Active filters:
Showing 241–252 of 522 results
Nitrite Low Range Checker® Reagents (25 Tests) - HI707-25
68.00 AED
The HI707-25 are the replacement reagents for the HI707 Nitrite Low Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability.
- Pre-made reagents for ease of use
- Prepared with high purity chemicals
- Marked with expiration date and lot number for traceability
Nitrite Low-Range Checker® HC Calibration Check Set - HI707-11
90.00 AED
The Nitrite Low-Range Checker® HC Calibration Check Set - HI707-11 provides a simple solution to validating the Nitrite Low-Range Checker® HC - HI707 in the range of 0 to 600 ppb nitrite. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
- Supplied with Certificate of Analysis
- Standard value of 100 ±10 ppb nitrite @ 25℃
- Reusable with long shelf life stability
HI7071 Electrolyte Fill Solution, 3.5M KCl + AgCl (30 mL x 4)
265.00 AED
HI7071 is a pH and ORP electrode fill solution that contains 3.5M KCl + AgCl, which is specifically made for single junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.
- Fill solution for single junction pH & ORP electrodes
- Convenient 30 mL bottles
- Clearly marked bottle with expiration date and lot number
Nitrite Low-Range Checker® HC-HI707
237.00 AED
The Hanna Nitrite Low-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine absorbance and ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Nitrite Low Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
- Compact, Portable Design
- Built-in Timer
- One-Button Operation
HI70630L Grease and Fats Acid Cleaning Solution (500 mL)
129.00 AED
The HI70630L is an effective acidic cleaning solution that is specially formulated for use in applications where a pH electrode can be coated with grease and fats. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture.
- Specially formulated cleaning solution to remove meat grease and fats from a pH electrode
- Air tight bottle with tamper-proof seal to ensure quality
- Expiration date and lot number clearly marked on the bottle
HI7061M General Purpose Cleaning Solution (230 mL)
54.00 AED
HI7061M is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
- Specially formulated for cleaning electrodes
- Air tight seal to ensure quality
- Expiration date and lot number
Sulfuric Acid 0.05M, 1L - HI70459
71.00 AED
HI70459 is a sulfuric acid titrant for use in standard acid-base titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Air-Tight
- Acid-Base Reagent
- Tamper-Proof Seal
Silver Nitrate 0.02M, 1L - HI70448
175.00 AED
HI70448 is a silver nitrate titrant for use in standard argentometric titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Air-Tight
- Argentometric Reagent
- Tamper-Proof Seal
Amino-Methyl Propanol Buffer Reagent, 25 mL - HI70424
86.00 AED
HI70424 is an amino-methyl propanol buffer reagent for use in standard titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Air-Tight
- Hardness Reagent
- Light Blocking Bottle
HI7041L Dissolved Oxygen Electrolyte Solution (500 mL)
279.00 AED
The HI7041L electrolyte fill solution has been developed for Hanna’s polarographic dissolved oxygen probes. Having the correct electrolyte solution is crucial to the performance of your dissolved oxygen probe.
- Made with reagent grade chemicals
- Long-lasting supply of electrolyte
100% NaCl Calibration Solution for Seawater Salinty Readings (500 mL) - HI7037L
54.00 AED
HI7037L is a premium quality 100% NaCl calibration solution for % readings of salinity. Hanna calibration solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
- NaCl calibration solution for % readings of salinity
- Air tight bottle with tamper-proof seal to ensure quality
- Lot number and expiration date printed on each label
111, 800 µS/cm Conductivity Standard (1 L) – HI7035/1L
77.00 AED
HI7035/1L is a premium quality 111, 800 µS/cm conductivity standard that is prepared against an NIST traceable potassium chloride solution. Hanna conductivity solutions are airtight with a tamperproof seal to ensure the quality of the solution. Each bottle is clearly marked with the lot number and expiration date. Hanna's line of conductivity standards is specially formulated to be valid for 5 years from the date of manufacture for an unopened bottle.
- Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
- Air tight bottle with tamper-proof seal to ensure quality
