PICCOLO® is a revolutionary pH meter with a 4-in-1 amplified electrode. Conventional pH meters are susceptible to the weak, high impedance signal which makes the electrode, connector, cable and meter vulnerable to noise, humidity and dirty environments. PICCOLO® has overcome these problems with a pre-amplified electrode delivering a strong signal to the meter. The interchangeable electrode is inexpensive, rugged and houses the pH sensor, reference system, temperature sensor and the amplifier module.
The PICCOLO® is a lightweight digital tester that is easy to use with a replaceable probe.
Features at-a-glance:
Pre-amplified electrode
Automatic Temperature Compensation
Easy two-point manual calibration
100 hour battery life
Simple to use
Economical
Specifications
SKU
HI98111
Name
PICCOLO® pH Tester with 3.5” Probe – HI98111
pH Range
1.00 to 13.00 pH
pH Resolution
0.01 pH
pH Accuracy
±0.01 pH
pH Calibration
manual, two points
pH Temperature Compensation
automatic from 0 to 70°C (32 to 158°F)
pH Electrode
HI1280
Battery Type/Life
1.5V (3) / approximately 100 hours of continuous use
Environment
0 to 50°C (32 to 122°F); RH max 95%
Dimensions
194 x 29 x 15 mm (7.6 x 1.1 x 0.6”)
Weight
70 g (2.5 oz.)
Ordering Info
HI98111 (PICCOLO®) is supplied with 90 mm (3.5”) HI1280 amplified pH electrode, pH 4.01 and pH 7.01 buffer solution sachets, calibration screwdriver, batteries, rugged carrying case and instructions.
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes.
The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
The HI96801 is a rugged, portable digital refractometer for food products designed to report the sugar content of aqueous solutions as % Brix. The HI96801 report the results with an accuracy of ±0.2% Brix. The operation of the meter is simplified with only two buttons: one button is to calibrate with distilled or deionized water and the other to take a measurement. All readings are automatically compensated for temperature variations according to the ICUMSA Methods Book standard and displayed within a 1.5 second response time. The sealed flint glass prism and stainless steel well are easy to clean. Just wipe with a soft cloth in preparation for the next sample.
Sample size as small as 2 metric drops (100 µl)
Sealed stainless steel well with high-grade optical prism made of flint glass
Fast 1.5 second response time for temperature compensated readings
HI7033/1L is a premium quality 84 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
Air tight bottle with tamper-proof seal to ensure quality
The HI98103 Checker is the next generation of the original Hanna Checker pH tester. The Checker is the most popular pH meter in the world with over 1 million meters used since its introduction in 1991. From students to researchers, the Checker has been helping people with their pH measurement as a meter that is simple to use and operate.
HI7007-050 is a high quality pH 7.01 calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
Supplied with Certificate of Analysis
Accuracy of ±0.02 pH @ 25℃
Temperature chart of the actual pH value at various temperatures printed on each bottle
The HI14142 HALO is an innovative pH electrode with Bluetooth® Smart technology designed for flat surfaces
Our HALO® Wireless pH Meter for Flat Surfaces has a flat tipped glass sensor and an open junction design to measure pH on flat surfaces or small volume samples. All readings are transmitted directly to your Apple or Android device or the edge®blu.
One Press Connect
Easily connect to the Hanna Lab App at the press of a button via Bluetooth wireless technology.
Status Indicator
Visible from a distance, the LED “halo” light flashes to indicate the status of the probe.
Easy-to-Replace battery
The HALOs CR2032 lithium ion battery is easily replaceable and lasts for approximately 500 hours.
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass.
This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.