Out of stock

Infrared Thermometer for the Food Industry – HI99550

The HI99550 is an infrared thermometer designed to measure surface temperatures for the food industry. With a quick, one-second response time and battery life indicator, this thermometer is an ideal solution for non-intrusive infrared measurements.

  • ±2% (of reading) or ±2°C Accuracy
  • One-second Response Time
  • Battery life indicator

AED

Estimated delivery: 20 - 21 May

SKU:HI99550-00

The HI99550 Infrared Thermometer is a durable meter that can be used throughout the food industry. The HI99550 offers features such as a quick, one-second response time, battery life indicator, and is designed with a wrist-strap and ergonomic shape for greater ease of use.

The non-intrusive nature of the HI99550 is particularly attractive in the food industry since it translates itself into substantial savings by leaving products intact, especially those sealed or pre-wrapped. This type of non-intrusive measurement is also useful when the surface temperature is high, for difficult-to-reach places, or hygiene requirements must be followed. 

Taking the temperature of an object is easy with the HI99550; simply aim the sensor in the direction of the object, press the “ON/OFF” button pressed for a few seconds until the reading stabilizes.The measured value will be immediately displayed on the LCD.

Features at-a-glance

℃ Readout – Measurements are displayed in degrees Celsius on the clear, easy to read LCD display.

Optic Coefficient – The optic coefficient is the distance between the sensor and the measured object is an important factor in infrared measurement. With a 3:1 relationship between the distance and object area, the HI99550 can measure an area with a diameter that is one third of the distance between the sensor and the object.

Fixed Emissivity – Emissivity is the ratio of infrared radiation emitted by an object to that emitted by a perfect black body at the same temperature. The HI99550 was designed to measure the temperature of objects with an emissivity of 0.95, which is characteristic of most objects and surfaces being measured.

Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.

Specifications

SKU HI99550-00
Name Infrared Thermometer for the Food Industry – HI99550
Temperature Range -10 to 300°C
Temperature Resolution 1°C
Temperature Accuracy ±2% of reading or ±2°C
Battery Type/Life 9V / approximately 150 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 143 x 80 x 38 mm (5.6 x 3.2 x 1.5”)
Weight 320 g (11.3 oz)

Manuals

Infrared Thermometer for the Food Industry – HI99550

Bestsellers

GroLine Hydroponic Waterproof Pocket pH/EC/TDS/Temperature Tester - HI98131

663 AED
The HI98131 is a slim, lightweight, and waterproof pocket sized meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature. The meter operation is simplified with two buttons. One is used for on/off and for calibration while the other is used to switch between the measurement modes. The HI98131 has advanced features including a selectable EC to TDS conversion factor (0.5 - 500 ppm and 0.7 - 700 ppm).
  • 3 parameters, pH, EC/TDS and temperature, in one meter
  • Quick Cal Mode to calibrate pH and EC/TDS with one solution
  • TDS Conversion Factor selectable between 0.5 (500 ppm) and 0.7 (700 ppm)

1413 µS/cm Conductivity Standard (1 L) – HI7031/1L

70 AED
HI7031/1L is a premium quality 1, 413 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality

Multiparameter pH/ORP/EC/Pressure/Temperature Waterproof Meter - HI98195

3,876 AED
The HI98195 is a waterproof portable logging multiparameter meter that monitors up to 10 different water quality parameters including 5 measured and 5 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The complete system is simple to setup and easy to use. The HI98195 is supplied with all necessary accessories and packaged in a durable carrying case.
  • Multi-Parameter Display
  • Multi-sensor Probe
  • USB Connection

COD Low Range Reagent Vials, EPA Method (25 tests) - HI93754A-25

236 AED
The HI93754A-25 are barcode reagent vials that follow the EPA approved method for the low range determination of chemical oxygen demand (COD) using a compatible benchtop photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each box for traceability.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

pH 2.00 Technical Calibration Buffer (1 L) - HI5002-01

150 AED
HI5002-01 is a premium quality pH 2.00 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI5012 pH 12.00 Technical Calibration Buffer (500 mL)

102 AED
HI5012 is a premium quality pH 12.00 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)

55 AED
HI7032L is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is prepared against a NIST traceable potassium chloride solution. Hanna TDS solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • 1, 382 mg/L (ppm) TDS calibration solution
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Back to Top
img
Product has been added to your cart