0
0

Cart (0)

Home>All Products>Products>Photometers>Photometers - Checker Colorimeters>Marine Magnesium Checker HC Handheld Colorimeter – HI783
Marine Magnesium Checker HC Handheld Colorimeter - HI783
Marine Magnesium Checker HC Handheld Colorimeter - HI783 - Image 2
Marine Magnesium Checker HC Handheld Colorimeter - HI783 - Image 3

In stock

Marine Magnesium Checker HC Handheld Colorimeter – HI783

The HI783 Marine Magnesium Checker HC is a handheld colorimeter that uses the Beer- Lambert principle to determine the concentration of magnesium colorimetrically. The HI783 is designed specifically to measure magnesium levels in a saltwater aquarium or in marine biology applications. The 1000 to 1800 ppm range is ideal for coral/fish or fish-only aquarium maintenance.

  • Ideal for aquariums and marine biology
  • Easier to use and more accurate than chemical test kits
  • Small size, big convenience

251.00 AED

Estimated delivery: 25 - 26 February

SKU:HI783

Magnesium is the third most abundant ion in seawater, surpassed only by sodium and chloride. Its abundance is critical in the formation of weak ion pairs with carbonate ions. This allows calcium and carbonate ions to be available for uptake by corals and invertebrates. Low levels of magnesium lead to low or unstable levels of calcium and alkalinity. Signs of lowmagnesium levels include precipitation of calcium as insoluble calcium carbonate and impaired inhabitant growth and health.

Primary Applications:

Marine, Saltwater Aquariums, Aquaculture

Specifications

SKU HI783
Name Marine Magnesium Checker HC Handheld Colorimeter – HI783
Range 1000 to 1800 ppm Magnesium
Resolution 5 ppm
Accuracy ±5% of reading @ 25 °C (77 °F)
Light source Light Emitting Diode @ 610 nm
Light detector Silicon photocell
Method Adaptation of the colorimetric EDTA method using calmagite indicator. The reaction between magnesium and the reagents causes a blue to violet tint in the sample.
Environment 0 to 50 °C (32 to 122 °F); max. 95% RH non-condensing Prepared sample cuvette (sample plus reagents) must be 18 to 28 °C (64 to 82 °F).
Battery type 1.5V AAA Alkaline
Auto shut-off After 10 minutes of non-use
Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”)
Weight 64 g (2.3 oz)
Interferences Calcium below 300 ppm and above 500 ppm

Manuals

Marine Magnesium Checker HC Handheld Colorimeter – HI783

Bestsellers

HI98103 Ph Testerhi-98103-pocket-checker-ph-tester-1
Hot
Quick view
Add to cart

Checker® pH Tester with 0.1 pH Resolution - HI98103

132.00 AED
The HI98103 Checker is the next generation of the original Hanna Checker pH tester. The Checker is the most popular pH meter in the world with over 1 million meters used since its introduction in 1991. From students to researchers, the Checker has been helping people with their pH measurement as a meter that is simple to use and operate.
  • One-button operation
  • Replaceable pH electrode
  • ±0.2 pH accuracy
Add to cart
Sold out
Quick view
Read more
Inquire Now

Flat Tip pH Electrode for Pulp and Paper with Quick Connect DIN Connector - HI14143

638.00 AED
The HI14143 is a glass body, single reference junction pH electrode made with low temperature glass and a quick connect DIN connector. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe’s flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. The HI14143 is recommended for use with Hanna’s HI99171 pH meter.
  • Open Junction
  • Flat Tip
  • Built-In Temperature Sensor
Read more
Quick view
Add to cart

Dispensing Tubing and Fitting for HI903 - HI900580

348.00 AED
The HI900580 is a dispensing tube and fitting assembly for the titrant burette on the HI903 Karl Fischer Titration System. The tubes are constructed of durable, chemically resistant PTFE and feature a light-blocking polyurethane outer sleeve. HI900580 comes supplied with the PTFE titrant tubing, blue tubing protection, and tube lock.
  • Chemically resistant
  • Quick replacement
  • Easy to assemble
Add to cart
Quick view
Add to cart

Spare Dissolved Oxygen Screw Cap Membranes - HI76407A/P

286.00 AED
The HI76407A/P are spare dissolved oxygen screwcap membranes designed especially for Hanna’s portable polarographic dissolved oxygen probes. The caps are constructed of durable ABS plastic with polytetrafluoroethylene (PTFE) oxygen permeable membranes. Each cap is easily filled with electrolyte and installed on the probe.
  • Pre-tensioned PTFE Membranes
  • Screw Cap Design
Add to cart
Sold out
Quick view
Read more
Inquire Now

Calibration Check Key at -0.4°F (HI762 Probes) - HI762-004F

105.00 AED
The HI762-004F is a calibration check key for thermistor thermometers that use the HI762 series of probes. Designed to simulate -0.4℉ (±0.8℉), this key offers a fast and simple way of checking the accuracy of your instrument.
  • -0.4℉ Key Rated Value
  • Simple, Quick Verification
  • For Thermistors with HI762 Probes
Read more
Quick view
Read more
Inquire Now

Marine Line Ammonia Checker HC - HI784

The HI784 Marine Ammonia Checker HC is a handheld colorimeter that uses the Beer-Lambert principle to determine the concentration of ammonia colorimetrically. The HI784 is designed specifically to measure ammonia levels in a saltwater aquarium. The 0.00 to 2.50 ppm range is ideal for coral/fish or fish-only aquarium maintenance.
  • Ideal for aquariums and marine biology
  • Easier to use and more accurate than chemical test kits
  • Small size, big convenience
Primary Applications: Marine, Saltwater Aquariums, Aquaculture
Read more
Sold out
Quick view
Read more
Inquire Now

HI38020-200 Free and Total Chlorine (Low, Medium, and High Range) Test Kit Replacement Reagents (200 tests)

186.00 AED
The HI38020-200 are replacement reagents for the colorimetric determination of free and total chlorine with the HI38020 Free and Total Chlorine Low, Medium, and High Range Test Kit. There are enough reagents for approximately 200 tests to be used with Hanna’s test kit. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-made reagents for ease of use
  • Prepared with high-purity chemicals
  • Marked with expiration date and lot number for traceability
Read more
Back to Top
Whatsapp
Product has been added to your cart
Close