Showing 2269–2280 of 2448 resultsSorted by popularity
Turbidity Calibration Standards - HI98703-11
The HI98703-11 Turbidity Calibration Standards provide a simple solution to calibrating and validating turbidity meters that have a 0 to 1000 NTU range. Hanna turbidity calibration standards are prepared from NIST traceable primary standard reference materials and come supplied with a certificate of analysis. The certificate of analysis provides the lot number, reference values, and expiration date for traceability when certifying the appropriate turbidity meter.
- Supplied with Certificate of Analysis
- AMCO AEPA-1 primary turbidity standards
- Reusable with long shelf life stability
Turbidity (EPA) Portable Meter - HI98703
The HI98703 is a high accuracy (±2% of reading plus 0.02 NTU) Turbidity Portable Meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI98703 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.
- Fast Tracker™ - Tag Identification System (T.I.S)
- USB for data transfer
- Operates on batteries or line voltage
Checktemp® 1 Digital Thermometer - HI98509
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
- CAL Check™
- ℃/℉ readout
Inquire Now
Marine Salinity Waterproof Tester - HI98319
HI98319 is a digital salinity tester designed specifically for saltwater aquariums that displays results in parts per thousand (ppt), Practical Salinity Units (PSU), or specific gravity (S.G.). This waterproof tester uses an amperometric conductivity probe to determine the salt content in the water.
- Exposed Temperature Probe for Fast Response
- Measures salinity up to 70.00 ppt
- Waterproof and designed to float
GroLine Waterproof EC/TDS Tester - HI98318
HI98318 is our latest pocket meter for measuring the EC/TDS of a hydroponic nutrient solution. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The HI98318 has a very large easy to read LCD display that shows both EC or TDS and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one point calibration.
- Graphite Sensor for Reduced Polarization Effect
- Two-Button Operation
- Quick Calibration Mode using Hanna pH/EC Quick Cal Solution
DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
- Waterproof
- Exposed temperature probe for fast response
- High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)
DiST 2 Waterproof High-Range TDS Tester - HI98302
The Hanna Instruments HI98302 DiST 2 is a high-range, total dissolved solids tester than can measure up to 10.00 ppt (g/L); a rugged and reliable pocket-sized tester for use in the lab or field.
- Large Multi-level LCD
- Exposed Temperature Probe for Fast Response
- Simple Two-Button Operation
0 FNU Turbidity Calibration Solution (230 mL) - HI9829-16
HI9829-16 is a premium quality 0 FNU Turbidity Calibration Solution for use with the for the calibration of HI7609829 Turbidity Sensor on the HI9829 portable multiparameter meter in water quality applications. Hanna calibration solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
- Solution is 0 formazin nephelometric units (FNU)
- Tamperproof seal
- Lot number and expiration date on each sachet
10 ppm and 100 ppm Ammonium Calibration Standard Sachets for HI9829 (10 x 20 mL each) - HI9829-10/11
HI9829-10/11 is for premium quality 10 ppm and 100 ppm (mg/L) Ammonium (as N) calibration standards. These standards are used to calibrate the HI7609829-10 ammonium ISE. Each sachet has the lot number and expiration date stamped on it. The sachet is made of light block and air-tight foil ensuring freshness each time one is used. The HI9829-10/11 contains 10 sachets, each of the 10 ppm and 100 ppm Ammonium Calibration Standard (as N). Each sachet contains approximately 20 mL of buffer.
- Pre-mixed to exact standard value
- pH and ionic strength stabilized
- Lot number and expiration date on each sachet
Inquire Now13,233.00 AED Original price was: 13,233.00 AED.13,110.00 AEDCurrent price is: 13,110.00 AED.
HI9829 Multiparameter pH/ISE/EC/DO/Turbidity Waterproof Meter with GPS option-No-Basic probe - with turbidity-10m (32.8')
The HI9829 is a waterproof portable logging multiparameter meter that monitors up to 14 different water quality parameters. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, ammonium, chloride, nitrate, and temperature. The probe transmits readings digitally with options to log data while disconnected from the meter. An optional GPS provides location tracking of measurements. The complete system is simple to setup and easy to use. The HI9829 is highly customizable and supplied with all necessary accessories, packaged in a durable carrying case.
Quick Calibration Solution (500mL Bottle) - HI9828-25
HI9828-25 is a quick calibration solution for use with Hanna’s family of portable multiparameter meters. It provides for a single point of calibration for pH and conductivity and is ideal for field use.
- Single, Field Ready Calibration
- Leak Proof Portable Solution
Professional Waterproof Portable pH/ORP/ISE Meter - HI98191
The HI98191 is a rugged, portable pH/ORP/ISE meter with the performance and features of a benchtop meter. This professional, waterproof meter complies with IP67 standards and measures pH, ORP, ISE, and temperature. The HI98191 is supplied with all necessary accessories to perform a pH/temperature measurement packaged into a durable carrying case.
- CAL Check™
- ISE in Choice of Concentration Units
- Ergonomic, One-Handed Operation
