Bestsellers in Products
Digital Glass Body pH Electrode for General Purpose - HI11310
601 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.
The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
- Built-In Microchip
- Spherical Glass Tip
- Double Junction Reference
- 3.5 mm Connector
Refillable Combination pH Electrode with BNC Connector - HI1131B
543 AED
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass.
This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.
- Refillable Electrode
- Double Junction Design
- High Temperature (HT) Glass
Portable pH/EC/TDS/Temperature Meter - HI9811-51
710 AED
The HI9811-51 is an economical, wateproof, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature (℃) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9811-51 is most suitable for agricultural, greenhouse and hydroponic applications.
- 3 in 1 probe with pH, EC/TDS and temperature sensors
- Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
- Large LCD with instructions
Digital Glass Body pH Electrode with Matching Pin for General Purpose - HI11311
681 AED
The HI11311 is a glass body, refillable, double junction pH electrode with a matching pin and a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.
The matching pin integrated into the HI11311 is for the Sensor Check™ capability of the edge pH meter; this feature is used to identify problems with the pH electrode such as cracks in the sensing glass or poor condition of the reference junction.
The HI11311 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
- Matching Pin for enabling Sensor Check feature that alerts to a broken electrode or clogged junction
- Double Junction Reference
- 3.5 mm Connector
Marine Phosphate Ultra Low Range Checker® HC - HI774
223 AED
The Hanna Phosphate Ultra Low Range (0.00 to 0.90 ppm) Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light-sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Phosphate Ultra Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Foodcare Meat pH Tester - HI981036
412 AED
The HI981036 Meat pH Tester has been carefully designed to take direct pH measurements during meat processing. The built-in probe features an open reference junction, conical glass tip, and a removable sleeve design, making it ideal for measuring the pH of meat.
- 0.01 resolution with ±0.05 pH accuracy
- Specialized electrode for spot checking the pH during meat processing
- Comes with everything necessary to start measuring right away
DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312
412 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
- Waterproof
- Exposed temperature probe for fast response
- High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
Showing 1–12 of 59 results
Turbidity Calibration Standards for HI98713 - HI98713-11
408 AED
The HI98713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.1, 15, 100, and 750 FNU
- Reusable with long shelf life stability
Checktemp® 1 Digital Thermometer - HI98509
161 AED
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
- CAL Check™
- ℃/℉ readout
Checktemp® Digital Thermometer - HI98501
153 AED
The HI98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
- CAL Check™
- ℃/℉ readout
Marine Salinity Waterproof Tester - HI98319
288 AED
HI98319 is a digital salinity tester designed specifically for saltwater aquariums that displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water.
- Exposed Temperature Probe for Fast Response
- Measures salinity up to 70.00 ppt
- Waterproof and designed to float
DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312
412 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
- Waterproof
- Exposed temperature probe for fast response
- High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
10 ppm and 100 ppm Ammonium Calibration Standard Sachets for HI9829 (10 x 20 mL each) - HI9829-10/11
277 AED
HI9829-10/11 is for premium quality 10 ppm and 100 ppm (mg/L) Ammonium (as N) calibration standards. These standards are used to calibrate the HI7609829-10 ammonium ISE. Each sachet has the lot number and expiration date stamped on it. The sachet is made of light block and air-tight foil ensuring freshness each time one is used. The HI9829-10/11 contains 10 sachets, each of the 10 ppm and 100 ppm Ammonium Calibration Standard (as N). Each sachet contains approximately 20 mL of buffer.
- Pre-mixed to exact standard value
- pH and ionic strength stabilized
- Lot number and expiration date on each sachet
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option-No-Basic probe - with turbidity-10m (32.8')
12,483 AED
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from the meter. An optional GPS provides location tracking of measurements. The complete system is simple to setup and easy to use. The HI9829 is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case.
Quick Calibration Solution (500mL Bottle) - HI9828-25
150 AED
HI9828-25 is a quick calibration solution for use with Hanna’s family of portable multiparameter meters. It provides for a single point of calibration for pH and conductivity and is ideal for field use.
- Single, Field Ready Calibration
- Leak Proof Portable Solution
Portable pH/EC/TDS/Temperature Meter - HI9811-51
710 AED
The HI9811-51 is an economical, wateproof, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature (℃) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9811-51 is most suitable for agricultural, greenhouse and hydroponic applications.
- 3 in 1 probe with pH, EC/TDS and temperature sensors
- Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
- Large LCD with instructions
pHep+ Waterproof Pocket pH Tester with 0.01 pH Resolution - HI98108
208 AED
HI98108 pHep+ is a compact, waterproof pH tester with a range from 0.00 to 14.00 pH, resolution of 0.01 pH, and ±0.10 pH accuracy.
- Compact, waterproof design
- Calibration up to 3 points
- For environmental, field, and laboratory testing
pHep Waterproof Pocket pH Tester with 0.1 pH Resolution - HI98107
168 AED
Hanna's HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
- Extractable Cloth Junction to Extend pH Electrode Life
- Has Automatic Temperature Compensation
- For Use in Fresh Water
Skin and Scalp pH Tester - HI981037
412 AED
The HI981037 Skin & Scalp pH Tester is designed to measure the pH of the skin and scalp. The built-in probe features an open reference junction, flat tip, and uses a non-flowing gelled reference electrolyte making it ideal for measuring the pH of surface of skin & scalp
- ±0.05 pH accuracy
- Specialized electrode for spot checking the pH of skin and scalp
- Comes with everything necessary to start measuring right away