-
-
Wastewater Multiparameter (with COD) Benchtop Photometer and pH meter - HI83314 (230V)
14,584.00 AED4,125.60 AED -
COD Test Tube Heater - HI839800 (230V)
14,600.00 AED4,140.00 AED -
-
HI7082L Electrolyte Solution 3.5M KCl (500 mL)
1302.00 AED271.80 AED -
HI7061L General Purpose Cleaning Solution (500 mL)
161.00 AED54.90 AED -
-
Benchtop pH/mV Meter with 0.01 Resolution - HI2211
11,825.00 AED1,642.50 AED -
HI7004/1L pH 4.01 Calibration Solution (1 L)
177.00 AED69.30 AED -
HI7007/1L pH 7.01 Calibration Solution (1 L)
177.00 AED69.30 AED -
HI7010/1L pH 10.01 Calibration Solution (1 L)
177.00 AED68.53 AED -
Showing 85–96 of 185 resultsSorted by popularity
Combo pH/Conductivity/TDS Tester (High Range) - HI98130
634.00 AED
The HI98130 makes measuring pH quick and easy! This lightweight, waterproof tester offers high accuracy pH, high range EC/TDS (0.00 to 20.00 mS/cm EC/ 0.00 to 10.00 ppt TDS) and temperature measurements in a single handheld unit! No more switching between meters for your routine measurements. Great for hydroponics, aquariums, pools, & ponds
- Wide range of 0.00 to 14.00 pH
- Replaceable pH electrode with extractable junction
- Selectable EC to TDS conversion factor of either a 0.45 or 1.0 β (BETA)
GroLine Hydroponics Waterproof pH/EC/TDS/Temperature Portable Meter - HI9814
869.00 AED
The HI9814 is a slim, lightweight, waterproof, portable meter that measures the pH, conductivity (EC), total dissolved solids (TDS), and temperature of nutrient solutions used in hydroponics, aquaponics and greenhouse growing. The meter has two-button operation, one for turning the meter on/off and calibration while the other switches between the measurement modes. The HI9814 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 in 1 amplified probe with pH, EC/TDS and temperature sensors
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- EC to TDS Conversion factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
DiST 3 Waterproof Low-Range EC Tester - HI98303
217.00 AED
The Hanna Instruments HI98303 DiST 3 is a low-range electrolytic conductivity (EC) tester than can measure up to 2000 µS/cm; making it ideal to monitor a variety of water quality applications including drinking water, water conditioning, irrigation water, and environmental monitoring. The DiST 3 is a rugged and reliable pocket-sized tester for use in the lab or field.
- Measures up to 2000 µS/cm
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
Marine Nitrite Ultra Low Range Checker® HC Reagents (25 Tests) - HI764-25
41.00 AED
The HI764-25 are the replacement reagents for the HI764 Nitrite Ultra Low Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
Double Junction pH/ORP Sensor for HI9829 Multiparameter Portable Meter - HI7609829-1
811.00 AED
The HI7698194-1 is a replaceable pH/ORP sensor for use with Hanna’s HI9829 multiparameter portable meter. The sensor body is constructed of durable PEI material and contains a double ceramic junction design. The HI7609829-1 contains a glass pH sensing tip with a platinum ORP sensing pin. Each module is color coded for easy installation and integration with the probe.
- PEI Sensor Body
- Ceramic Double Junction Reference
- Color Coded Sensor
Shockproof Rubber Boot (Blue) - HI710029
117.00 AED
HI710029 is a blue shockproof rubber boot designed to protect your Hanna portable meter and provides easier handling. This special boot helps prevent damage due to accidental drops. It can withstand high temperatures of up to 200℃ (392℉).
- Increased tactile feel
- Meter face and connection openings
- Durable
HI7074L Electrode Cleaning Solution for Inorganic Substances (500 mL)
119.00 AED
The HI7074L is a highly effective cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with inorganic substances. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.
- Specially formulated cleaning solution to remove proteins from a pH electrode
- Air tight seal to ensure quality and efficiency of cleaning solution
- Expiration date and lot number clearly marked on the bottle
HI7071 Electrolyte Fill Solution, 3.5M KCl + AgCl (30 mL x 4)
265.00 AED
HI7071 is a pH and ORP electrode fill solution that contains 3.5M KCl + AgCl, which is specifically made for single junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for single junction pH & ORP electrodes
- Convenient 30 mL bottles
- Clearly marked bottle with expiration date and lot number
HI7061M General Purpose Cleaning Solution (230 mL)
54.00 AED
HI7061M is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
111, 800 µS/cm Conductivity Standard (1 L) – HI7035/1L
77.00 AED
HI7035/1L is a premium quality 111, 800 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
80, 000 µS/cm Conductivity Standard (1 L) – HI7034/1L
77.00 AED
HI7034/1L is a premium quality 80, 000 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7010/1G pH 10.01 Calibration Solution (1 G ( 3.78 L) )
200.00 AED
HI7010/1G is a premium quality pH 10.01 calibration solution that has been dyed violet for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
- Color coded label for easy pH buffer value identification
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
