Bestsellers in Iron
Inquire Now
Iron Low Range Reagents (150 tests) - HI93746-03
700.00 AED
The HI93746-03 are reagents for the colorimetric determination of low range iron. There are enough reagents for 150 tests to be used with a compatible benchtop or portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-dosed reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Inquire Now
Iron and Manganese Low-Range Portable Photometer with CAL Check - HI97742
HI97742 is an advanced portable photometer for the measurement of low levels of iron and manganese in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable measurements.
- No warm up time before taking a measurement
- Tutorial mode for step-by-step instructions
- CAL Check to verify meter performance
Lab Safety Shield - HI740217
313.00 AED
The HI740217 is a lab safety shield recommended for use with the HI839800 COD Test Tube Heater.
- Full protective coverage
- Custom fit for HI839800
- Supports laboratory safety measures
Inquire Now
Iron High Range CAL Check Standards - HI96721-11
713.00 AED
The HI96721-11 Iron High Range CAL Check Standards provides a simple solution to calibrating and validating the HI96721 iron photometer. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values and expiration date for traceability when certifying the HI96721.
- Supplied with Certificate of Analysis
- Standard value of 1.50 ±0.01 mg/L (ppm) iron @ 25℃
- Reusable with long shelf life stability
Inquire Now
Microfiber Cloth for Wiping Cuvettes (4) - HI731318
62.00 AED
HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints from the vials so that the glass is clean for the unimpeded transmission of light.
- Lint free
- Will not scratch glass cuvettes
Iron High Range Reagents (300 tests) - HI93721-03
263.00 AED
The HI93721-03 are reagents for the colorimetric determination of iron. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Inquire Now
Total Hardness and Iron Low-Range Portable Photometer with CAL Check – HI97741
HI97741 is an advanced portable photometer for the measurement of total hardness and iron in water. This meter offers a superior optical system that utilizes a reference detector and narrow band interference filters for extremely fast and repeatable measurements.
- No warm up time before taking a measurement
- Tutorial mode for step-by-step instructions
- CAL Check to verify meter performance
Showing 1–12 of 17 resultsSorted by popularity
Inquire Now
iris Visible Spectrophotometer - HI801 (230V)
The HI801 iris is a sleek and intuitive spectrophotometer that allows for measurement of all wavelengths of visible light.Customize your methods, take a wide range of measurements, and feel confident in your testing accuracy with iris.
- iris features precise wavelength selection between 340 nm to 900 nm for complete method compliance and accuracy that is necessary in industries like professional laboratories, water treatment facilities, wineries, and more.
- Results are consistent and accurate regardless of throughput with the high quality and uniquely designed optics system.
- Customization options include multiple cuvette shapes and sizes, custom calibration curves, and methods.
Multiparameter Benchtop Photometer and pH meter - HI83300 (230V)
4,268.00 AED
HI83300 is a compact, multiparameter photometer for use in the lab or in the field. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 60 different programmed methods measuring 37 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves.To save valuable laboratory benchtop space, the HI83300 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterAbsorbance measuring modeAllows performance verification using CAL Check standards
Water Conditioning Photometer - HI83308 (230V)
2,358.00 AED
HI83308 is a compact, multiparameter photometer for use in water conditioning applications. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 23 different programmed methods measuring 15 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Water conditioning parameters include fluoride, chlorine, ammonia, manganese, copper, iron, silver and zinc.To save valuable laboratory benchtop space, the HI83308 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterAbsorbance measuring mode
Water & Wastewater Multiparameter (with COD) Photometer and pH meter - HI83399 (230V)
5,243.00 AED
HI83399 is a compact, multiparameter photometer for measuring key water and wastewater quality parameters. The meter is one of the most advanced photometers available with a innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. 40 key water and wastewater quality parameters with 73 different methods covering multiple ranges are programmed into the meter. Wastewater treatment digestion parameters include COD, Total Nitrogen and Total Phosphorous which are important for monitoring nutrient removal. The HI83399 also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves.To save valuable laboratory benchtop space, the HI83399 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.Advanced optical systemUnparalleled performance from a benchtop photometerDigital pH electrode inputSave valuable bench space with one meter that works both as a photometer and as a laboratory pH meterWater and Wastewater Treatment Digestion ParametersAllows measurement of COD, Total Nitrogen and Total Phosphorus
COD Test Tube Heater - HI839800 (230V)
4,600.00 AED
The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150℃ and 105℃. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display.
- Low and high temperature alerts
- Built-in countdown timer
- Status indicator lights
Iron High Range Reagents (100 tests) - HI93721-01
94.00 AED
The HI93721-01 are reagents for the colorimetric determination of iron. There are enough reagents for 100 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-dosed reagents for ease of use
- Supplied with certificate of quality
- Marked with expiration date and lot number for traceability
Iron High Range Reagents (300 tests) - HI93721-03
263.00 AED
The HI93721-03 are reagents for the colorimetric determination of iron. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Iron II and III Reagent Set (100 tests) – HI96777-01
109.00 AED
The HI96777-01 are reagents for the colorimetric determination of Iron II and III. There are enough reagents for 100 tests to be used with Hanna’s compatible photometers. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number
Iron Checker® Reagents (25 Tests) - HI721-25
32.00 AED
The HI721-25 are the replacement reagents for the HI721 Iron Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Iron Checker® HC Calibration Check Set - HI721-11
51.00 AED
The Iron Checker® HC Calibration Check Set - HI721-11 provides a simple solution to validating the Iron Checker® HC - HI721 that has a range of 0.00 to 5.00 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 1.00 ±0.06 ppm iron @ 25℃
- Reusable with long shelf life stability
Iron Checker® HC - HI721
205.00 AED
The Hanna Iron Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Iron Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Iron (Medium Range) Test Kit Replacement Reagents (50 tests) - HI3834-050
44.00 AED
The HI3834-050 are replacement reagents for the colorimetric determination of iron with the HI3834 Iron Medium Range Test Kit. There are enough reagents for approximately 50 tests to be used with Hanna’s test kit. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
