-
-
Wastewater Multiparameter (with COD) Benchtop Photometer and pH meter - HI83314 (230V)
14,584.00 AED4,125.60 AED -
COD Test Tube Heater - HI839800 (230V)
14,600.00 AED4,140.00 AED -
-
-
HI7010/1L pH 10.01 Calibration Solution (1 L)
177.00 AED61.60 AED -
HI7007/1L pH 7.01 Calibration Solution (1 L)
177.00 AED61.60 AED -
HI7004/1L pH 4.01 Calibration Solution (1 L)
177.00 AED61.60 AED -
Hanna edge® EC/TDS/Salinity Meter Bundle with Calibration Standards – HI2003-02
2,651.00 AED2,385.29 AED × -
edge® Dedicated Conductivity/TDS/Salinity Meter - HI2003
12,470.00 AED2,223.00 AED -
HI7031L 1413 µS/cm Conductivity Standard (500mL Bottle)
159.00 AED53.10 AED -
HI7032L 1382 mg/L (ppm) TDS Calibration Solution (500mL Bottle)
161.00 AED54.90 AED -
HI7033L 84 µS/cm Conductivity Standard (500mL Bottle)
161.00 AED54.29 AED -
Showing all 3 resultsSorted by popularity
ORP Electrode for Process Control and Monitoring - HI2001
680.00 AED
HI2001 is an economical process ORP probe with a BNC connector. The BNC connector is universal and works with any ORP (mV) meter that has a BNC probe input. The HI2001 is a double junction design with a polymer reference for long life in many common industrial applications.
1/2" and 3/4" NPT threads for in-line and submersion mounting
Chemically resistant PTFE junction
Universal BNC connector
HI1000 Series Process Digital pH Probe-10m (32.8')-HT - High Temperature-PTFE
1,544.00 AED
The HI1000 series of digital pH probes are industrial sensors used for monitoring and control applications. These probes are available with a choice of ceramic or PTFE reference junction and glass types. All probes have a built-in pt100 temperature sensor and have a chemically resistant PVDF body that has ¾” NPT threads on the front end for insertion mounting.
These probes are compatible with the HI510 Universal Process Controller.
- Available with 3 glass types including high and low temperature formulations.
- Choice standard ceramic junction or chemically resistant PTFE junction.
- Digital probe that transmits data by RS485 connection which is immune to electrical interferences associated with standard analog probes.
pH Electrode for Process Control and Monitoring - HI1001
618.00 AED
The HI1001 is a flow-thru monitoring pH electrode with BNC connection and 3 m cable that has been specifically built for industrial applications. This durable electrode is composed of a PVDF body with a protective PEI sleeve around the glass bulb for resistance against mechanical stress. This sensor provides a rapid response and high accuracy pH measurements for industrial applications.
- 1/2" NPT threads for in-line mounting
- PTFE junction
- BNC universal connector
