Showing 61–72 of 148 resultsSorted by popularity
Multiparameter pH/ORP/DO/Pressure/Temperature Waterproof Meter - HI98196
The HI98196 is a waterproof portable logging multiparameter meter that monitors up to 7 different water quality parameters including 5 measured and 2 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The use of digital communication allows for noise free transfer of data for up to 100 meters in cable length. The complete system is simple to setup and easy to use.
- Multi-Parameter Display
- Multi-sensor Probe
- USB Connection
Ultra Pure Water EC/Resistivity Waterproof Portable Meter - HI98197
The HI98197 is a rugged portable EC/TDS/Resistivity/Salinity meter with the performance and features of a benchtop. The HI98197 is supplied complete with all accessories necessary to perform high purity water measurements packaged into a durable carrying case. The accessories include a stainless steel flow cell and a threaded four ring conductivity probe that allows for high resolution 0.001 µS/cm for conductivity and 0.1 Mω * cm for resistivity readings.
- Stainless steel flow cell
- Four ring conductivity/resistivity probe
- 0.001 µS/cm resolution
opdo Waterproof Optical Dissolved Oxygen Meter - HI98198
HI98198 portable Optical DO (opdo) meter uses a luminescent optical method for the measurement of dissolved oxygen in water and wastewater. This professional, waterproof meter complies with IP67 standards and measures DO, barometric pressure, BOD and temperature. The HI98198 is supplied complete with all accessories including probe, smartcap sensor with built in RFID, and a rugged carrying case. HI98198 Dissolved Oxygen Meter has many advanatages over other Galvanic and Polarographic Dissoved Oxygen Meters. This meter uses HI764113 Rugged Optical Dissolved Oxygen Probe for Dissolved Oxygen measurement which has following benefits.
- No membranes or electrolyte
- No flow dependence or minimum flow rate
- Fast and stable readings
- Minimal maintenance
HI7030/1G 12880 µS/cm Conductivity Standard (1 Gallon)
257.00 AED
HI7030/1G is a premium quality 12, 880 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
4-Ring Conductivity Probe, DIN Connector – HI76302W
HI76302W is a four-ring conductivity probe with internal temperature sensor, DIN connector and 1 m (3.3') cable.
4-Ring Conductivity Probe - HI76301
This four-ring conductivity probe offers a versatile and accurate solution for TDS readings. A 4-ring electrode design allow for reduced polarization and surface coating effects over an extended linear range of measurement. The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors and a 1m (3.3”) cable for accessing samples.
- Four-ring probe reduces polarization
- PVC body for increased durability
- DIN connector
Phosphorus Ultra Low-Range Checker® HC Reagents (25 Tests) - HI736-25
41.00 AED
The HI736-25 are the replacement reagents for the HI736 Phosphorus Ultra Low-Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
Phosphorus Ultra Low-Range Checker® HC Calibration Check Set - HI736-11
The Phosphorus Ultra Low-Range Checker® HC Calibration Check Set - HI736-11 provides a simple solution to validating the Phosphorus Ultra Low-Range Checker® HC - HI736 that has a range of 0 to 200 ppb as phosphorus. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 100 ±10 ppb phosphorus @ 25℃
- Reusable with long shelf life stability
Marine Phosphorus Ultra Low-Range Checker® HC - HI736
The Hanna Phosphorus Ultra Low-Range (0 to 200 ppb) Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Phosphorus Ultra Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Reagents for 25 Total Hardness Low Range tests - HI735-25
Get your replacement reagents for your Total Hardness Low Range Checker - Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use.
- Prepared with high purity chemicals.
- Marked with expiration date and lot number for traceability
Total Hardness Low Range Certified Standard Kit - HI735-11
The Total Hardness Low Range Checker® HC Calibration Check Set - HI735-11 provides a simple solution to validating the Total Hardness Low Range Checker® HC - HI735. This high-quality set of standards comes supplied with a Certificate of Analysis with the lot number, reference values, and expiration date for traceability when certifying the Checker®HC.
- Supplied with Certificate of Analysis
- Reusable with long shelf life stability
Total Hardness LR Checker HC Handheld Colorimeter
The HI735 Total Hardness Low Range handheld checker is designed to determine total hardness (as CaCO3) in drinking and process water, heating and cooling systems, swimming pools and spas. Also suitable to be used in agriculture, food and beverage industries. HI735 features a single-button operation system and is easy to use. The large LCD is easy to read and the auto shut-off feature assures the battery will not be drained.
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
