0
0

Cart (0)

Home>All Products>Products>Reagents>Reagents - Photometer Reagents>Total Hardness Low Range Colorimetric Reagents (100 tests) – HI93735-00
hi93735 00

In stock

Total Hardness Low Range Colorimetric Reagents (100 tests) – HI93735-00

The HI93735-00 are reagents for the low range colorimetric determination of total hardness. There are enough reagents for 100 tests to be used with Hanna’s HI96735 Total Hardness EPA Portable Photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle and packet for traceability.

  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

157 AED

Estimated delivery: 6 - 7 December

SKU:HI93735-00

The HI93735-00 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the EPA recommended method 130.1 in which the reaction between calcium, magnesium, and the reagents causes a red-violet tint in the sample. By simply adding liquid reagent A, two drops of reagent B, and the packet of reagent C to the sample, the reaction between calcium and magnesium and the reagents causes a color change dependent upon concentration. The intensity of color is determined by the compatible HI96735 photometer and the concentration will be displayed. The results will be displayed in mg/L (ppm) as CaCO3. These reagents are designed to be used with samples that have an expected range of 0 to 250 mg/L (ppm) CaCO3 total hardness.

Specifications

SKUHI93735-00
NameTotal Hardness Low Range Colorimetric Reagents (100 tests) – HI93735-00
PackageBottles and packets
Quantity100 tests
MethodAdaptation of the EPA recommended method 130.1. The reaction between calcium, magnesium, and the reagents causes a red-violet tint in the sample.

Manuals

Total Hardness Low Range Colorimetric Reagents (100 tests) – HI93735-00

Bestsellers

Sold out
Quick view
Read more
Inquire Now

Digital PEI Body pH Electrode with Matching Pin for Field Applications - HI12301

481 AED
The HI12301 is a plastic body, double junction, gel filled pH electrode with a matching pin and built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The matching pin integrated into the HI12301 is for the Sensor Check™ capability of the edge pH meter; this feature is used to identify problems with the pH electrode such as cracks in the sensing glass or poor condition of the reference junction. The HI12301 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with low temperature glass. The electrode has a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications.
  • Matching Pin for enabling Sensor Check feature that alerts to a broken electrode or clogged junction
  • Double Junction Reference
  • 3.5 mm Connector
Read more
Sold out
Quick view
Read more
Inquire Now

edge® Multiparameter EC/TDS/Salinity Meter - HI2030

2,530 AED
edge’s groundbreaking design is the culmination of Hanna’s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5” thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.
Read more
Quick view
Add to cart

HI7004L pH 4.01 Calibration Solution (500 mL)

55 AED
HI7004L is a premium quality pH 4.01 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Add to cart
Quick view
Add to cart

Combo pH/Conductivity/TDS Tester (Low Range) - HI98129

630 AED
The HI98129 makes measuring pH quick and easy! This lightweight, waterproof tester offers high accuracy pH, low range EC/TDS (0 to 3999 µS/cm EC/ 0 to 2000 ppm TDS) and temperature measurements in a single handheld unit! No more switching between meters for your routine measurements.
  • Waterproof
  • Replaceable pH electrode with extractable junction
  • Automatic calibration
Add to cart
Quick view
Add to cart

HI7004/1L pH 4.01 Calibration Solution (1 L)

70 AED
HI7004/1L is a premium quality pH 4.01 calibration solution that has been dyed red for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
  • Air-tight Seal
Add to cart
Sold out
Quick view
Read more
Inquire Now

Digital Glass Body pH Electrode for Semi-Solids and Emulsions - HI10530

743 AED
The HI10530 is a digital glass body, refillable, double junction pH electrode that has a built-in temperature sensor. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI10530 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a triple ceramic junction in the outer junction and the conical pH sensing portion is made with low temperature glass. This design consideration is ideal for emulsions, fats and creams, soil and semi-solid samples, low conductivity solutions, and for measuring samples at cold temperatures.
  • Built-In Microchip
  • Built-In Temperature Sensor
  • Triple Ceramic Junction
  • 3.5 mm Connector
Read more
Quick view
Add to cart

HI7007/1L pH 7.01 Calibration Solution (1 L)

70 AED
HI7007/1L is a premium quality pH 7.01 calibration solution that has been dyed green for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
  • Air-tight Seal
Add to cart
Back to Top
Whatsapp
Product has been added to your cart
Close