Continue shopping “HI7007/1L pH 7.01 Calibration Solution (1 L)” has been added to your cart.
Continue shopping “HI7004/1L pH 4.01 Calibration Solution (1 L)” has been added to your cart.
Showing 289–300 of 344 results
10m (32.8')
1,687.00 AED
This galvanic dissolved oxygen probe is designed to work with the HI8410 to monitor the concentration of DO in a wide range of industrial process applications.
- Galvanic technology eliminates noise and instability.
- Built-in temperature sensor for Automatic Temperature Compensation.
- Built for everyday, demanding use in industrial applications.
Spare Dissolved Oxygen Screw Cap Membranes For Galvanic Sensors - HI76409A/P
275.00 AED
The HI76409A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s portable galvanic dissolved oxygen probes and sensors. The caps are constructed of durable ABS plastic with high density polyethylene (HDPE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
- Screw Cap Design
- Pre-tensioned Membranes
Spare Dissolved Oxygen Screw Cap Membranes - HI76407A/P
286.00 AED
The HI76407A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s portable polarographic dissolved oxygen probes. The caps are constructed of durable ABS plastic with polytetrafluoroethylene (PTFE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
- Pre-tensioned PTFE Membranes
- Screw Cap Design
HI76407 Polarographic Dissolved Oxygen Probe with 4 meter cable
850.00 AED
The HI76407/F is a standard polarographic dissolved oxygen probe for Hanna’s benchtop and portable dissolved oxygen meters. It contains a platinum cathode and silver anode and is for use with HI76407A/P PTFE membrane caps. It’s protective sleeve makes it ideal for use in rugged or demanding environments.
Polarographic Sensor
Protective Sleeve
Integrated Temperature Sensor
2m (6.56')
209.00 AED
The HI7634-00 is a two-pole amperometric EC/TDS probe for panel mounted mini controllers that measure in the low range (µS/cm and ppm). This probe has a built-in temperature sensor for Automatic Temperature Compensation and a ½ " male NPT threaded connection for insertion mounting. The HI7634-00 probe provides a rapid response and high accuracy EC or TDS measurement.
- Two-pole amperometric probe
- Internal temperature sensor
- Low range measurement (µS/cm and ppm)
Dual Platinum Pin Electrode for HI903 - HI76320
1,475.00 AED
The HI76320 is a glass bodied, dual platinum pin electrode for use with the HI903 Karl Fischer titration system. Each sensor is designed for sensitive, precise, and accurate detection.
- Glass Body
- Dual Platinum Pin
- BNC Connection
HI763100 - Digital EC/Temperature Electrode
1,551.00 AED
The HI 763100 is a digital conductivity electrode with a built-in temperature sensor. Compared to the amperometric design of other conductivity probes, the HI 763100 is potentiometric probe with platinum sensors which allows for the possibility to measure high or low conductivity ranges using one probe. This electrode features an integrated microchip which stores calibration data, electrode type, and serial number. The HI 763100 is designed for use with Hanna’s edge® pH/EC/DO meter.
- Digital Probe with Built-in Microchip
- Internal Temperature Sensor
- 3.5 mm Connector
Inquire Now
Marine Calcium Checker® HC Reagents (25 Tests) - HI758-26
The HI758-26 are the replacement reagents for the HI758 Marine Calcium Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Inquire Now
Marine Calcium Checker® HC Calibration Check Set - HI758-11
The Marine Calcium Checker® HC Calibration Check Set - HI758-11 provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker®HC.
- Supplied with Certificate of Analysis
- Standard value of 400 ±20 ppm calcium @ 25℃
- Reusable with long shelf life stability
Marine Alkalinity Checker® HC - HI755
205.00 AED
The Hanna Marine Alkalinity Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Marine Alkalinity Checker® measures alkalinity in parts per million (ppm) of calcium carbonate (CaCO3) , using a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Lab Safety Shield - HI740217
313.00 AED
The HI740217 is a lab safety shield recommended for use with the HI839800 COD Test Tube Heater.
- Full protective coverage
- Custom fit for HI839800
- Supports laboratory safety measures
Plastic Beaker Set, 100 mL (10) - HI740036P
74.00 AED
HI740036P is a set of plastic beakers that are supplied with some of the Hanna test kits, photometers, and meters. Each set comes with 10 beakers that have graduated markings and are used for measuring (up to 100 mL) or for sample analysis.
- Durable plastic
- Graduated volume markings
- 10 piece set
