Showing 337–348 of 349 results
Ammonia Combination Ion-Selective Electrode (ISE) - HI4101
2,721.00 AED
The HI4101 is a gas sensing, combination ion selective electrode (ISE) for the determination of ammonia (NH3) in solution. Its PTFE membrane allows for ammonia gas diffusion into a thin layer of internal electrolyte. The internal sensing elements are within a durable Delrin® body.The HI4101 is ideal for a variety of applications including water, wastewater, agricultural, and wine applications.
- Replaceable PTFE membranes
- Durable Delrin® body
- Detection from 0.02 to 17, 000 mg/L NH3
Interferent Suppressant ISA (ISISA) for Nitrate ISEs - HI4013-06
344.00 AED
HI4013-06 is a 500 mL bottle of nitrate interferent suppressant ISA solution for use with nitrate ion selective electrodes.Hanna ISA solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Required for nitrate measurements with interfering ions
- Air tight bottle with tamper-proof seal
- Clearly marked lot number and expiration date
Nitrate ISE 1000 ppm Standard - HI4013-03
298.00 AED
HI4013-03 is a 500 mL bottle of premium quality 1000 ppm (mg/L) nitrate standard solution (as NO3-N).Hanna ISE standards have the lot number and expiration date clearly marked on the label. Bottles are air tight with a tamper-proof seal to ensure the quality of the standard solution. Hanna’s line of standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 1000 ppm (mg/L) nitrate standard
- Air tight bottle with tamper-proof seal
- Lot number and expiration date printed on each label
Nitrate ISE 100 ppm Standard - HI4013-02
298.00 AED
HI4013-02 is a 500 mL bottle of premium quality 100 ppm (mg/L) nitrate standard solution (as NO3-N).Hanna ISE standards have the lot number and expiration date clearly marked on the label. Bottles are air tight with a tamper-proof seal to ensure the quality of the standard solution. Hanna’s line of standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- 100 ppm (mg/L) nitrate standard
- Air tight bottle with tamper-proof seal
- Lot number and expiration date printed on each label
Chloride Chemical Test Kit - HI3815
201.00 AED
The HI3815 is a chemical test kit that measures chloride by titration with mercuric nitrate. The HI3815 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Manual titration performed with diphenylcarbazone indicator
Silica Chemical Test Kit - HI38067
553.00 AED
The HI38067 is a chemical test kit that uses the heteropoly blue method to measure silica. The HI38067 is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.
- Pre-made reagents for ease of use
- All reagents marked with expiration date and lot number for traceability
- Checker® disc for more accurate determination
Total Hardness Test Kit Replacement Reagents (100 tests) - HI38033-100
62.00 AED
The HI38033-100 are reagents for the determination of total hardness (as CaCO3) by titration with the HI38033 Total Hardness Chemical Test Kit. There are enough reagents for approximately 100 tests to be used with Hanna’s test kit. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
Refillable Combination ORP Electrode with BNC Connector - HI3131B
833.00 AED
The HI3131B is a glass body, refillable, single junction ORP electrode with a BNC connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin.This design consideration is ideal for laboratories and general purpose ORP measurements, as well as for use as an indicating electrode in ORP titrations.Refillable ElectrodeSingle Ceramic JunctionPlatinum Pin
Flat Tip pH Electrode for Skin and Surfaces with BNC Connector - HI1413B
618.00 AED
The HI1413B is a glass body, single reference junction pH electrode made with low temperature glass and a BNC connector. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe's flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper.
Open Junction
Flat Tip
Viscolene Gel Electrolyte
pH Electrode with CPS™ (Clogging Prevention System) for Non-aqueous Titrations - HI1049B
1,085.00 AED
The HI1049B is a glass body, refillable, sleeve junction pH electrode with a BNC connector. This electrode features a double junction reference, Hanna’s Clogging Prevention System (CPS) technology and spherical glass sensing bulb made with general purpose glass. It’s compatible with all electrode filling solutions, including non-aqueous.
- Clogging Prevention System (CPS™) Technology
- Refillable Electrode
- Double Junction Design
pH Electrode for Process Control and Monitoring - HI1001
618.00 AED
The HI1001 is a flow-thru monitoring pH electrode with BNC connection and 3 m cable that has been specifically built for industrial applications. This durable electrode is composed of a PVDF body with a protective PEI sleeve around the glass bulb for resistance against mechanical stress. This sensor provides a rapid response and high accuracy pH measurements for industrial applications.
- 1/2" NPT threads for in-line mounting
- PTFE junction
- BNC universal connector
Ammonia Low-Range Checker® HC - HI700
237.00 AED
The Hanna Ammonia Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Ammonia Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation