In Stock

Pump Calibration Standard for Titratable Acidity in Dairy Mini Titrator – HI84529-55

The HI84529-55 is a 230 mL bottle of pump calibration standard that is used to calibrate the dosing system of the HI84529 Titratable Acidity Mini Titrator for Dairy Analysis.A calibrated dosing pump allows for the accurate determination of the amount of titrant used when performing a titration. The amount of volume dosed along with the concentration of the titrant is used by the pre-programmed formula within the HI84529 in determining the exact titratable acidity. The pump calibration procedure should be performed anytime the titrant or pH electrode is replaced. Routine calibration is recommended to ensure the highest of accuracy when performing a titration.

  • Pre-measured solution
  • Clearly marked expiration date and lot number
  • Air tight bottle with tamper-proof seal

113.00 AED

Estimated delivery: 16 - 17 February

SKU:HI84529-55

The HI84529-55 is a 230 mL bottle of pump calibration standard solution that is used for both low and high range determination of acidity in dairy products.The amount of pump calibrations performed will vary on the range selected.The determination of acidity is made according to a neutralization reaction in which the acids found in dairy products are neutralized by a base. In the United States the acidity of dairy products is usually expressed in terms of lactic acid (% l.a.). Other units of measure include degree Soxhlet Henkel (°SH), degree Dornic (°D) and degree Thorner (°Th).Analysis of titratable acidity in dairy, as performed on the HI84529 mini titrator, utilizes a simple sample preparation, a high quality titrant dosing pump, potentiometric endpoint detector, and automatic computations. As the titrant comes pre-standardized, it is important to determine the amount of titrant delivered by the dosing pump by performing a pump calibration procedure. In this procedure, the analysis of a known volume of a known solution is titrated with to a fixed pH endpoint determined by the FC260B pH electrode and HI5315 reference electrode.The HI84529-55 pump calibration solution is used for both the low and high ranges, but the volume used will based on the selected range. The Low Range 20 range uses 1 mL while the Low Range 50 uses 2 mL; the High Range 20 range uses 10 mL of the pump calibration solution. The pump calibration procedure should be performed anytime the titrant, syringe, tubing or pH electrode is replaced. It is recommended to do a pump calibration every time a new set of titrations are to be performed.Replacement reagents required to operate the HI84529 include:

Low Range 20 (LR 20) – %l.a.: 0.01 to 0.20Low Range 50 (LR 50) – %l.a.: 0.01 to 0.20High Range 20 (HR 20) – %l.a.: 0.1 to 2.0
Pump calibration standardHI84529-55HI84529-55HI84529-55
Titrant solutionHI84529-50HI84529-52HI84529-51

Specifications

SKUHI84529-55
NamePump Calibration Standard for Titratable Acidity in Dairy Mini Titrator – HI84529-55
DescriptionPump Calibration Standard for Titratable Acidity in Dairy Mini Titrator
Packagebottle
Quantity1
Size230 mL

Manuals

Pump Calibration Standard for Titratable Acidity in Dairy Mini Titrator – HI84529-55U

Bestsellers

Digital Glass Body pH Electrode for General Purpose - HI11310

638.00 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Built-In Microchip
  • Spherical Glass Tip
  • Double Junction Reference
  • 3.5 mm Connector
Inquire Now

HALO® Bluetooth® Wireless pH Meter for Flat Surfaces - HI14142

989.00 AED
The HI14142 HALO is an innovative pH electrode with Bluetooth® Smart technology designed for flat surfaces Our HALO® Wireless pH Meter for Flat Surfaces has a flat tipped glass sensor and an open junction design to measure pH on flat surfaces or small volume samples. All readings are transmitted directly to your Apple or Android device or the edge®blu.One Press Connect Easily connect to the Hanna Lab App at the press of a button via Bluetooth wireless technology.Status Indicator Visible from a distance, the LED “halo” light flashes to indicate the status of the probe.Easy-to-Replace battery The HALOs CR2032 lithium ion battery is easily replaceable and lasts for approximately 500 hours.
Inquire Now

Refillable Combination pH Electrode with BNC Connector - HI1131B

576.00 AED
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.
  • Refillable Electrode
  • Double Junction Design
  • High Temperature (HT) Glass
Inquire Now

Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector - FC2323

989.00 AED
The FC2323 is an amplified single junction pH electrode that has a built-in temperature sensor and connects to the meter with a quick connect DIN connector. This type of connector is proprietary to specific meters such as the HI98190. The FC2323 electrode features a food grade plastic PVDF body, an open junction design with viscolene gel electrolyte, a sensing bulb made of low temperature glass, and a conical tip shape. This design consideration, along with the optional stainless steel blades, is ideal for pH measurements in meat and semi-frozen food products. The recommended operating temperature range is from 0 to 50℃.
  • Low Temperature Glass
  • Stainless Steel Piercing Blade (Optional)
  • Open Junction

GroLine pH 7.01 Calibration Buffer (500mL) - HI7007-050

61.00 AED
HI7007-050 is a high quality pH 7.01 calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.02 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Inquire Now

Checktemp® 4 Folding Thermometer - HI151-Blue-No

129.00 AED
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
  • CAL Check to verify meter performance
  • Waterproof to IP67 Standards
  • Wake on motion
Inquire Now

Spare Electrode for PICCOLO® plus pH Tester - HI1295

294.00 AED
The HI1295 is a spare electrode for the HI98113 PICCOLO® plus pH Tester.
Back to Top
Whatsapp
Product has been added to your cart