Showing 121–132 of 173 resultsSorted by popularity
Sulfite Chemical Test Kit - HI3822
388.00 AED
The HI3822 is a chemical test kit that uses a titrimetric method to measure sulfite as sodium sulfite (Na2SO3). The HI3822 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with starch indicator
HI38061 Phosphate Test Kit
504.00 AED
The HI38061 is a chemical test kit that uses the ascorbic acid method to measure phosphate. The HI38061 is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Checker® disc for more accurate determination
pH Test Kit - HI38058
388.00 AED
The HI38058 is a chemical test kit that uses a colorimetric method to measure pH. The HI38058 is supplied complete with all of the reagents and equipment necessary to perform 300 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Checker® disc for more accurate determination
Gel Filled PEI Body pH Electrode with BNC Connector - HI1230B
422.00 AED
The HI1230B is a PEI body, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass and is protected by an extension of the durable PEI body.
This design consideration is ideal for field applications as well as general purpose use.
- Durable PEI Body
- Double Junction Reference
- Low Temperature (LT) Glass
Digital PVDF Body Foodcare pH Electrode for Dairy Products
788.00 AED
The FC2020 is a digital PVDF body, gel filled pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.The FC2020 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features an open junction design with viscolene gel electrolyte, a sensing bulb made of low temperature glass, and a conical tip shape. This design consideration is ideal for pH measurements in samples such as milk, yogurt, cheese, and other products in the dairy industry. The recommended operating temperature range is from 0 to 60℃.
PVDF Body Foodcare pH Electrode for Dairy Products and Semi-Solid Foods - FC200B
703.00 AED
The FC200B is a PVDF body, gel filled, single junction pH electrode with a BNC connector. This probe features an open junction design, a sensing bulb made of low temperature glass, and a food grade plastic body.
This design consideration is ideal for pH measurements in the food industry including dairy, dough, ground meats, and other semi-solid food samples. The recommended operating temperature range is from 0 to 50℃.
- Low Temperature Glass
- Open Junction
opdo™ Probe Replacement Cap Kit - HI764113-1
440.00 AED
The HI764113-1 is a replacement cap kit for use with HI764113 Optical Dissolved Oxygen Probe for the HI98198 Optical Dissolved Oxygen Meter.
- RFID tag is embedded into the Smart Cap sensor
- Stores factory calibration coefficients
- Monitor the time from the first use in order to alert when to replace
Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983327-1 | 115/230VAC
734.00 AED
The BL983327 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid valve to open and drain a tank (i.e. boiler bleed and feed) or add freshwater until the desired set point is reached.
The BL983317 is a closely related product that has the same measurement range but has a relay that is activated when the reading is below the set point.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
TDS Mini Controller (0.0 to 49.9 ppm) - BL983324-115/230VAC
734.00 AED
The BL983324 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.0 to 49.9 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The BL983324 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
*The BL983324 uses a 0.5 conversion factor in which 1.0 µS/cm = 0.5 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
ORP Mini Controller with Analog Output - BL932700-115/230VAC
965.00 AED
The BL932700 is a compact, ORP process controller designed for applications where space or cost is important. The device may be used with any ORP electrode with a standard BNC connector. It’s adjustable dosing relay may be configured to dose above or below a user programmable mV setpoint. Users may choose from automatic or manual dosing modes allowing for easy maintenance and troubleshooting.
Large Clear LCD
A large LCD clearly displays the parameter you are monitoring.
Fire Retardant Casing
Special materials provide additional protection in the event of an emergency.
BNC Connection
The controller features a BNC connector that allows any ORP probe with a BNC connector to be used.
GroLine Waterproof EC/TDS Tester - HI98318
263.00 AED
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
- Graphite Sensor for Reduced Polarization Effect
- Two-Button Operation
- Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
DiST 2 Waterproof High-Range TDS Tester - HI98302
217.00 AED
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
- Large Multi-level LCD
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
