Showing 373–384 of 2445 results
Inquire Now
Relative Humidity and Temperature Transmitter - HI8666
The HI8666 is a solid-state, wall-mounted transmitter for on-site, continuous monitoring of relative humidity and temperature in critical or controlled environments. It is equipped with a removable sintered cap, has excellent accuracy, and can communicate signals to remote panel meters, controllers, or data acquisition systems.
- Integrated sensor
- Continuous monitoring
- Removable sintered cap
Inquire Now
pH Analog Controller with Self-Diagnostic Test – HI8710
2,270.00 AED
HI8710 is a panel mounted pH controller with self-diagnostic test capabilities. Users can set: the setpoint for acid or alkaline dosage, the tolerance of the setpoint before an alarm is activated, the dosage mode: automatic, continuous on or OFF and the over dosage control by setting the overtime dosage knob.
- Hanna’s exclusive Fail Safe Alarm System protects against risks typical of industrial environments
- Temperature compensation ensures fast, accurately compensated readings
- Backlit, LCD display for easy viewing
Inquire Now
pH Analog Controller with Dual Output and Self-Diagnostic Test – HI8711
2,415.00 AED
HI8711 allows the selection of two set points with two independent outputs for acid and alkaline dosages.
- Auto-diagnostics to verify offset, slope calibration, and electrode contamination/deterioration
- Hanna’s exclusive Fail Safe Alarm System protects against risks typical of industrial environments
- Selectable manual ON, OFF and automatic dosing control for alkaline and acid dosing with indicator
- 0.2 to 3.00 pH alarm tolerance range
Inquire Now
ORP Analog Controller with Self-Diagnostic Test – HI8720
2,270.00 AED
HI8720 ORP panel mounted controller is ideal for process control monitoring in a wide range of industrial applications, allowing for the selection of a set point for oxidizing or reducing dosage.
- Auto-diagnostic tests for electrode and instrument status.
- Displays values on the easy to read LCD.
- A removable, transparent splash-proof cover protects the front panel.
Inquire Now
EC and Resistivity Portable Meter - HI87314
The HI87314 is a durable, portable EC and resistivity meter designed for use in manufacturing and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of EC measurement and one range of resistivity measurement. All readings are automatically adjusted for temperature, assuring users of consistent and accurate measurements.
- Four-ring probe
- DIN Connection
- Adjustable temperature coefficient (β)
Multi-range EC Meter - HI8733
1,737.00 AED
The HI8733 is a durable, portable EC meter designed for use in areas of production and quality control. It is supplied with a four-ring conductivity probe to allow for four ranges of measurement. Conductivity readings are adjusted with Automatic Temperature Compensation (ATC), assuring users of consistent and accurate measurements.Four-ring probeFour measuring modesAutomatic Temperature Compensation
Three Range Portable TDS Meter - HI8734
1,737.00 AED
The HI8734 is a rugged, portable TDS meter designed for the water conditioning industry, particularly in the softening, demineralization, reverse osmosis, and drinking water applicaitons. It can also be used for a wide variety of environmental conditions. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
- Four-ring probe
- measurement ranges from 0.0 mg/L to 19.99 g/L with a ±1% FS accuracy
- Manual Temperature Compensation
Inquire Now
EPA Compliant Benchtop Turbidity Meter - HI88703
7,172.00 AED
The HI88703 is a high accuracy (±2% of reading plus 0.02 NTU) Turbidity Benchtop Meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI88703 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.
- Up to ±0.02 NTU accuracy
- Ratio and non-ratio turbidity modes
- USB for data transfer
Turbidity Calibration Standards - HI88703-11
426.00 AED
The HI88703-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 4000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.10, 15.0, 100, 750, and 2000 NTU
- Reusable with long shelf life stability
Inquire Now
ISO 7027 Compliant Benchtop Turbidity Meter - HI88713
7,384.00 AED
The HI88713 is a high accuracy benchtop turbidity meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI88713 meets and exceeds the requirements of the ISO 7027 Method for turbidimetric measurements.
- Compliant to ISO 7027 method
- Ratio and non-ratio turbidity modes
- USB for data transfer
Turbidity Calibration Standards - HI88713-11
426.00 AED
The HI88713-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 FNU range and 0.00 to 4000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- Standard values of <0.10, 15, 100, 750 FNU, and 2000 NTU
- Reusable with long shelf life stability
Inquire Now
Portable pH/mV/°C Meter with Recorder Output – HI8915
1,196.00 AED
HI8915 is a portable pH/mV/℃ meter that combines accurate pH measurements with a recorder output capability and automatic temperature compensation.
- Two recorder output terminals make it possible to attach a plotter or recorder directly to the meter for a hard copy of the measurements.
- Pressing the HOLD key will freeze the reading on the display.
- Calibration is performed using the two trimmers on the front panel.
