Showing 109–120 of 158 results
PVDF Body Foodcare pH Electrode for Dairy Products and Semi-Solid Foods - FC200B
703.00 AED
The FC200B is a PVDF body, gel filled, single junction pH electrode with a BNC connector. This probe features an open junction design, a sensing bulb made of low temperature glass, and a food grade plastic body.
This design consideration is ideal for pH measurements in the food industry including dairy, dough, ground meats, and other semi-solid food samples. The recommended operating temperature range is from 0 to 50℃.
- Low Temperature Glass
- Open Junction
opdo™ Probe Replacement Cap Kit - HI764113-1
440.00 AED
The HI764113-1 is a replacement cap kit for use with HI764113 Optical Dissolved Oxygen Probe for the HI98198 Optical Dissolved Oxygen Meter.
- RFID tag is embedded into the Smart Cap sensor
- Stores factory calibration coefficients
- Monitor the time from the first use in order to alert when to replace
Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983327-1 | 115/230VAC
734.00 AED
The BL983327 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid valve to open and drain a tank (i.e. boiler bleed and feed) or add freshwater until the desired set point is reached.
The BL983317 is a closely related product that has the same measurement range but has a relay that is activated when the reading is below the set point.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
TDS Mini Controller (0.0 to 49.9 ppm) - BL983324-115/230VAC
734.00 AED
The BL983324 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.0 to 49.9 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The BL983324 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
*The BL983324 uses a 0.5 conversion factor in which 1.0 µS/cm = 0.5 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
ORP Mini Controller with Analog Output - BL932700-115/230VAC
965.00 AED
The BL932700 is a compact, ORP process controller designed for applications where space or cost is important. The device may be used with any ORP electrode with a standard BNC connector. It’s adjustable dosing relay may be configured to dose above or below a user programmable mV setpoint. Users may choose from automatic or manual dosing modes allowing for easy maintenance and troubleshooting.
Large Clear LCD
A large LCD clearly displays the parameter you are monitoring.
Fire Retardant Casing
Special materials provide additional protection in the event of an emergency.
BNC Connection
The controller features a BNC connector that allows any ORP probe with a BNC connector to be used.
GroLine Waterproof EC/TDS Tester - HI98318
263.00 AED
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
- Graphite Sensor for Reduced Polarization Effect
- Two-Button Operation
- Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
DiST 2 Waterproof High-Range TDS Tester - HI98302
217.00 AED
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
- Large Multi-level LCD
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
0 FNU Turbidity Calibration Solution (230 mL) - HI9829-16
422.00 AED
HI9829-16 is a premium quality 0 FNU Turbidity Calibration Solution for use with the for the calibration of HI7609829 Turbidity Sensor on the HI9829 portable multiparameter meter in water quality applications. Hanna calibration solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Solution is 0 formazin nephelometric units (FNU)
- Tamperproof seal
- Lot number and expiration date on each sachet
Digital Refractometer for Propylene Glycol Analysis - HI96832
869.00 AED
The HI96832 is a rugged, portable digital refractometer designed for the measurement of percent volume and freezing point of propylene glycol based solutions. The HI96832 has a high accuracy of ±0.2% volume and ±0.5 ℃ freezing point and features simple operation that gives reliable results each and every time. All readings are automatically compensated for temperature variations and displayed with a 1.5 second response time. The sealed flint glass prism and stainless steel well are easy to clean. Just wipe with a soft cloth in preparation for the next sample.
- Sample size as small as 2 metric drops (100 µl)
- Sealed stainless steel well with high-grade optical prism made of flint glass
- Fast 1.5 second response time for temperature compensated readings
Silica High Range Reagents (100 tests) - HI96770-01
713.00 AED
The HI96770-01 are reagents for the colorimetric determination of silica. There are enough reagents for 100 tests to be used with Hanna’s compatible portable photometer, HI96770. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
COD Ultra-High Range Reagent Vials, EPA Method (25 tests) - HI93754J-25
250.00 AED
The HI93754J-25 are reagent vials that follow the EPA approved method for the ultra-high range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high-quality reagents are clearly marked with the lot number and expiration date on each box for traceability.Bar coded vials Pre-dosed reagents for ease of use Marked with expiration date and lot number for traceability
*This product is classified as Dangerous Goods and can only be shipped via ground.
For Professional Use Only.
COD Medium Range Reagent Vials, ISO Method (25 tests) - HI93754G-25
250.00 AED
The HI93754G-25 are reagent vials that follow the ISO approved method for the medium range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.Pre-dosed reagents for ease of use Supplied with certificate of quality Marked with expiration date and lot number for traceability
*This product is classified as Dangerous Goods and can only be shipped via ground.
For Professional Use Only.
