3
3

Cart (3)

Subtotal : 3,807.00 AED
View Cart Checkout
Home>All Products>Parameters>ORP>ORP - Process Control>Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111
hi22 1
Sold out

Out of stock

Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111

The HI22111 controller is a simple, microprocessor-based ORP process controller specifically designed to meet your process control requirements. A host of self testing features and user-friendly functions make HI22211 a great value.

  • Fail Safe Alarm System.
  • CAL Check™ alerts users of calibration status.
  • RS485 capability makes this model PC compatible.

2,968.00 AED

Inquire Now
SKU:HI22111-1

Fail Safe Alarm System

  • Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller.

Simple Installation

  • HI22111 has mounting holes molded into the housing to assure simple, quick and secure installation without the need for additional hardware.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Matching Pin

  • A differential input prevents problems due to ground loop current, extending the life of the electrodes.

Quality Construction

  • Housed in a rugged, modular, fiber-reinforced polypropylene housing that will resist the harmful effects of most chemicals.

Password Protection

  • The Hanna password protection feature keeps these controllers safe from tampering. Only users with the proper password can change the settings of these controllers.

Specifications

SKU HI22111-1
Name Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111
ORP Range ±2000 mV
ORP Resolution 1 mV
ORP Accuracy ±2 mV
Temperature Range -9.9 to 120.0 °C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.5 °C
Consent Relay electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A – 30 VDC (resistive load) (HI211YZ and HI212YZ), fuse protected: 5A, 250V fast fuse
Alarm Relay Set Point electromechanical relay SPDT contact output, 5A – 250 VAC, 5A – 30 VDC (resistive load) fuse protected: 5A, 250V, 250V fast fuse
Analog Ouput Signal 0 to 1 mA, 0 to 20 mA, 4 to 20 mA; 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC
Digital Output Signal RS485
Power Consumption 15 VA
Over Current Protection 400 mA, 250V, fast fuse
Power Supply 115 VAC ±10%
Environment 0 to 50°C (32 to 122°F); RH max. 85% non-condensing
IP Rating IP54
Dimensions 221 x 181 x 86 mm (8.7 x 7.1 x 3.4”)
Weight 1.4

Ordering Info

Supplied with instructions.

Manuals

Wall Mounted ORP Digital Controller with Single Setpoint and Matching Pin HI22111

Bestsellers

Sold out
Quick view
Read more
Inquire Now

Swimming Pool Controller with Built-in Dosing Pumps, analog outputs with Panel Mounted Flow Cell Kit

6,246.00 AED
Control with Confidence The BL121 Swimming Pool Controller is a complete system designed for maintaining swimming pool, hot tub, and spa disinfection water quality. The BL121 is available in two configurations. The basic version is the in-line model which allows for direct installation of probe and chemical injection fittings into existing piping. The other version is a panel mounted version with a bypass flow cell. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Additional features of the BL121 include LED indicators for dosing, meter status and service, real-time graph display, programmable alarms, and password protection.
Read more
Sold out
Quick view
Read more
Inquire Now

TDS Mini Controller (0 to 999 ppm) - BL983329-1 | 115/230VAC

734.00 AED
The BL983329 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. *The BL983329 uses a 0.5 conversion factor in which 100 µS/cm = 50 ppm. Multicolor LED Indicator LED changes color based on status. Fire Retardant Casing For additional safety the controllers outer case is made of fire resistant plastic. Splash Resistant Cover A clear plastic cover protects the face panel from dirt and liquids.
Read more
Sold out
Quick view
Read more
Inquire Now

Panel-mounted ORP Digital Controller - mV600-single setpoint, on/off and porptional control, single analog output

2,366.00 AED
The mV600 controllers have been engineered with a number of outstanding features to meet all of your process control needs. mV600 offer a multitude of possibilities from ON/OFF or proportional dosage to analog recorder output and alarm. A host of self-testing features and user-friendly functions make mV600 a great value.
  • Accurate, reliable and simple to install.
  • Fully programmable microprocessor memory.
  • Wiring the controllers is simple with extractable terminal modules
Read more
Sold out
Quick view
Read more
Inquire Now

Conductivity Mini Controller (0.00-10.00 mS/cm) - BL983327-0 | 12VDC

734.00 AED
The BL983327 is a compact, panel mounted, process controller for measuring conductivity of a process stream. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid valve to open and drain a tank (i.e. boiler bleed and feed) or add freshwater until the desired set point is reached. The BL983317 is a closely related product that has the same measurement range but has a relay that is activated when the reading is below the set point. Multicolor LED Indicator LED changes color based on status. Fire Retardant Casing For additional safety the controllers outer case is made of fire resistant plastic. Splash Resistant Cover A clear plastic cover protects the face panel from dirt and liquids.
Read more
Sold out
Quick view
Read more
Inquire Now

pH Analog Controller with Self-Diagnostic Test – HI8710

2,270.00 AED
HI8710 is a panel mounted pH controller with self-diagnostic test capabilities. Users can set: the setpoint for acid or alkaline dosage, the tolerance of the setpoint before an alarm is activated, the dosage mode: automatic, continuous on or OFF and the over dosage control by setting the overtime dosage knob.
  • Hanna’s exclusive Fail Safe Alarm System protects against risks typical of industrial environments
  • Temperature compensation ensures fast, accurately compensated readings
  • Backlit, LCD display for easy viewing
Read more
bl-122-pool-spa-controller-with-ph-orp-electrode-internet-and-complete-installation-kit
Sold out
Quick view
Read more
Inquire Now

Cloud Enabled Swimming Pool Controller with Built-in Dosing Pumps and In-line Mounting Kit

5,805.00 AED
Control with Confidence The BL122 Swimming Pool Controller is a complete system designed for maintaining swimming pool, hot tub, and spa disinfection water quality. The BL122 is available in two configurations. The basic version is the in-line model which allows for direct installation of probe and chemical injection fittings into existing piping. The other version is a panel mounted version with a bypass flow cell. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Additional features of the BL122 include LED indicators for dosing, meter status and service, real-time graph display, programmable alarms, and password protection.
Read more
Sold out
Quick view
Read more
Inquire Now

pH Mini Controller with Analog Output - BL931700-12VDC

965.00 AED
The BL931700 is a compact single setpoint pH controller designed for applications where space and/or cost are important. It’s adjustable dosing relay may be configured to dose above or below a pH setpoint. Users may choose from automatic or manual dosing modes allowing for easy maintenance and troubleshooting. The device contains a high impedance pH input and may be used with any pH electrode that has a standard BNC connector. Large Clear LCD A large LCD clearly displays the parameter you are monitoring. Fire Retardant Casing Special materials provide additional protection in the event of an emergency. BNC Connection The controller’s high impedance pH input may be used with any pH electrode with a standard BNC connector.
Read more
Back to Top
Whatsapp
Product has been added to your cart
Close