-
Hanna edge® EC/TDS/Salinity Meter Bundle with Calibration Standards – HI2003-02
2,651.00 AED2,385.29 AED × -
edge® Dedicated Conductivity/TDS/Salinity Meter - HI2003
12,470.00 AED2,223.00 AED -
HI7031L 1413 µS/cm Conductivity Standard (500mL Bottle)
159.00 AED53.10 AED -
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
161.00 AED54.90 AED -
HI7033L 84 µS/cm Conductivity Standard (500mL Bottle)
161.00 AED54.29 AED
Showing 541–552 of 615 resultsSorted by popularity
Wire K-Type Thermocouple Probe for Ovens - HI766Z-3m (9.84')
414.00 AED
The HI766Z is a wire K-type thermocouple probe for ovens designed for use with a thermocouple thermometer. The stainless steel wire sensor extends 1 m (3.3'), 3 m (9.9'), or 7 m (22.9') to the thermocouple connector with the meter; the HI766Z does not incorporate a handle. The thin yet sturdy wire probe allows users to obtain highly accurate readings inside ovens.
Measures up to 1100℃ (2000℉)
4 second response time
Stainless steel
Penetration K-Type Thermocouple Probe with Handle - HI766C
275.00 AED
The HI766C is a penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A green cable extends 1 m (3.3’) from the handle to the thermocouple connector with the meter. The sharp, pointed tip of the probe allows users to obtain highly accurate temperature readings of semi-solids and high-temperature samples.
- Measures up to 900℃ (1650℉)
- 15 second response time
- Stainless steel
10m (32.8')
1,687.00 AED
This galvanic dissolved oxygen probe is designed to work with the HI8410 to monitor the concentration of DO in a wide range of industrial process applications.
- Galvanic technology eliminates noise and instability.
- Built-in temperature sensor for Automatic Temperature Compensation.
- Built for everyday, demanding use in industrial applications.
Spare Dissolved Oxygen Screw Cap Membranes For Galvanic Sensors - HI76409A/P
275.00 AED
The HI76409A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s portable galvanic dissolved oxygen probes and sensors. The caps are constructed of durable ABS plastic with high density polyethylene (HDPE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
- Screw Cap Design
- Pre-tensioned Membranes
Spare Dissolved Oxygen Screw Cap Membranes - HI76407A/P
286.00 AED
The HI76407A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s portable polarographic dissolved oxygen probes. The caps are constructed of durable ABS plastic with polytetrafluoroethylene (PTFE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
- Pre-tensioned PTFE Membranes
- Screw Cap Design
HI76407 Polarographic Dissolved Oxygen Probe with 4 meter cable
850.00 AED
The HI76407/F is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. It contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. It’s protective sleeve makes it ideal for use in rugged or demanding environments.
Polarographic Sensor
Protective Sleeve
Integrated Temperature Sensor
2m (6.56')
209.00 AED
The HI7634-00 is a two-pole amperometric EC/TDS probe for panel mounted mini controllers that measure in the low range (µS/cm and ppm). This probe has a built-in temperature sensor for Automatic Temperature Compensation and a ½ " male NPT threaded connection for insertion mounting. The HI7634-00 probe provides a rapid response and high accuracy EC or TDS measurement.
- Two-pole amperometric probe
- Internal temperature sensor
- Low range measurement (µS/cm and ppm)
Dual Platinum Pin Electrode for HI903 - HI76320
1,475.00 AED
The HI76320 is a glass bodied, dual platinum pin electrode for use with the HI903 Karl Fischer titration system. Each sensor is designed for sensitive, precise, and accurate detection.
- Glass Body
- Dual Platinum Pin
- BNC Connection
Four Ring Conductivity/TDS Probe HI763133
1,486.00 AED
The HI763133 is a four-ring stainless steel conductivity/TDS probe with a built-in temperature sensor.
- Replacement probe for HI98192
- Quick connect DIN connector
- IP68 rating for continuous immersion in water
HI763100 - Digital EC/Temperature Electrode
1,551.00 AED
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. Compared to the amperometric design of other conductivity probes, the HI 763100 is potentiometric probe with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe. This electrode features an integrated microchip which stores calibration data, electrode type, and serial number. The HI 763100 is designed for use with Hanna’s edge® pH/EC/DO meter.
- Digital Probe with Built-in Microchip
- Internal Temperature Sensor
- 3.5 mm Connector
Inquire Now
Marine Calcium Checker® HC Reagents (25 Tests) - HI758-26
The HI758-26 are the replacement reagents for the HI758 Marine Calcium Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Inquire Now
Marine Calcium Checker® HC Calibration Check Set - HI758-11
The Marine Calcium Checker® HC Calibration Check Set - HI758-11 provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker®HC.
- Supplied with Certificate of Analysis
- Standard value of 400 ±20 ppm calcium @ 25℃
- Reusable with long shelf life stability
