Out of stock

Checktemp® 4 Folding Thermometer – HI151-Green-No

The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.

  • CAL Check to verify meter performance
  • Waterproof to IP67 Standards
  • Wake on motion

121 AED

Estimated delivery: 29 - 30 July

Inquire Now
SKU:HI151-4
HI151 Checktemp 4 Temperature Tester

Ergonomic Design with Rubberized Grip

Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.

Waterproof Durable Casing

The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.

Penetration Probe

The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.

HI151 Checktemp 4 Temperature Tester

Instrument Quality Certificate for Traceability

HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate

CAL-Check

With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.

Wake on Motion Sensor

The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.

Checktemp®4 Temperature Tester – HI151

HI151 Checktemp®4 Temperature Tester Family

Specifications

SKU HI151-4
Name Checktemp® 4 Folding Thermometer – HI151-Green-No
Thermistor Temperature Range -50.0 to 300 °C / -58.0 to 572 °F
Thermistor Temperature Resolution 0.1 °C (-50.0 to 199.9 °C); 1 °C (200 to 300 °C)
0.1 °F (-58.0 to 199.9 °F); 1 °F (200 to 572 °F)
Thermistor Temperature Accuracy ± 0.2 °C (-30.0 to 170.0 °C); ± 0.4 °C (-50.0 to -30.0 °C and 170.0 to 199.9 °C); ± 1 °C (200 to 300 °C) ± 1 digit
±0.4 °F (-22.0 to 199.9 °F); ±0.8 °F (-58.0 to -22.0 °F);
±1 °F (200 to 392 °F); ±2 °F (392 to 572 °F) ± 1 digit
Automatic Shut-Off power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF
Battery Type/Life CR2032 3V x 2 pcs. / approx. 4000 hours of use
Environment -20.0 to 50.0 ºC (-4.0 to 122.0 ºF)
Dimensions 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”)
Weight 85 g (3.0 oz)

Ordering Info

HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.

Manuals

Checktemp® 4 Folding Thermometer – HI151-Green-No

Bestsellers

Digital Glass Body pH Electrode for General Purpose - HI11310

601 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Built-In Microchip
  • Spherical Glass Tip
  • Double Junction Reference
  • 3.5 mm Connector
Inquire Now

HALO® Bluetooth® Wireless pH Meter for Flat Surfaces - HI14142

932 AED
The HI14142 HALO is an innovative pH electrode with Bluetooth® Smart technology designed for flat surfaces Our HALO® Wireless pH Meter for Flat Surfaces has a flat tipped glass sensor and an open junction design to measure pH on flat surfaces or small volume samples. All readings are transmitted directly to your Apple or Android device or the edge®blu. One Press Connect Easily connect to the Hanna Lab App at the press of a button via Bluetooth wireless technology. Status Indicator Visible from a distance, the LED “halo” light flashes to indicate the status of the probe. Easy-to-Replace battery The HALOs CR2032 lithium ion battery is easily replaceable and lasts for approximately 500 hours.

Refillable Combination pH Electrode with BNC Connector - HI1131B

543 AED
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.
  • Refillable Electrode
  • Double Junction Design
  • High Temperature (HT) Glass
Inquire Now

Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector - FC2323

932 AED
The FC2323 is an amplified single junction pH electrode that has a built-in temperature sensor and connects to the meter with a quick connect DIN connector. This type of connector is proprietary to specific meters such as the HI98190. The FC2323 electrode features a food grade plastic PVDF body, an open junction design with viscolene gel electrolyte, a sensing bulb made of low temperature glass, and a conical tip shape. This design consideration, along with the optional stainless steel blades, is ideal for pH measurements in meat and semi-frozen food products. The recommended operating temperature range is from 0 to 50℃.
  • Low Temperature Glass
  • Stainless Steel Piercing Blade (Optional)
  • Open Junction
Inquire Now

Checktemp® 4 Folding Thermometer - HI151-Blue-No

121 AED
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
  • CAL Check to verify meter performance
  • Waterproof to IP67 Standards
  • Wake on motion
Inquire Now

Spare Electrode for PICCOLO® plus pH Tester - HI1295

277 AED
The HI1295 is a spare electrode for the HI98113 PICCOLO® plus pH Tester.

Titanium Body pH Electrode for Wastewater with Quick Connect DIN Connector - HI12963

761 AED
The HI12963 is a titanium body, gel filled, single reference junction pH electrode that has a built-in temperature sensor and a quick connect DIN connector. This type of connector is proprietary to specific meters such as the HI98190 and HI991001. The HI12963 electrode is made with general purpose glass and has an extendable cloth type junction. The design considerations are ideal for measuring the pH in industrial, municipal, and environmental applications.
  • Titanium Body
  • Built-In Temperature Sensor
  • Quick Connect DIN 
Back to Top
img
Product has been added to your cart