Showing 25–36 of 2445 results
Inquire Now
Boron Chemical Test Kit for Irrigation Water - HI38074
481.00 AED
The HI38074 is a chemical test kit that measures boron in irrigation water by titration with boric acid. The HI38074 is supplied complete with all of the reagents and equipment necessary to perform 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with electronic pH meter
pH/EC/TDS Multiparameter Probe for use with HI9814 - HI1285-7
491.00 AED
The HI1285-7 is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two stainless steel pins for an amperometric determination of conductivity and total dissolved solids. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. The design consideration for the HI1285-7 is ideal for measuring the pH, EC/TDS, and temperature in greenhouses, hydroponics, and other agricultural applications. The HI1285-7 is designed for use with Hanna’s HI9814 portable multiparameter meter.
- Pre-amplified pH Electrode
- Amperometric EC/TDS Sensor
- CAL Check Compatible
HI731336N Caps for Glass Cuvette Used with HI977 Series Portable Photometers (4 pcs)
59.00 AED
The HI731336N are the replacement caps that screw on the glass cuvettes used with the HI977xx series portable photometers. Each cap has a locking indexing tab that ensures the cuvette is inserted into the photometer in the same position. The caps are also used to block any light that would interfere with the optically based measurement. The HI731336N includes 4 caps.
- Locking index tab for proper alignment in the photometer
- Light blocking to prevent stray light from entering
HI77400C pH 4.01 and 7.01 Calibration Buffer Sachets (10 x 20mL, 5 Each)
73.00 AED
HI77400C is a set of premium quality pH 4.01 and 7.01 calibration buffer solutions that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI77400C is for 5 sachets of pH 4.01 and 5 sachets of pH 7.01 with each containing 20 mL of buffer.
- Supplied with Certificate of Analysis
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
HI70300L Electrode Storage Solution (500 mL)
59.00 AED
HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any effects of diffusion/osmotic from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300L storage solution for at least one hour before taking measurements.
- Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
- Manufactured specifically for pH and ORP electrodes
- Clearly marked expiration date and lot number
Inquire Now
HALO® Bluetooth® Wireless pH Meter for Flat Surfaces - HI14142
989.00 AED
The HI14142 HALO is an innovative pH electrode with Bluetooth® Smart technology designed for flat surfaces
Our HALO® Wireless pH Meter for Flat Surfaces has a flat tipped glass sensor and an open junction design to measure pH on flat surfaces or small volume samples. All readings are transmitted directly to your Apple or Android device or the edge®blu.
One Press Connect
Easily connect to the Hanna Lab App at the press of a button via Bluetooth wireless technology.
Status Indicator
Visible from a distance, the LED “halo” light flashes to indicate the status of the probe.
Easy-to-Replace battery
The HALOs CR2032 lithium ion battery is easily replaceable and lasts for approximately 500 hours.
Inquire Now
HI5124 pH 12.45 Technical Calibration Buffer (500 mL)
123.00 AED
HI5124 is a premium quality pH 12.45 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Supplied with Certificate of Analysis
- Accuracy of ±0.01 pH @ 25℃
- Temperature chart of the actual pH value at various temperatures printed on each bottle
Alkalinity Chemical Test Kit - HI3811
206.00 AED
The HI3811 is a chemical test kit that measures alkalinity by titration with hydrochloric acid. The HI3811 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with color indicator
Inquire Now
edge® Multiparameter EC/TDS/Salinity Meter - HI2030
2,682.00 AED
edge’s groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5” thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.
ORP Electrode for Process Control and Monitoring - HI2001
680.00 AED
HI2001 is an economical process ORP probe with a BNC connector. The BNC connector is universal and works with any ORP (mV) meter that has a BNC probe input. The HI2001 is a double junction design with a polymer reference for long life in many common industrial applications.
1/2" and 3/4" NPT threads for in-line and submersion mounting
Chemically resistant PTFE junction
Universal BNC connector
Inquire Now
Compact Magnetic Mini-Stirrer (Black) - HI180-1
306.00 AED
HI180 are a family of lightweight and inexpensive magnetic mini-stirrers. The stirrers are compact and easy to handle, requiring very little space. HI180 mini-stirrers are available in 11 colors, allowing easy recognition on crowded benchtops.
Lightweight design
Speedsafe™ mechanism
Adjustable speed control
Inquire Now
GroLine pH/EC/TDS Multiparameter Probe (Inline)
989.00 AED
The HI1285-9 inline multiparameter probe measures pH, EC/TDS, and temperature in one convenient, rugged probe. Use with the HI981421 GroLine Monitor to provide around-the-clock, continuous monitoring of pH, conductivity (EC & TDS), and temperature in hydroponic nutrient solutions.
- In-line pH, EC, & TDS probe with exclusive PTFE non-clogging membrane.
- Built-in temperature sensor ensures fast, accurately compensated readings even during sudden temperature fluctuations.
- Specialized for hydroponics with a renewable junction for extended life.
