Showing 385–396 of 2451 resultsSorted by popularity
Inquire Now
Calibration Standards for Haze Meter - HI847492-11
440.00 AED
The HI847492-11 Calibration Standards provide a simple solution to calibrating and validating the HI847492 Haze Meter for Beer Quality Analysis. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.1, 15, 100, and 800 FTU
- Reusable with long shelf-life stability
Inquire Now
Panel-mounted pH Analog Indicator with Self Diagnostic Test – HI8510
1,942.00 AED
HI8510 is ideal for monitoring pH in process control. It provides highly accurate pH measurements and displays values on an easy-to-read LCD. BNC input, amplified probe input and input from transmitter are supported.
- Automatic temperature compensation ensures fast, accurately compensated readings
- Displays values on the easy to read LCD
- A removable, transparent splash-proof cover protects the front panel
- ±5V power output and input terminals for amplified electrodes
Inquire Now
pH Transmitter with 4-20 mA Galvanically Isolated Output - HI8614
The HI8614N and HI8614LN are a water-resistant pH transmitters designed to be used with a standard high impedance pH probe with BNC connector. The signal is then processed by a special high impedance amplifier, which transmits an output current directly proportional to the input signal but independent of changes in load or cable capacitance.
- Temperature compensation ensures fast, accurately compensated readings even during sudden temperature fluctuations.
- Water resistant design for use in process control.
- HI8614LN has optional backlit, LCD display for easy viewing (no LCD on HI8614N)
Inquire Now
ORP Transmitter with 4-20 mA Galvanically Isolated Output - HI8615
HI 8615 / HI 8615L (ORP) are 2-wire water-resistant transmitters specially designed for long distance measurement of ORP in industrial applications.
- Designed for transmitting ORP measurements from remote locations in industrial environments.
- Water resistant design for use in process control.
- HI8615LN has optional backlit, LCD display for easy viewing (no LCD on HI8615N)
Inquire Now
Multi-Range EC Meter with Manual Temperature Compensation - HI8633
1,235.00 AED
The HI8633 Multi-Range EC Meter is designed for use in areas of production and quality control. Conductivity readings are adjusted with manual temperature compensation, assuring users of consistently accurate measurements.
- Four-ring probe
- Four measuring modes
- Measurement ranges from 0.0 µS/cm to 1999 mS/cm with a ±1% FS accuracy
Inquire Now
Relative Humidity and Temperature Transmitter - HI8666
The HI8666 is a solid-state, wall-mounted transmitter for on-site, continuous monitoring of relative humidity and temperature in critical or controlled environments. It is equipped with a removable sintered cap, has excellent accuracy, and can communicate signals to remote panel meters, controllers, or data acquisition systems.
- Integrated sensor
- Continuous monitoring
- Removable sintered cap
Inquire Now
pH Analog Controller with Self-Diagnostic Test – HI8710
2,270.00 AED
HI8710 is a panel mounted pH controller with self-diagnostic test capabilities. Users can set: the setpoint for acid or alkaline dosage, the tolerance of the setpoint before an alarm is activated, the dosage mode: automatic, continuous on or OFF and the over dosage control by setting the overtime dosage knob.
- Hanna’s exclusive Fail Safe Alarm System protects against risks typical of industrial environments
- Temperature compensation ensures fast, accurately compensated readings
- Backlit, LCD display for easy viewing
Inquire Now
pH Analog Controller with Dual Output and Self-Diagnostic Test – HI8711
2,415.00 AED
HI8711 allows the selection of two set points with two independent outputs for acid and alkaline dosages.
- Auto-diagnostics to verify offset, slope calibration, and electrode contamination/deterioration
- Hanna’s exclusive Fail Safe Alarm System protects against risks typical of industrial environments
- Selectable manual ON, OFF and automatic dosing control for alkaline and acid dosing with indicator
- 0.2 to 3.00 pH alarm tolerance range
Inquire Now
ORP Analog Controller with Self-Diagnostic Test – HI8720
2,270.00 AED
HI8720 ORP panel mounted controller is ideal for process control monitoring in a wide range of industrial applications, allowing for the selection of a set point for oxidizing or reducing dosage.
- Auto-diagnostic tests for electrode and instrument status.
- Displays values on the easy to read LCD.
- A removable, transparent splash-proof cover protects the front panel.
Inquire Now
EC and Resistivity Portable Meter - HI87314
The HI87314 is a durable, portable EC and resistivity meter designed for use in manufacturing and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of EC measurement and one range of resistivity measurement. All readings are automatically adjusted for temperature, assuring users of consistent and accurate measurements.
- Four-ring probe
- DIN Connection
- Adjustable temperature coefficient (β)
Multi-range EC Meter - HI8733
1,737.00 AED
The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements.Four-ring probeFour measuring modesAutomatic Temperature Compensation
Three Range Portable TDS Meter - HI8734
1,737.00 AED
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applicaitons. It can also be used for a wide variety of environmental conditions. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
- Four-ring probe
- measurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy
- Manual Temperature Compensation
