Showing 361–372 of 472 resultsSorted by popularity
Checktemp® 1 Digital Thermometer - HI98509
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
- CAL Check™
- ℃/℉ readout
Inquire Now
Marine Salinity Waterproof Tester - HI98319
HI98319 is a digital salinity tester designed specifically for saltwater aquariums that displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water.
- Exposed Temperature Probe for Fast Response
- Measures salinity up to 70.00 ppt
- Waterproof and designed to float
GroLine Waterproof EC/TDS Tester - HI98318
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
- Graphite Sensor for Reduced Polarization Effect
- Two-Button Operation
- Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
- Waterproof
- Exposed temperature probe for fast response
- High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
DiST 2 Waterproof High-Range TDS Tester - HI98302
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
- Large Multi-level LCD
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
0 FNU Turbidity Calibration Solution (230 mL) - HI9829-16
HI9829-16 is a premium quality 0 FNU Turbidity Calibration Solution for use with the for the calibration of HI7609829 Turbidity Sensor on the HI9829 portable multiparameter meter in water quality applications. Hanna calibration solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Solution is 0 formazin nephelometric units (FNU)
- Tamperproof seal
- Lot number and expiration date on each sachet
10 ppm and 100 ppm Ammonium Calibration Standard Sachets for HI9829 (10 x 20 mL each) - HI9829-10/11
HI9829-10/11 is for premium quality 10 ppm and 100 ppm (mg/L) Ammonium (as N) calibration standards. These standards are used to calibrate the HI7609829-10 ammonium ISE. Each sachet has the lot number and expiration date stamped on it. The sachet is made of light block and air-tight foil ensuring freshness each time one is used. The HI9829-10/11 contains 10 sachets, each of the 10 ppm and 100 ppm Ammonium Calibration Standard (as N). Each sachet contains approximately 20 mL of buffer.
- Pre-mixed to exact standard value
- pH and ionic strength stabilized
- Lot number and expiration date on each sachet
Quick Calibration Solution (500mL Bottle) - HI9828-25
HI9828-25 is a quick calibration solution for use with Hanna’s family of portable multiparameter meters. It provides for a single point of calibration for pH and conductivity and is ideal for field use.
- Single, Field Ready Calibration
- Leak Proof Portable Solution
Waterproof pHep®5 pH/Temperature Tester - HI98128
Hanna's pHep®5 is an advanced, ergonomic, waterproof pH and temperature tester, with 0.01 resolution, that measures from -2.0 to 16.0 pH pH and accuracy of ±0.05 pH. pHep5 features automatic one or two-point calibration to known buffer and automatic temperature compensation.
- Waterproof
- Replaceable pH Electrode
- Automatic up to Three-Point pH Calibration
Foodcare Meat pH Tester - HI981036
The HI981036 Meat pH Tester has been carefully designed to take direct pH measurements during meat processing. The built-in probe features an open reference junction, conical glass tip, and a removable sleeve design, making it ideal for measuring the pH of meat.
- 0.01 resolution with ±0.05 pH accuracy
- Specialized electrode for spot checking the pH during meat processing
- Comes with everything necessary to start measuring right away
Digital Refractometer for Propylene Glycol Analysis - HI96832
The HI96832 is a rugged, portable digital refractometer designed for the measurement of percent volume and freezing point of propylene glycol based solutions. The HI96832 has a high accuracy of ±0.2% volume and ±0.5 ℃ freezing point and features simple operation that gives reliable results each and every time. All readings are automatically compensated for temperature variations and displayed with a 1.5 second response time. The sealed flint glass prism and stainless steel well are easy to clean. Just wipe with a soft cloth in preparation for the next sample.
- Sample size as small as 2 metric drops (100 µl)
- Sealed stainless steel well with high-grade optical prism made of flint glass
- Fast 1.5 second response time for temperature compensated readings
Digital Refractometer for Refractive Index and Brix - HI96800
Hanna’s new HI96800 Digital Refractometer measures Refractive Index and displays results in both temperature compensated (nD20) and non-temperature compensated (nD) formats on the dual-level LCD screen. The HI96800’s intuitive layout and pinpoint accuracy ensures effortless operation and reliable readings every time.Refractive Index is measured to determine a liquid’s composition and assess its concentration and density. It is used by many industries including pharmaceutical, food and environmental, as an important indicator of quality and consistency. The HI96800 also converts Refractive Index to % Brix with the push of a single button.
- Sample size as small as 2 metric drops (100 µl)
- Sealed stainless steel well with high-grade optical prism made of flint glass
- Fast 1.5 second response time for temperature compensated readings
