Bestsellers in Iron
Inquire Now
Iron High Range CAL Check Standards - HI96721-11
713.00 AED
The HI96721-11 Iron High Range CAL Check Standards provides a simple solution to calibrating and validating the HI96721 iron photometer. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values and expiration date for traceability when certifying the HI96721.
- Supplied with Certificate of Analysis
- Standard value of 1.50 ±0.01 mg/L (ppm) iron @ 25℃
- Reusable with long shelf life stability
Microfiber Cloth for Wiping Cuvettes (4) - HI731318
62.00 AED
HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints from the vials so that the glass is clean for the unimpeded transmission of light.
- Lint free
- Will not scratch glass cuvettes
Iron High Range Reagents (300 tests) - HI93721-03
263.00 AED
The HI93721-03 are reagents for the colorimetric determination of iron. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Inquire Now
Total Hardness and Iron Low-Range Portable Photometer with CAL Check – HI97741
HI97741 is an advanced portable photometer for the measurement of total hardness and iron in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable measurements.
- No warm up time before taking a measurement
- Tutorial mode for step-by-step instructions
- CAL Check to verify meter performance
Cuvette Cleaning Solution (230 mL) - HI93703-50
130.00 AED
HI93703-50 is an alcohol based cleaning solution for cuvettes/vials used in photometers and turbidity meters. This anti-static solution ensures the glass cuvette used for colorimetric and turbidimetric measurements remains clean and free from imperfections.
- Anti-static
- Air tight seal
- Marked with lot number and expiration date
Iron Low Range Reagents (50 tests) - HI93746-01
246.00 AED
The HI93746-01 are reagents for the colorimetric determination of low range iron. There are enough reagents for 50 tests to be used with a compatible benchtop or portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-dosed reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Iron (Fe²⁺ & Fe³⁺) Low Range Checker Disc Chemical Test Kit - HI38039
336.00 AED
The HI38039 is a chemical test kit that uses the phenanthroline method to measure total iron in the low range. The HI38039 is supplied complete with all of the reagents and equipment necessary including the Checker® disc. The Checker® disc makes concentration determination more accurate and easier than a typical color comparator. The test kit contains enough reagents to perform 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Checker® disc for more accurate determination
Showing 1–12 of 21 resultsSorted by popularity
Inquire Now
iris Visible Spectrophotometer - HI801 (230V)
The HI801 iris is a sleek and intuitive spectrophotometer that allows for measurement of all wavelengths of visible light.Customize your methods, take a wide range of measurements, and feel confident in your testing accuracy with iris.
- iris features precise wavelength selection between 340 nm to 900 nm for complete method compliance and accuracy that is necessary in industries like professional laboratories, water treatment facilities, wineries, and more.
- Results are consistent and accurate regardless of throughput with the high quality and uniquely designed optics system.
- Customization options include multiple cuvette shapes and sizes, custom calibration curves, and methods.
Multiparameter Benchtop Photometer and pH meter - HI83300 (230V)
4,268.00 AED
HI83300 is a compact, multiparameter photometer for use in the lab or in the field. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 60 different programmed methods measuring 37 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves.To save valuable laboratory benchtop space, the HI83300 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterAbsorbance measuring modeAllows performance verification using CAL Check standards
Water Conditioning Photometer - HI83308 (230V)
2,358.00 AED
HI83308 is a compact, multiparameter photometer for use in water conditioning applications. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 23 different programmed methods measuring 15 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Water conditioning parameters include fluoride, chlorine, ammonia, manganese, copper, iron, silver and zinc.To save valuable laboratory benchtop space, the HI83308 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterAbsorbance measuring mode
Water & Wastewater Multiparameter (with COD) Photometer and pH meter - HI83399 (230V)
5,243.00 AED
HI83399 is a compact, multiparameter photometer for measuring key water and wastewater quality parameters. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. 40 key water and wastewater quality parameters with 73 different methods covering multiple ranges are programmed into the meter. Wastewater treatment digestion parameters include COD, Total Nitrogen and Total Phosphorous which are important for monitoring nutrient removal. The HI83399 also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves.To save valuable laboratory benchtop space, the HI83399 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterWater and Wastewater Treatment Digestion ParametersAllows measurement of COD, Total Nitrogen and Total Phosphorus
COD Test Tube Heater - HI839800 (230V)
4,600.00 AED
The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150℃ and 105℃. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display.
- Low and high temperature alerts
- Built-in countdown timer
- Status indicator lights
Holmium Oxide Glass Filter for Spectrophotometers - HI801-11
989.00 AED
The HI801-11 is a holmium oxide glass filter that is used to validate the wavelength accuracy of the HI801 iris spectrophotometer. The filter is mounted in a 10 mm square anodized holder and comes with a protective plastic holder that protects the filter when not in use.
- Glass filter mounted in anodized aluminum holder
- Fits all spectrophotometers that can accommodate 10 mm square cuvette
- Absorbance peaks measured at 361, 454, 536, and 638 nm
Iron High Range Reagents (100 tests) - HI93721-01
94.00 AED
The HI93721-01 are reagents for the colorimetric determination of iron. There are enough reagents for 100 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-dosed reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Iron High Range Reagents (300 tests) - HI93721-03
263.00 AED
The HI93721-03 are reagents for the colorimetric determination of iron. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Iron (II) Reagents (100 tests) – HI96776-01
124.00 AED
The HI96776-01 are reagents for the colorimetric determination of Iron (II). There are enough reagents for 100 tests to be used with Hanna’s compatible photometers. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number
Iron II and III Reagent Set (100 tests) – HI96777-01
109.00 AED
The HI96777-01 are reagents for the colorimetric determination of Iron II and III. There are enough reagents for 100 tests to be used with Hanna’s compatible photometers. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number
Iron Checker® Reagents (25 Tests) - HI721-25
32.00 AED
The HI721-25 are the replacement reagents for the HI721 Iron Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Iron Checker® HC Calibration Check Set - HI721-11
51.00 AED
The Iron Checker® HC Calibration Check Set - HI721-11 provides a simple solution to validating the Iron Checker® HC - HI721 that has a range of 0.00 to 5.00 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 1.00 ±0.06 ppm iron @ 25℃
- Reusable with long shelf life stability
