Bestsellers in TDS
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
61.00 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 1, 382 mg/L (ppm) TDS calibration solution
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131
703.00 AED
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 parameters, pH, EC/TDS and temperature, in one meter
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
Inquire Now
Glass Cuvettes for Portable Photometers and Turbidity Meters (4 pcs) - HI731331
94.00 AED
The HI731331 are the replacement glass cuvettes used with the HI96 series portable photometers and turbidity meters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731331 includes 4 cuvettes.
- Index mark for proper alignment in the photometer
- 10 ml level mark for adding correct volume
- Optically clear glass
Inquire Now
Conductivity (EC) Controller (0.0 - 199.9 µS/cm) - BL983320-1 | 115/230VAC
734.00 AED
The BL983320 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0.0 to 199.9 µS/cm range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983320 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Multiparameter pH/ORP/EC/TDS/Salinity/DO/Pressure/ Temperature Waterproof Meter - HI98194
5,421.00 AED
The HI98194 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The HI98194 is supplied with all necessary accessories and packaged in a durable carrying case.
- 12 Parameter Dot Matrix Display
- Multi-sensor Probe
- Quick Calibration
Inquire Now
Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983317-2 | 115/230VAC, Output: 4-20 mA
811.00 AED
The BL983317 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to activate a dosing pump to add chemical until the desired set point is reached. Chemicals that can be dosed include nutrient solutions.
The BL983327 is a closely related product that has the same measurement range but has a relay that is activated when the reading is above the set point.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
Inquire Now
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option-Yes-Basic probe - with turbidity-4m (13')
16,744.00 AED
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from the meter. An optional GPS provides location tracking of measurements. The complete system is simple to setup and easy to use. The HI9829 is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case.
Showing 1–12 of 14 results
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
61.00 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 1, 382 mg/L (ppm) TDS calibration solution
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131
703.00 AED
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 parameters, pH, EC/TDS and temperature, in one meter
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
Multiparameter pH/ORP/EC/TDS/Salinity/DO/Pressure/ Temperature Waterproof Meter - HI98194
5,421.00 AED
The HI98194 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The HI98194 is supplied with all necessary accessories and packaged in a durable carrying case.
- 12 Parameter Dot Matrix Display
- Multi-sensor Probe
- Quick Calibration
edge® Multiparameter pH Meter - HI2020
1,795.00 AED
edge® tablet style meter is a groundbreaking design that is the culmination of Hanna?s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5? thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with a simplified menu and options. For those who require advanced features there is the full featured standard operating mode. The edge HI2020 pH kit can be upgraded at any time with additional probes to measure Conductivity or Dissolved Oxygen.
Three Range Portable TDS Meter - HI8734
1,737.00 AED
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applicaitons. It can also be used for a wide variety of environmental conditions. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
- Four-ring probe
- measurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy
- Manual Temperature Compensation
Multiparameter pH/ORP/EC/Pressure/Temperature Waterproof Meter - HI98195
4,109.00 AED
The HI98195 is a waterproof portable logging multiparameter meter that monitors up to 10 different water quality parameters including 5 measured and 5 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The complete system is simple to setup and easy to use. The HI98195 is supplied with all necessary accessories and packaged in a durable carrying case.
- Multi-Parameter Display
- Multi-sensor Probe
- USB Connection
Ultra Pure Water EC/Resistivity Waterproof Portable Meter - HI98197
5,459.00 AED
The HI98197 is a rugged portable EC/TDS/Resistivity/Salinity meter with the performance and features of a benchtop. The HI98197 is supplied complete with all accessories necessary to perform high purity water measurements packaged into a durable carrying case. The accessories include a stainless steel flow cell and a threaded four ring conductivity probe that allows for high resolution 0.001 µS/cm for conductivity and 0.1 Mω * cm for resistivity readings.
- Stainless steel flow cell
- Four ring conductivity/resistivity probe
- 0.001 µS/cm resolution
4-Ring Conductivity Probe, DIN Connector – HI76302W
861.00 AED
HI76302W is a four-ring conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3') cable.
4-Ring Conductivity Probe - HI76301
475.00 AED
This four-ring conductivity probe offers a versatile and accurate solution for TDS readings. A 4-ring electrode design allow for reduced polarization and surface coating effects over an extended linear range of measurement. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors and a 1m (3.3”) cable for accessing samples.
- Four-ring probe reduces polarization
- PVC body for increased durability
- DIN connector
Total Hardness LR Checker HC Handheld Colorimeter
The HI735 Total Hardness Low Range handheld checker is designed to determine total hardness (as CaCO3) in drinking and process water, heating and cooling systems, swimming pools and spas. Also suitable to be used in agriculture, food and beverage industries. HI735 features a single-button operation system and is easy to use. The large LCD is easy to read and the auto shut-off feature assures the battery will not be drained.
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
Pool Line ISO Portable Turbidity Meter – HI987134 (230V)
The HI987134 is a high accuracy portable turbidity meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI987134 meets and exceeds the requirements of the ISO 7027 Method for turbidimetric measurements.
- Fast Tracker™ - Tag Identification System (T.I.S)
- USB for data transfer
- Up to four-point calibration
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option-Yes-Basic probe - with turbidity-10m (32.8')
17,187.00 AED
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from the meter. An optional GPS provides location tracking of measurements. The complete system is simple to setup and easy to use. The HI9829 is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case.
