Out of stock

Zinc Test Kit- HI3854

The HI3854 is a chemical test kit that uses an adaptation of the zincon method to measure zinc. The HI3854 is supplied complete with all of the reagents and equipment necessary to perform 100 tests.

  • Pre-made reagents for ease of use
  • All reagents marked with expiration date and lot number for traceability
  • Color comparison cube for simple determination
  • *This product is classified as Dangerous Goods and can only be shipped via ground.
    For Professional Use Only.

    282.00 AED

    Inquire Now
    SKU:HI3854

    The HI3854 is a colorimetric chemical test kit that determines the zinc concentration in samples within a 0.0 to 3.0 mg/L (ppm) range. The HI3854 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform 100 tests.

    Features at-a-glance

    • Complete setup
      • All required materials are included with the test kit, such as the color comparison cube and reagent packets.
    • High resolution
      • Readings from 0.0 to 3.0 mg/L zinc are determined to 0.6 mg/L resolution.
    • Replacement reagents available
      • There is no need to buy a new kit when reagents are exhausted. The HI3854-100 reagent set can be ordered to replace the reagents supplied with the kit. This reagent set comes with 100 packets HI3854A-0 reagent and 2 (60mL) bottles of HI93731B-0 reagent.

    Significance of Use

    Zinc is widely used in alloys (brass, bronze, and dye-casting alloys), in galvanizing iron and other metals, also as a fungicide. It is also an essential growth element in human diet. But with concentrations higher than 5 mg/L, it gives a bitter taste to water and opalescence to alkaline water. Zinc can enter the domestic water supply from the deterioration of galvanized iron and dezincification of brass. Note: mg/L is equivalent to ppm (parts per million).

    Specifications

    SKU HI3854
    Name Zinc Test Kit- HI3854
    Zinc Measurement Type Colorimetric
    Zinc Range 0.0 to 3.0 mg/L
    Zinc Resolution 0.6 mg/L
    Zinc Method adaptation of the zincon method
    Zinc Number of Test 100
    Weight 250 g (8.8 oz.)
    Dimensions 230x59x70 mm (9.0×2.3×2.8 in.)

    Ordering Info

    HI3854 test kit comes with HI3854A-0 (100 packets), 2 bottles HI93731B-0 reagent (60 mL), 1 glass cuvet with plastic stopper, 1 (1mL) syringe, 20 mL calibrated plastic vessel, plastic spoon, and color comparison cube.

    Manuals

    Zinc Test Kit- HI3854

    Bestsellers

    HI7004/1L pH 4.01 Calibration Solution (1 L)

    77.00 AED
    HI7004/1L is a premium quality pH 4.01 calibration solution that has been dyed red for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
    • Accuracy of ±0.01 pH @ 25ā„ƒ
    • Temperature chart of the actual pH value at various temperatures printed on each bottle
    • Air-tight Seal

    HI7010L pH 10.01 Calibration Solution (500 mL)

    59.00 AED
    HI7010L is a premium quality pH 10.01 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
    • Color coded label for easy pH buffer value identification
    • Accuracy of ±0.01 pH @ 25ā„ƒ
    • Temperature chart of the actual pH value at various temperatures printed on each bottle

    HI7004L pH 4.01 Calibration Solution (500 mL)

    61.00 AED
    HI7004L is a premium quality pH 4.01 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
    • Color coded label for easy pH buffer value identification
    • Accuracy of ±0.01 pH @ 25ā„ƒ
    • Temperature chart of the actual pH value at various temperatures printed on each bottle

    HI7031L 1413 µS/cm Conductivity Standard (500mL Bottle)

    59.00 AED
    HI7031L is a premium quality 1, 413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
    • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
    • Air tight bottle with tamper-proof seal to ensure quality

    HI7030L 12880 µS/cm Conductivity Standard (500mL Bottle)

    59.00 AED
    HI7030L is a premium quality 12, 880 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
    • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
    • Air tight bottle with tamper-proof seal to ensure quality

    HI7007/1L pH 7.01 Calibration Solution (1 L)

    77.00 AED
    HI7007/1L is a premium quality pH 7.01 calibration solution that has been dyed green for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
    • Accuracy of ±0.01 pH @ 25ā„ƒ
    • Temperature chart of the actual pH value at various temperatures printed on each bottle
    • Air-tight Seal
    Back to Top
    Whatsapp
    Product has been added to your cart