Showing 37–48 of 2449 resultsSorted by popularity
GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
- 3 parameters, pH, EC/TDS and temperature, in one meter
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)
Checker® pH Tester with 0.1 pH Resolution - HI98103
The HI98103 Checker is the next generation of the original Hanna Checker pH tester. The Checker is the most popular pH meter in the world with over 1 million meters used since its introduction in 1991. From students to researchers, the Checker has been helping people with their pH measurement as a meter that is simple to use and operate.
- One-button operation
- Replaceable pH electrode
- ±0.2 pH accuracy
Total Chlorine Checker® Reagents (25 Tests) - HI711-25
The HI711-25 are the replacement reagents for the HI711 Total Chlorine Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
HI7034L 80000 µS/cm Conductivity Standard (500mL Bottle)
HI7034L is a premium quality 80, 000 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
HI7022L 470 mV @ 25°C ORP Test Solution (500 mL)
HI7022L is a quality ORP test solution made from reagent grade chemicals and used to test platinum and gold ORP electrodes. Hanna test solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Prepared with reagent grade chemicals
- Allows for a quick check of your ORP electrode
- Air tight bottle with tamper-proof seal to ensure quality
Copper High-Range Checker® HC
The Hanna Copper High-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits are not very accurate and only give 5 to 10 points resolution while professional instrumentation can cost hundreds of dollars and can be time-consuming to calibrate and maintain. The Checker® is both accurate and affordable.
Inquire Now481.00 AED Original price was: 481.00 AED.477.00 AEDCurrent price is: 477.00 AED.
Boron Chemical Test Kit for Irrigation Water - HI38074
The HI38074 is a chemical test kit that measures boron in irrigation water by titration with boric acid. The HI38074 is supplied complete with all of the reagents and equipment necessary to perform 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with electronic pH meter
pH/EC/TDS Multiparameter Probe for use with HI9814 - HI1285-7
The HI1285-7 is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two stainless steel pins for an amperometric determination of conductivity and total dissolved solids. A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. The design consideration for the HI1285-7 is ideal for measuring the pH, EC/TDS, and temperature in greenhouses, hydroponics, and other agricultural applications. The HI1285-7 is designed for use with Hanna’s HI9814 portable multiparameter meter.
- Pre-amplified pH Electrode
- Amperometric EC/TDS Sensor
- CAL Check Compatible
Hanna Wastewater Photometer & COD Heater Bundle – HI83314 + HI839800
Bundle includes the Hanna HI83314 multiparameter wastewater photometer and pH meter along with the HI839800 COD test tube heater — designed for accurate COD, Total Nitrogen, and Total Phosphorus testing in wastewater analysis. Ideal for labs, environmental monitoring, and treatment plants.
HI7632-00 Conductivity and TDS Probe
EC/TDS amperometric probe for BL 983317, BL 983318 and BL 983327 high-range mini controllers.
EC/TDS probe with quick connect DIN connector for HI99300/HI99301
The HI763063 is a two-ring probe for use with the HI9930) and HI99301 Portable EC Meters.
HI731336N Caps for Glass Cuvette Used with HI977 Series Portable Photometers (4 pcs)
The HI731336N are the replacement caps that screw on the glass cuvettes used with the HI977xx series portable photometers. Each cap has a locking indexing tab that ensures the cuvette is inserted into the photometer in the same position. The caps are also used to block any light that would interfere with the optically based measurement. The HI731336N includes 4 caps.
- Locking index tab for proper alignment in the photometer
- Light blocking to prevent stray light from entering
