The HI991404 is a simple way to measure pH, TDS (0 to 2000 ppm) or EC (0 to 3999 µS/cm) and temperature. Installation is easy; simply hang the meter right above the sample to be tested for continuous measurement, plug the instrument to the mains, immerse the probes and the unit will run without interruption on 12 VDC power supply. The large, dual-display LCD screens show pH, TDS or EC and temperature readings simultaneously. Designed for use in greenhouses and horticultural applications, this meter is waterproof and protected against the ingress of dust and particles.
The meter is supplied with a HI1293D pre-amplified pH electrode with a PEI body and DIN connector. The amplifier for the pH electrode prevents interference from humidity and sources of electrical noise include circulating pumps, motors, and ballasts for grow lights. The polyethylenimine (PEI) protective body protects against most aggressive chemicals as seen in fertilizer solutions with high concentrations of phosphate and nitrate.
The fixed conductivity probe, HI7630 2-pin amperometric features a built-in temperature sensor, 2m (6.6’) cable and protective sleeve to resist most aggressive chemicals.Calibration and temperature compensation are automatic, while the EC/TDS conversion factor and temperature coefficient (β) are user adjustable for application specific measurements. Additionally, both the HI1293D pH electrode and HI7630 conductivity probe have been molded with pipe thread (1/2’’ NPT), which allows the user to attach them to an in-line system.
Features at a Glance
Large, dual-level LCD screen
- Easily see pH, TDS or EC and temperature readings even in low light
Automatic one-point or two-point calibration
- Automatically calibrate to 1 or 2 points with auto-buffer recognition
Automatic Temperature Compensation
- Samples automatically compensated for temperature variations
Adjustable TDS Factor
- TDS factor adjustable from 0.45 to 1.00 for application specific measurements
