The probe comes with the FC099 removable stainless steel blade to help users perform non-intrusive measurements of meat products, inside and out. The free diffusion junction helps to avoid a clogged reference and the external body material is non-toxic and food compatible.
- Automatic Temperature Compensation
- Automatic Two-Point Calibration
- Waterproof
Turbidity Calibration Standards - HI98703-11
440.00 AED
The HI98703-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- AMCO AEPA-1 primary turbidity standards
- Reusable with long shelf life stability
Professional Waterproof Portable pH/ORP/ISE Meter - HI98191
The HI98191 is a rugged, portable pH/ORP/ISE meter with the performance and features of a benchtop meter. This professional, waterproof meter complies with IP67 standards and measures pH, ORP, ISE, and temperature. The HI98191 is supplied with all necessary accessories to perform a pH/temperature measurement packaged into a durable carrying case.
- CAL Check™
- ISE in Choice of Concentration Units
- Ergonomic, One-Handed Operation
pH/ORP/Temperature Combo Tester - HI98121
The HI98121 is a waterproof pH, ORP and temperature meter. The housing of this tester has been completely sealed against humidity and is designed to float. Electrode replacement with the stainless steel round connector means there are no pins to bend or break during replacement. When the cloth junction becomes clogged and response time is sluggish, simply pull out 3 mm (1/8”) to clear the clogging which will improve response time and stability. The exposed stainless steel temperature sensor on these models facilitates faster and more accurate temperature measurement.
- Waterproof
- Replaceable pH Electrode
- Automatic Two-Point pH Calibration
