Showing 133–144 of 340 resultsSorted by popularity
Ultra Pure Water (UPW) Tester (0.000-1.999 µS/cm) - HI98309
279.00 AED
The HI98309 UPW is the first pure water tester/conductivity meter to measure in 1/1000ths of micro-Siemens and provides on-the-spot and fast checks for minute traces of contamination in your water, assuring high quality of finished products in processes. A rugged, pocket-sized tester that features graphite electrodes to reduce polarization effects. The HI98309 comes already calibrated, done with freshly prepared low-conductivity solutions in factory due to the high instability of calibration solutions in the UPW range (below 2 µS/cm).Exposed temperature sensor for fast response Accurate readings of ultra low range 0.000 to 1.999 µS/cm Factory calibrated
HI70038P 6.44 g/L (ppt) TDS Calibration Solution (25 x 20mL)
121.00 AED
HI70038P is a premium quality 6.44 g/L (ppt) TDS calibration solution that is NIST traceable and contained in portable single-use sachets.. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70038P is for 25 sachets containing 20 mL of solution.
- 6.44 g/L (ppt) TDS value
- Temperature chart of the actual ppt value at various temperatures printed on each sachet
- Convenient packaging for one time use
HI70038C 6.44 g/L (ppt) TDS Calibration Solution (25 x 20mL)
144.00 AED
HI70038C is a premium quality 6.44 g/L (ppt) TDS calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70038C is for 25 sachets containing 20 mL of solution.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Convenient packaging for one time use
HI70030C 12880 µS/cm Conductivity Standard (25 x 20mL)
144.00 AED
HI70030C is a premium quality 12, 880 µS/cm conductivity solution that is NIST traceable and supplied with a Certificate of Analysis. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of conductivity solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70030C is for 25 sachets containing 20 mL of solution.
- Supplied with Certificate of Analysis
- Temperature chart of the actual µS/cm value at various temperatures printed on each sachet
- Convenient packaging for one time use
edge Dissolved Oxygen Spare Screw Cap Membranes - HI764080A/P
286.00 AED
The HI764080A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s edge HI764080 polarographic dissolved oxygen probes. The caps are constructed of durable ABS plastic with polytetrafluoroethylene (PTFE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
- Screw Cap Design
- Pre-Tensioned PTFE Membranes
® Compatible Digital DO/Temperature Electrode - HI764080
1,551.00 AED
The HI 764080 is a digital dissolved oxygen electrode with built-in temperature sensor. This ultra-thin, Clark-type polarographic electrode is designed for measuring DO in aqueous solutions and contains a built-in microchip that stores sensor type, serial number, and calibration information. The sensor features a platinum cathode with a silver/silver chloride anode, an integrated temperature sensor, and easily replaceable PTFE membrane caps. The HI 764080 is designed for use with Hanna’s edge® pH/EC/DO meter.
- Digital Probe
- Ultra-Thin Body
- Integrated Temperature Sensor
- 3.5mm Connector
Four-ring EC/TDS Probe with Internal Temperature Sensor – HI76312
1,729.00 AED
The HI76312 is a four-ring interchangeable platinum probe with built-in temperature sensor and 1 m (3.3’) cable.
- Replacement EC/TDS probe for HI5321, HI5521, and HI5522
- Can be used over a wide range of measurements
- Operating temperature range -5 to 100℃ (23 to 212℉)
Conductivity and Turbidity Sensor for the HI9829 Multiparameter Portable Meter - HI7609829-4
2,690.00 AED
The HI7609829-4 is a combined conductivity and turbidity sensor for use with Hanna’s HI9829 Multiparameter Portable Meter. The sensor body is constructed of durable ABS and epoxy material. The 4-ring conductivity sensor contains AISI 316 stainless steel electrodes that are not subject to polarization or surface coating effects. By design, turbidity measurements conform to ISO 7027 standards using an optical technique to measure suspended particles in water.
- Durable Sensor Body
- 4-Ring Stainless Steel Electrodes
- ISO 7027 Turbidity Sensor
Galvanic DO Sensor for HI9829 Multiparameter Portable Meter - HI7609829-2
807.00 AED
The HI7609829-2 is a galvanic dissolved oxygen membrane sensor for use with Hanna’s HI9829 Multiparameter Portable Meter. The sensor body is constructed of durable ABS material and contains an easily replaceable membrane cap design. The membranes are constructed of HDPE and each cap easily screws onto the sensor. The HI7609829-2 sensor contains a silver cathode and zinc anode. The sensor module is color coded for easy installation and integration with the probe.
- Easily Replaceable Membrane Caps
- Galvanic Design
- Color Coded Sensor
Nitrate Ion Selective Electrode for HI9829 Multiparameter Portable Meter - HI7609829-12
1,599.00 AED
The HI7609829-12 is a combination liquid membrane selective sensor used for the detection of nitrate-nitrogen in freshwater samples. Its double junction design contains an Ag/AgCl, gel filled reference chamber. The HI7609829-12 utilizes a polymeric membrane constructed in a PVC head. This sensor is used in the pH sensor socket of the probe.
- PEI Sensor Body
- Polymer Membrane
- Color Coded Sensor
Chloride Ion Selective Electrode for HI9829 Multiparameter Portable Meter - HI7609829-11
1,599.00 AED
The HI7609829-11 is a combination solid state chloride selective sensor used for the detection of free chloride ions in freshwater samples. Its double junction design contains an Ag/AgCl, gel filled reference chamber. The HI7609829-11 utilizes a silver chloride pellet constructed in a PEI head. This sensor is used in the pH sensor socket of the probe.
- PEI Sensor Body
- Polymer Membrane
- Color Coded Sensor
Ammonium Ion Selective Electrode for HI9829 Multiparameter Portable Meter - HI7609829-10
1,599.00 AED
The HI7609829-10 is a combination liquid membrane selective sensor used for the detection of free ammonium-nitrogen in freshwater samples. Its double junction design contains a Ag/AgCl, gel filled reference chamber. The HI7609829-10 utilizes a polymeric membrane constructed in a PVC head. This sensor is used in the pH sensor socket of the probe.
- PEI Sensor Body
- Polymer Membrane
- Color Coded Sensor
