Showing 409–420 of 563 results

Sort by

Portable Meat pH Meter - HI99163

1,929.00 AED
The HI99163 is a portable Foodcare pH/temperature meter specially designed for the meat processing industry. Automatic calibration is performed at one or two points with two sets of buffers. All calibration and measurement readings are automatically compensated for temperature variations.The HI99163 uses the PVDF body FC2323 amplified pH electrode that offers numerous features to improve pH testing for meat processors. The probe comes with the FC099 removable stainless steel blade to help users perform non-intrusive measurements of meat products, inside and out. The free diffusion junction helps to avoid a clogged reference and the external body material is non-toxic and food compatible.
  • Automatic Temperature Compensation
  • Automatic Two-Point Calibration
  • Waterproof
1,929.00 AED

Portable Waterproof pH/EC/TDS Meter (High Range) - HI991301

1,988.00 AED
The HI991301 is designed to measure pH, conductivity (EC), total dissolved solids (TDS), and temperature with a single probe. From setup to calibration all operations are performed with just two buttons. The meter is waterproof and rated for IP 67 conditions.The HI12883 pre-amplified multiparameter probe features an easy-to-clean sensor and a cloth junction that can be renewed to increase the life of the probe. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the HI12883.User-selectable features include different TDS factors from 0.45 to 1.00 and a range of temperature coefficients (β) from 0.0 to 2.4% for greater consistency and reproducibility. Standardized buffer recognition values are also selectable.These instruments easily fit in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in your way. The large, multi-level LCD displays the primary reading, temperature, and calibration guides simultaneously.
1,988.00 AED

Portable Waterproof pH/EC/TDS Meter (Low Range) - HI991300

1,988.00 AED
The HI991300 is a slim, lightweight, and waterproof portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single amplified probe. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI991300 has advanced features including a selectable EC to TDS conversion factor (0.45 - 450 ppm and 1.0 - 1000 ppm).
  • 3 in 1 amplified probe with pH, EC/TDS and temperature sensors
  • Quick Cal Mode to calibrate pH and EC/TDS with one solution
  • EC to TDS Conversion factor selectable between 0.45 and 1.0
1,988.00 AED

Turbidity Calibration Standards for HI98713 - HI98713-11

433.00 AED
The HI98713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
  • Supplied with Certificate of Analysis
  • Standard values of <0.1, 15, 100, and 750 FNU
  • Reusable with long shelf life stability
433.00 AED

Turbidity Calibration Standards - HI98703-11

440.00 AED
The HI98703-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
  • Supplied with Certificate of Analysis
  • AMCO AEPA-1 primary turbidity standards
  • Reusable with long shelf life stability
440.00 AED

Checktemp® 1 Digital Thermometer - HI98509

171.00 AED
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
  • CAL Check™
  • ℃/℉ readout
171.00 AED

Checktemp® Digital Thermometer - HI98501

163.00 AED
The HI98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
  • CAL Check™
  • ℃/℉ readout
163.00 AED
Inquire Now

Marine Salinity Waterproof Tester - HI98319

HI98319 is a digital salinity tester designed specifically for saltwater aquariums that displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity  (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water.
  • Exposed Temperature Probe for Fast Response
  • Measures salinity up to 70.00 ppt
  • Waterproof and designed to float

GroLine Waterproof EC/TDS Tester - HI98318

263.00 AED
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
  • Graphite Sensor for Reduced Polarization Effect
  • Two-Button Operation
  • Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
263.00 AED

DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312

437.00 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
  • Waterproof
  • Exposed temperature probe for fast response
  • High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
437.00 AED

DiST 2 Waterproof High-Range TDS Tester - HI98302

217.00 AED
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
  • Large Multi-level LCD
  • Exposed Temperature Probe for Fast Response
  • Simple Two-Button Operation
217.00 AED

0 FNU Turbidity Calibration Solution (230 mL) - HI9829-16

422.00 AED
HI9829-16 is a premium quality 0 FNU Turbidity Calibration Solution for use with the for the calibration of HI7609829 Turbidity Sensor on the HI9829 portable multiparameter meter in water quality applications. Hanna calibration solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
  • Solution is 0 formazin nephelometric units (FNU)
  • Tamperproof seal
  • Lot number and expiration date on each sachet
422.00 AED
Back to Top
Whatsapp
Product has been added to your cart