Showing 229–240 of 344 results
Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983327-1 | 115/230VAC
734.00 AED
The BL983327 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid valve to open and drain a tank (i.e. boiler bleed and feed) or add freshwater until the desired set point is reached.
The BL983317 is a closely related product that has the same measurement range but has a relay that is activated when the reading is below the set point.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
TDS Mini Controller (0.0 to 49.9 ppm) - BL983324-115/230VAC
734.00 AED
The BL983324 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.0 to 49.9 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The BL983324 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
*The BL983324 uses a 0.5 conversion factor in which 1.0 µS/cm = 0.5 ppm.
Multicolor LED Indicator
LED changes color based on status.
Fire Retardant Casing
For additional safety the controllers outer case is made of fire resistant plastic.
Splash Resistant Cover
A clear plastic cover protects the face panel from dirt and liquids.
ORP Mini Controller with Analog Output - BL932700-115/230VAC
965.00 AED
The BL932700 is a compact, ORP process controller designed for applications where space or cost is important. The device may be used with any ORP electrode with a standard BNC connector. It’s adjustable dosing relay may be configured to dose above or below a user programmable mV setpoint. Users may choose from automatic or manual dosing modes allowing for easy maintenance and troubleshooting.
Large Clear LCD
A large LCD clearly displays the parameter you are monitoring.
Fire Retardant Casing
Special materials provide additional protection in the event of an emergency.
BNC Connection
The controller features a BNC connector that allows any ORP probe with a BNC connector to be used.
Portable Waterproof pH/EC/TDS Meter (High Range) - HI991301
1,988.00 AED
The HI991301 is designed to measure pH, conductivity (EC), total dissolved solids (TDS), and temperature with a single probe. From setup to calibration all operations are performed with just two buttons. The meter is waterproof and rated for IP 67 conditions.The HI12883 pre-amplified multiparameter probe features an easy-to-clean sensor and a cloth junction that can be renewed to increase the life of the probe. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the HI12883.User-selectable features include different TDS factors from 0.45 to 1.00 and a range of temperature coefficients (β) from 0.0 to 2.4% for greater consistency and reproducibility. Standardized buffer recognition values are also selectable.These instruments easily fit in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in your way. The large, multi-level LCD displays the primary reading, temperature, and calibration guides simultaneously.
Portable Waterproof pH/EC/TDS Meter (Low Range) - HI991300
1,988.00 AED
The HI991300 is a slim, lightweight, and waterproof portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with a single amplified probe. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI991300 has advanced features including a selectable EC to TDS conversion factor (0.45 - 450 ppm and 1.0 - 1000 ppm).
- 3 in 1 amplified probe with pH, EC/TDS and temperature sensors
- Quick Cal Mode to calibrate pH and EC/TDS with one solution
- EC to TDS Conversion factor selectable between 0.45 and 1.0
Turbidity Calibration Standards for HI98713 - HI98713-11
The HI98713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.1, 15, 100, and 750 FNU
- Reusable with long shelf life stability
Checktemp® 1 Digital Thermometer - HI98509
171.00 AED
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
- CAL Check™
- ℃/℉ readout
Checktemp® Digital Thermometer - HI98501
163.00 AED
The HI98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
- CAL Check™
- ℃/℉ readout
Inquire Now
Marine Salinity Waterproof Tester - HI98319
HI98319 is a digital salinity tester designed specifically for saltwater aquariums that displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water.
- Exposed Temperature Probe for Fast Response
- Measures salinity up to 70.00 ppt
- Waterproof and designed to float
GroLine Waterproof EC/TDS Tester - HI98318
263.00 AED
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
- Graphite Sensor for Reduced Polarization Effect
- Two-Button Operation
- Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312
437.00 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
- Waterproof
- Exposed temperature probe for fast response
- High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
DiST 2 Waterproof High-Range TDS Tester - HI98302
217.00 AED
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
- Large Multi-level LCD
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
