Active filters:
Showing 277–288 of 533 results
Ammonia Medium-Range Checker® HC - HI715
237.00 AED
The Hanna Ammonia Medium-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Ammonia Medium-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
Inquire Now
Phosphate Low-Range Checker® Reagents (25 Tests) - HI713-25
The HI713-25 are the replacement reagents for the HI713 Phosphate Low-Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
- Pre-made reagents for ease of use
- Prepared with high-purity chemicals
- Marked with expiration date and lot number for traceability
Free Chlorine Checker HC® Calibration Check Set - HI701-11
59.00 AED
The Free Chlorine Checker HC® Calibration Check Set - HI701-11 provides a simple solution to validating the Free Chlorine Checker® HC - HI701 in the range of 0.00 to 2.50 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date to provide traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 1.00 ±0.05 ppm free chlorine @ 25℃
- Reusable with long shelf life stability
HI70032P 1382 mg/L (ppm) TDS Calibration Solution (25 x 20mL)
121.00 AED
HI70032P is a premium quality 1, 382 mg/L (ppm) TDS calibration solution that is NIST traceable and contained in portable single-use sachets.. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of TDS calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70032P is for 25 sachets containing 20 mL of solution.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Convenient packaging for one time use
35.00 ppt Marine Salinity Calibration Standard (25 x 20 ml) - HI70024P
121.00 AED
HI70024P is a premium quality 35.00 ppt marine salinity calibration standard that is NIST traceable and contained in portable single-use sachets. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of conductivity solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI70024P is for 25 sachets containing 20 mL of solution.
- 35.00 ppt @ 25℃ salinity value.
- Temperature chart of the actual ppt value at various temperatures printed on each sachet
- Convenient packaging for one time use
Flat Tip pH Electrode for Pulp and Paper with Quick Connect DIN Connector - HI14143
638.00 AED
The HI14143 is a glass body, single reference junction pH electrode made with low temperature glass and a quick connect DIN connector. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design.
This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe’s flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. The HI14143 is recommended for use with Hanna’s HI99171 pH meter.
- Open Junction
- Flat Tip
- Built-In Temperature Sensor
Chlorine, pH, ORP, and Temperature Analyzers - PCA300 Series-PCA320 - Chlorine, pH & Temperature
7,331.00 AED
The Hanna Instruments PCA310, PCA320, PCA330 and PCA340 series of chlorine, pH, ORP and temperature analyzers are microprocessor controlled, process analyzers which continuously monitor a sample stream for chlorine content, pH, ORP and temperature values.
- 4 models available for monitoring chlorine, pH, and ORP levels.
- Two separate selectable 0-20 or 4-20 mA signal output (PCA340 only)
- User-friendly interface simplifies setup and maintenance.
Chlorine, pH, ORP, and Temperature Analyzers - PCA300 Series-PCA310 - Chlorine
6,945.00 AED
The Hanna Instruments PCA310, PCA320, PCA330 and PCA340 series of chlorine, pH, ORP and temperature analyzers are microprocessor controlled, process analyzers which continuously monitor a sample stream for chlorine content, pH, ORP and temperature values.
- 4 models available for monitoring chlorine, pH, and ORP levels.
- Two separate selectable 0-20 or 4-20 mA signal output (PCA340 only)
- User-friendly interface simplifies setup and maintenance.
Direct Soil Measurement pH Portable Meter - HI99121
1,776.00 AED
The HI99121 is the perfect portable pH meter for soil testing. With the HI99121 and HI12923 direct soil pre-amplified pH and temperature probe, users can test both the pH of soil directly or after preparation of a soil slurry with deionized water. The HI12923 features a conical, rugged tip that can be directly inserted into moist or soft soil. For harder soils, the kit includes a plastic auger to perforate the ground.
- Automatic Temperature Compensation
- Automatic Two-Point Calibration
- Waterproof
Pool Line ISO Portable Turbidity Meter – HI987134 (230V)
The HI987134 is a high accuracy portable turbidity meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI987134 meets and exceeds the requirements of the ISO 7027 Method for turbidimetric measurements.
- Fast Tracker™ - Tag Identification System (T.I.S)
- USB for data transfer
- Up to four-point calibration
Multiparameter Bluetooth® portable pH/EC/OPDO Meter - HI98494
9,645.00 AED
HI98494 is a waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. Data logged in the meter can be transferred by Bluetooth® to a smart device with the Hanna Lab App installed. The HI98494 is supplied with all necessary accessories and packaged in a durable carrying case.
- Bluetooth® Connectivity
- OPDO: Optical Dissolved Oxygen Technology
- 12 Parameter Dot Matrix Display
DiST® 5 EC/TDS/Temperature Tester (0-3999 µS/cm) - HI98311
437.00 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with its affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®5.
- Waterproof
- Exposed temperature probe for fast response
- Low range EC/TDS 0 to 3999 uS/cm 0 to 2000 ppm (mg/L)
