0
0

Cart (0)

Home>All Products>Products>Thermometers>Thermometers - Portables>Pool Line Digital Thermometer – HI985394
Pool Line Digital Thermometer - HI985394
Sold out

Out of stock

Pool Line Digital Thermometer – HI985394

HI985394 Pool Line Digital Thermometer uses a weighted, stainless steel probe with a 3 m (9.9’) flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement at a variety of depths in swimming pools and hot tubs.

  • CAL Check™ to verify internal electronics of the meter
  • Selectable ℃/℉ readout
  • Weighted AISI 316 Stainless Steel Probe

306.00 AED

Inquire Now
SKU:HI985394

The Checktemp Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.

The weighted, stainless steel probe is designed to measure temperature in swimming pools and hot tubs. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel, which makes it easy to clean.

The HI985394 Pool Line Digital Thermometer is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The thermometer then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.

Features at-a-glance:

  • AISI 316 stainless steel weighted probe
  • ±0.3℃ (±0.5℉) Accuracy
  • CAL Check™ – Automatically verifies calibration at startup
  • ℃/℉ readout – User selectable
  • IP 65 water resistant protection
  • User-selectable auto-off (select from 8 min., 60 min., or disable)

Bestsellers

Quick view
Add to cart

HI7004L/C pH 4.01 Calibration Solution (500 mL)

89.00 AED
HI7004L/C is a premium quality pH 4.01 calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Add to cart
Quick view
Add to cart

HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)

61.00 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • 1, 382 mg/L (ppm) TDS calibration solution
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Add to cart
Quick view
Add to cart

HI7021L 240 mV @ 25°C ORP Test Solution (500 mL)

114.00 AED
HI7021L is a quality ORP test solution made from reagent grade chemicals and used to test platinum and gold ORP electrodes. Hanna test solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
  • Prepared with reagent grade chemicals
  • Allows for a quick check of your ORP electrode
  • Air tight bottle with tamper-proof seal to ensure quality
Add to cart
Quick view
Add to cart

Digital Glass Body pH Electrode for General Purpose - HI11310

638.00 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Built-In Microchip
  • Spherical Glass Tip
  • Double Junction Reference
  • 3.5 mm Connector
Add to cart
Quick view
Add to cart

COD Low Range Reagent Vials, EPA Method (25 tests) - HI93754A-25

250.00 AED
The HI93754A-25 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability
    • *This product is classified as Dangerous Goods and can only be shipped via ground. For Professional Use Only.
    Add to cart
    Quick view
    Add to cart

    HI7010/1L pH 10.01 Calibration Solution (1 L)

    77.00 AED
    HI7010/1L is a premium quality pH 10.01 calibration solution that has been dyed violet for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
    • Solution dyed violet for easy pH buffer value identification
    • Accuracy of ±0.01 pH @ 25℃
    • Temperature chart of the actual pH value at various temperatures printed on each bottle
    Add to cart
    Quick view
    Add to cart

    Refillable Double Junction pH Electrode with BNC Connector - HI1043B

    788.00 AED
    The HI1043B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the pH sensing portion is made with high temperature glass. This design consideration is ideal for hydrocarbons, paints, solvents, high conductivity samples, strong acids and bases, and for measuring samples at elevated temperatures.
    • Refillable Electrode
    • Double Junction Design
    • High Temperature Glass
    Add to cart
    Back to Top
    Whatsapp
    Product has been added to your cart
    Close