Continue shopping “0 NTU Turbidity Calibration Standard – HI93102-0” has been added to your cart.
Showing 109–120 of 135 results
2m (6.56')
209.00 AED
The HI7634-00 is a two-pole amperometric EC/TDS probe for panel mounted mini controllers that measure in the low range (µS/cm and ppm). This probe has a built-in temperature sensor for Automatic Temperature Compensation and a ½ " male NPT threaded connection for insertion mounting. The HI7634-00 probe provides a rapid response and high accuracy EC or TDS measurement.
- Two-pole amperometric probe
- Internal temperature sensor
- Low range measurement (µS/cm and ppm)
Inquire Now
Marine Calcium Checker® HC Reagents (25 Tests) - HI758-26
The HI758-26 are the replacement reagents for the HI758 Marine Calcium Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Inquire Now
Marine Calcium Checker® HC Calibration Check Set - HI758-11
The Marine Calcium Checker® HC Calibration Check Set - HI758-11 provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker®HC.
- Supplied with Certificate of Analysis
- Standard value of 400 ±20 ppm calcium @ 25℃
- Reusable with long shelf life stability
Plastic Beaker Set, 100 mL (10) - HI740036P
74.00 AED
HI740036P is a set of plastic beakers that are supplied with some of the Hanna test kits, photometers, and meters. Each set comes with 10 beakers that have graduated markings and are used for measuring (up to 100 mL) or for sample analysis.
- Durable plastic
- Graduated volume markings
- 10 piece set
Inquire Now
Phosphate Low-Range Checker® HC Calibration Check Set - HI713-11
The Phosphate Low-Range Checker® HC Calibration Check Set - HI713-11 provides a simple solution to validating the Phosphate Low Range Checker® HC - HI713 in the range of 0.00 to 2.50 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 1.00 ±0.08 ppm phosphate @ 25℃
- Pre-measured reagent packet
Inquire Now
Phosphate Low-Range Checker® HC - HI713
The Hanna Phosphate Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Phosphate Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
HI7075 Electrolyte Solution 1.7M KNO₃, 0.7M KCl (30 mL x 4)
332.00 AED
HI7075 is a fill solution that contains 1.7M potassium nitrate (KNO3), 0.7M potassium chloride (KCl) for use in fluoride ion selective electrodes. The electrolyte level in refillable electrodes should be topped off before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for fluoride ISE
- Convenient 30 mL bottles
- Expiration date and lot number clearly marked on the bottle
HI7073L Cleaning Solution for Proteins (500 mL)
119.00 AED
The HI7073L is a special enzymatic cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with proteins. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.
- Specially formulated cleaning solution to remove proteins from a pH electrode
- Air tight bottle with tamper-proof seal to ensure quality
- Expiration date and lot number clearly marked on the bottle
HI7039L 5000 µS/cm Conductivity Standard (500 mL Bottle)
61.00 AED
HI7039L is a premium quality 5, 000 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7035L 111800 µS/cm Conductivity Standard (500 mL Bottle)
59.00 AED
HI7035L is a premium quality 111, 800 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle. Temperature chart of the actual µS/cm value at various temperatures printed on each bottleAir tight bottle with tamper-proof seal to ensure quality
HI7031M 1413 µS/cm Conductivity Standard (230mL Bottle)
54.00 AED
HI7031M is a premium quality 1, 413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
Free Chlorine Checker® Reagents (25 Tests) - HI701-25
32.00 AED
The HI701-25 are the replacement reagents for the HI701 Free Chlorine Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
