Showing 385–396 of 397 results

Sort by

Total Hardness Test Kit Replacement Reagents (100 tests) - HI38033-100

59 AED
The HI38033-100 are reagents for the determination of total hardness (as CaCO3) by titration with the HI38033 Total Hardness Chemical Test Kit. There are enough reagents for approximately 100 tests to be used with Hanna’s test kit. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-made reagents for ease of use
  • Prepared with high-purity chemicals
  • Marked with expiration date and lot number for traceability
59 AED

Refillable Combination ORP Electrode with BNC Connector - HI3131B

786 AED
The HI3131B is a glass body, refillable, single junction ORP electrode with a BNC connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin.This design consideration is ideal for laboratories and general purpose ORP measurements, as well as for use as an indicating electrode in ORP titrations.Refillable ElectrodeSingle Ceramic JunctionPlatinum Pin
786 AED

Compact Magnetic Mini-Stirrers with Electrode Holder - HI181-Orange

361 AED
HI181 are a family of lightweight and inexpensive magnetic mini-stirrers with an integrated electrode holder. The stirrers are compact and easy to handle, requiring very little space. Measurement setup is made simple with the adjustable electrode arm that can hold up to three 12 mm diameter or less electrodes. HI181 mini-stirrers are available in 11 colors, allowing easy recognition on crowded benchtops. Adjustable electrode arm Speedsafe™ mechanism Adjustable speed control
361 AED

Flat Tip pH Electrode for Skin and Surfaces with BNC Connector - HI1413B

583 AED
The HI1413B is a glass body, single reference junction pH electrode made with low temperature glass and a BNC connector. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe's flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. Open Junction Flat Tip Viscolene Gel Electrolyte
583 AED

pH Electrode with Conical Tip and BNC Connector - HI1053B

703 AED
The HI1053B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has three ceramic junctions in the outer reference cell for an increased flow rate of reference electrolyte and a conical pH sensing tip that is made with low temperature glass. These design considerations are ideal for emulsions, fats and creams, soil and semi-solid samples, low conductivity solutions, and for measuring samples at cooler temperatures.
  • Triple Ceramic Junction
  • Double Junction Design
  • Refillable Electrode
703 AED

pH Electrode with CPS™ (Clogging Prevention System) for Non-aqueous Titrations - HI1049B

1,023 AED
The HI1049B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. It’s compatible with all electrode filling solutions, including non-aqueous.
  • Clogging Prevention System (CPS™) Technology
  • Refillable Electrode
  • Double Junction Design
1,023 AED

pH Electrode for Process Control and Monitoring - HI1001

583 AED
The HI1001 is a flow-thru monitoring pH electrode with BNC connection and 3 m cable that has been specifically built for industrial applications. This durable electrode is composed of a PVDF body with a protective PEI sleeve around the glass bulb for resistance against mechanical stress. This sensor provides a rapid response and high accuracy pH measurements for industrial applications.
  • 1/2" NPT threads for in-line mounting
  • PTFE junction
  • BNC universal connector
583 AED

Sodium Combination Ion Selective Electrode (ISE) - FC300B

1,143 AED
The FC300B is a glass combination ion selective electrode (ISE) for the determination of sodium (Na+) ions in solution. The selective glass membrane produces a potential change due to the exchange of sodium ions on the surface of the membrane and the sample. The internal sensing elements are housed within a sturdy glass body. The FC300B is ideal for a variety of applications in laboratories, food and beverage production, and water quality analysis.
  • Refillable Glass Body
  • Single Ceramic Junction
  • Detection from 0.23 to 22, 990 mg/L Na+
1,143 AED

TDS Mini Controller (0 to 999 ppm) - BL983329-1 | 115/230VAC

692 AED
The BL983329 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. *The BL983329 uses a 0.5 conversion factor in which 100 µS/cm = 50 ppm. Multicolor LED Indicator LED changes color based on status. Fire Retardant Casing For additional safety the controllers outer case is made of fire resistant plastic. Splash Resistant Cover A clear plastic cover protects the face panel from dirt and liquids.
692 AED

Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983317-115/230VAC

692 AED
The BL983317 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to activate a dosing pump to add chemical until the desired set point is reached. Chemicals that can be dosed include nutrient solutions. The BL983327 is a closely related product that has the same measurement range but has a relay that is activated when the reading is above the set point. Multicolor LED Indicator LED changes color based on status. Fire Retardant Casing For additional safety the controllers outer case is made of fire resistant plastic. Splash Resistant Cover A clear plastic cover protects the face panel from dirt and liquids.
692 AED

Ammonia Low-Range Checker® HC - HI700

223 AED
The Hanna Ammonia Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Ammonia Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
  • Compact, Portable Design
  • Built-in Timer
  • One-Button Operation
223 AED

HI70007C pH 7.01 Calibration Buffer (25 x 20 mL) Sachets

128 AED
HI70007C is a premium quality pH 7.01 calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70007C is for 25 sachets containing 20 mL of buffer.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
128 AED
Back to Top
img
Product has been added to your cart