Showing all 10 resultsSorted by popularity
HI7061L General Purpose Cleaning Solution (500 mL)
61.00 AED
HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
HI70300L Electrode Storage Solution (500 mL)
59.00 AED
HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any effects of diffusion/osmotic from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300L storage solution for at least one hour before taking measurements.
- Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
- Manufactured specifically for pH and ORP electrodes
- Clearly marked expiration date and lot number
COD Test Tube Heater - HI839800 (230V)
4,600.00 AED
The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150℃ and 105℃. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display.
- Low and high temperature alerts
- Built-in countdown timer
- Status indicator lights
Inquire Now
Automatic Potentiometric Titrator with Two Probe Inputs (230V)
The HI932 Automatic Titrator is the answer to your dedicated titration needs. Fully customizable, the HI932 delivers accurate results and intuitive user experience, all in a compact package. Titrate for a variety of measurements at the push of a button including acids, bases, redox, and selective ions. No additional programming upgrades to purchase. The only things you need to start using the HI932 are a sensor and titrant.
- Small footprint so you can fully optimize your benchtop space.
- HI932 can be ordered with one or two analog boards for sequential linked titrations
- HI932 is compatible with HI922 autosampler for analyzing up to 18 samples at a time
HI7071 Electrolyte Fill Solution, 3.5M KCl + AgCl (30 mL x 4)
265.00 AED
HI7071 is a pH and ORP electrode fill solution that contains 3.5M KCl + AgCl, which is specifically made for single junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for single junction pH & ORP electrodes
- Convenient 30 mL bottles
- Clearly marked bottle with expiration date and lot number
Cuvette Cleaning Solution (230 mL) - HI93703-50
130.00 AED
HI93703-50 is an alcohol based cleaning solution for cuvettes/vials used in photometers and turbidity meters. This anti-static solution ensures the glass cuvette used for colorimetric and turbidimetric measurements remains clean and free from imperfections.
- Anti-static
- Air tight seal
- Marked with lot number and expiration date
Lab Safety Shield - HI740217
313.00 AED
The HI740217 is a lab safety shield recommended for use with the HI839800 COD Test Tube Heater.
- Full protective coverage
- Custom fit for HI839800
- Supports laboratory safety measures
Microfiber Cloth for Wiping Cuvettes (4) - HI731318
62.00 AED
HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints from the vials so that the glass is clean for the unimpeded transmission of light.
- Lint free
- Will not scratch glass cuvettes
Refillable Combination ORP Electrode with BNC Connector - HI3131B
833.00 AED
The HI3131B is a glass body, refillable, single junction ORP electrode with a BNC connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin.This design consideration is ideal for laboratories and general purpose ORP measurements, as well as for use as an indicating electrode in ORP titrations.Refillable ElectrodeSingle Ceramic JunctionPlatinum Pin
