Showing 169–180 of 719 resultsSorted by popularity
Blackstone 5 L/h Chemical Dosing Pump -BL5
753.00 AED
BlackStone pumps have been designed to meet the ever changing needs of industry. With their broad, flat base and mounting holes for tank, shelf or floor mounting (horizontal), the pumps can be easily mounted anywhere in your plant. The rear of the pump housing also provides mounting holes to facilitate vertical mounting: wall, tank or machine. Since the pump valve assembly and controls for the unit are located on the front of the pump, there is never a problem with installation or flow adjustments.
Blackstone pumps are more accurate than standard pumps due to the positive displacement design ensuring each stroke is identical to the strokes before and after it, thus keeping the flow rate consistent. A wide range of BlackStone pumps with different dosing capacities are available for your specific dosing needs. Each pump is supplied with discharge and suction valves.
Blackstone dosing pump 2.9 L/h - BL3
753.00 AED
BlackStone pumps have been designed to meet the ever-changing needs of the industry. Thanks to the wide base and tank, shelf or floor (horizontal) mounting holes, the pumps can be easily mounted anywhere in your installation. The back of the housing also provides mounting holes to facilitate vertical mounting: wall , tank or car. Since the pump valve assembly and unit controls are located on the front of the pump, there will be no problems with installation or flow adjustment.
Blackstone pumps are more accurate than standard pumps thanks to the positive displacement system, ensuring each dose is identical to the previous and the next, thus maintaining constant flow. A wide range of BlackStone pumps with different dosing capacities are available for your specific needs. Each pump is supplied with discharge and suction valves.
General Purpose Extended Length K-Type Thermocouple Probe with Handle – HI766E2
275.00 AED
The HI766E2 is an extended length general purpose, penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3') from the handle to the thermocouple connector with the meter. The extended length and round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples.
- Measures up to 900°C (1650°F)
- 6 second response time
- Stainless steel
General Purpose K-Type Thermocouple Probe with Handle – HI766E1
275.00 AED
The HI766E1 is a general purpose, penetration K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3') from the handle to the thermocouple connector with the meter. The round, pointed tip of the probe allows users to obtain highly accurate temperature readings of a wide variety of liquid, air, and gas samples.
- Measures up to 900°C (1650°F)
- 6 second response time
- Stainless steel
pH/EC/TDS Multiparameter Probe with CAL Check – HI1285-61
491.00 AED
The HI1285-61 is a 3-in-1 pre-amplified multiparameter probe with CAL Check that measures pH, EC/TDS, and temperature within a single polypropylene body. Using this probe allows users to employ the CAL Check feature of the HI9813-61 portable multiparameter meter. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two stainless steel pins for an amperometric determination of conductivity and total dissolved solids. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. The design consideration for the HI1285-61 is ideal for measuring the pH, EC/TDS, and temperature in greenhouses, hydroponics, environmental monitoring, water treatment, and boilers and cooling towers. The HI1285-61 is designed for use with Hanna?s HI9813-61 portable multiparameter meter.
- Pre-amplified pH Electrode
- Amperometric EC/TDS Sensor
- CAL Check Compatible
Spare pH/ORP Sensor for HI769819X Probe - HI7698194-1
811.00 AED
The HI7698194-1 is a replaceable pH/ORP sensor for use with Hanna?s family of multiparameter portable meters and probes. The sensor body is constructed of durable PEI material and contains a double ceramic junction design. The HI7698194-1 contains a glass pH sensing tip with a platinum ORP sensing pin. Each module is color coded for easy installation and integration with the probe.
- PEI Sensor Body
- Ceramic Double Junction Reference
- Color Coded Sensor
Marine Nitrite Low Range Checker HC Calibration Set - HI767-11
The Marine Nitrite Low Range Checker? HC Calibration Check Set HI767-11 is a high-quality set of standards for the Nitrite Low Range Checker? HC - HI767 with a range of 0 to 999 ppb. Be confident in accurate measurements. The standards come with a Certificate of Analysis that provides the lot number, reference values, and expiration date for traceability when calibrating the Checker? HC.
- Supplied with Certificate of Analysis
- Standard value of 100 ?14 ppb nitrite at 25?
- Reusable with long shelf-life stability
Wire K-Type Thermocouple Probe for Ovens - HI766Z
306.00 AED
The HI766Z is a wire K-type thermocouple probe for ovens designed for use with a thermocouple thermometer. The stainless steel wire sensor extends 1 m (3.3?), 3 m (9.9?), or 7 m (22.9?) to the thermocouple connector with the meter; the HI766Z does not incorporate a handle. The thin yet sturdy wire probe allows users to obtain highly accurate readings inside ovens.
- Measures up to 1100? (2000?)
- 4 second response time
- Stainless steel
Round Surface K-Type Thermocouple Probe with Handle - HI766B2
325.00 AED
The HI766B2 is a round surface K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3?) from the handle to the thermocouple connector with the meter. The spring-loaded, 8 mm diameter surface of the probe allows users to obtain highly accurate temperature readings of furnaces, molds, and other high temperature, round surfaces.
- Measures up to 900? (1650?)
- 3 second response time
- Spring-loaded sensor
Surface K-Type Thermocouple Probe with Handle - HI766B
383.00 AED
The HI766B is a surface K-type thermocouple probe with a handle designed for use with a thermocouple thermometer. A cable extends 1 m (3.3?) from the handle to the thermocouple connector with the meter. The flat, 16 mm diameter surface of the probe allows users to obtain highly accurate temperature readings of furnaces, molds, and other high-temperature solid surfaces.
- Measures up to 650? (1200?)
- 8 second response time
- Stainless steel
HI1002/5 Process pH Electrode
711.00 AED
Industrial probe with a glass bodied electrode for use in aggressive chemicals. It is also easy to clean. A PEI protective sleeve gives the electrode resistance against mechanical stress.
HI1210B/5 Plastic Bodied PH Electrode, 5M Cable
638.00 AED
This combination PEI-body pH electrode is designed for industrial applications with features such as BNC connector and submersion and in-line installation capability. With it's durable design, you can count on this electrode to stand up to your process environment.
- Combination PEI-body pH electrode.
- BNC connector allows quick and easy connection to any pH/ORP meter or transmitter.
- Built for everyday, demanding use in industrial applications.
