Showing 73–84 of 172 results
Total Nitrogen High Range Reagents (50 tests) - HI93767B-50
539.00 AED
The HI93767B-50 are reagents for the high range colorimetric determination of total nitrogen. There are enough reagents for 50 tests to be used with a compatible photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Free Chlorine CAL Check™ Standards - HI97701-11
618.00 AED
The HI97701-11 Free Chlorine Cal Check standards provides a simple solution to calibrating and validating the compatible free chlorine portable photometers that have a 0.00 to 5.00 mg/L (ppm) range. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the appropriate free chlorine photometer.
- Pre-dosed reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Portable pH/EC/TDS Meter - HI9810-61
753.00 AED
The HI9810-61 is an economical, wateproof, portable meter that measures pH, conductivity (EC), and total dissolved solids (TDS) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9810-61 is most suitable for agricultural, greenhouse and hydroponic applications.
- 3 in 1 probe with pH, EC/TDS and temperature sensors
- Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
- Large LCD with instructions
pHep®4 pH/Temperature Tester - HI98127
391.00 AED
Hanna's pHep®4 waterproof tester is an advanced meter has many features that can be found in portable and benchtop meters. This ergonomic meter measures from -2.0 to 16.0 pH with an accuracy of ±0.1 pH. pHep®4 features automatic one or two-point calibration and automatic temperature compensation. The large multi level LCD display shows both pH and temperature readings simultaneously, while a stability indicator is displayed to alert the user when a stable reading has been obtained. The pHep®4 tester also features a replaceable pH probe that has a unique extendable cloth junction to clear any clogging that occurs.
- Waterproof
- Replaceable pH Electrode
- Automatic Two-Point pH Calibration
Combo pH/Conductivity/TDS Tester (High Range) - HI98130
634.00 AED
The HI98130 makes measuring pH quick and easy! This lightweight, waterproof tester offers high accuracy pH, high range EC/TDS (0.00 to 20.00 mS/cm EC/ 0.00 to 10.00 ppt TDS) and temperature measurements in a single handheld unit! No more switching between meters for your routine measurements. Great for hydroponics, aquariums, pools, & ponds
- Wide range of 0.00 to 14.00 pH
- Replaceable pH electrode with extractable junction
- Selectable EC to TDS conversion factor of either a 0.45 or 1.0 β (BETA)
GroLine Hydroponics Waterproof pH/EC/TDS/Temperature Portable Meter - HI9814
869.00 AED
The HI9814 is a slim, lightweight, waterproof, portable meter that measures the pH, conductivity (EC), total dissolved solids (TDS), and temperature of nutrient solutions used in hydroponics, aquaponics and greenhouse growing. The meter has two-button operation, one for turning the meter on/off and calibration while the other switches between the measurement modes. The HI9814 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 in 1 amplified probe with pH, EC/TDS and temperature sensors
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- EC to TDS Conversion factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
DiST 3 Waterproof Low-Range EC Tester - HI98303
217.00 AED
The Hanna Instruments HI98303 DiST 3 is a low-range electrolytic conductivity (EC) tester than can measure up to 2000 µS/cm; making it ideal to monitor a variety of water quality applications including drinking water, water conditioning, irrigation water, and environmental monitoring. The DiST 3 is a rugged and reliable pocket-sized tester for use in the lab or field.
- Measures up to 2000 µS/cm
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
Marine Nitrite Ultra Low Range Checker® HC Reagents (25 Tests) - HI764-25
41.00 AED
The HI764-25 are the replacement reagents for the HI764 Nitrite Ultra Low Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
Double Junction pH/ORP Sensor for HI9829 Multiparameter Portable Meter - HI7609829-1
811.00 AED
The HI7698194-1 is a replaceable pH/ORP sensor for use with Hanna’s HI9829 multiparameter portable meter. The sensor body is constructed of durable PEI material and contains a double ceramic junction design. The HI7609829-1 contains a glass pH sensing tip with a platinum ORP sensing pin. Each module is color coded for easy installation and integration with the probe.
- PEI Sensor Body
- Ceramic Double Junction Reference
- Color Coded Sensor
Shockproof Rubber Boot (Blue) - HI710029
117.00 AED
HI710029 is a blue shockproof rubber boot designed to protect your Hanna portable meter and provides easier handling. This special boot helps prevent damage due to accidental drops. It can withstand high temperatures of up to 200℃ (392℉).
- Increased tactile feel
- Meter face and connection openings
- Durable
HI7074L Electrode Cleaning Solution for Inorganic Substances (500 mL)
119.00 AED
The HI7074L is a highly effective cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with inorganic substances. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.
- Specially formulated cleaning solution to remove proteins from a pH electrode
- Air tight seal to ensure quality and efficiency of cleaning solution
- Expiration date and lot number clearly marked on the bottle
HI7071 Electrolyte Fill Solution, 3.5M KCl + AgCl (30 mL x 4)
265.00 AED
HI7071 is a pH and ORP electrode fill solution that contains 3.5M KCl + AgCl, which is specifically made for single junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for single junction pH & ORP electrodes
- Convenient 30 mL bottles
- Clearly marked bottle with expiration date and lot number
