0
0

Cart (0)

Home>All Products>Products>Process Control>Mini Controllers>Process Control - Resistivity Mini Controllers>Resistivity Mini Controller – BL983314-12VDC
Resistivity Mini Controller - BL983314-12VDC
Resistivity Mini Controller - BL983314-12VDC - Image 2
Resistivity Mini Controller - BL983314-12VDC - Image 3
Sold out

Out of stock

Resistivity Mini Controller – BL983314-12VDC

The BL983314 is a simple to operate resistivity controller designed for ultra pure water, reverse osmosis, and water conditioning applications. The BL983314 resistivity controller is also ideal for continuous monitoring to process solutions. Setpoint and calibration are manually adjusted with a trimmer and the alarm relay allows for simple control.

  • Fire-retardant casing
  • Selectable overdose protection system
  • Splash-resistant cover

965.00 AED

Inquire Now
SKU:BL983314-0

About the BL983314 Resistivity Mini Controllers

Readings are automatically temperature compensated with three different coefficients (β=2.4, 3.5 or 4.5 %/ā„ƒ). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system.

The relay contact is open when readings are higher than the setpoint, while for measurements lower than setpoint, the relay contact is closed. The hysteresis is typically 0.20 Mω •cm from the setpoint.

Measurements are displayed on the LCD and the multi-coloured LED continuously indicates if the controller is in measurement, dosing, or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need.

The overtime control system advises users when the relay is active for too long, helping to prevent over-dosage.

Specifications

SKU BL983314-0
Name Resistivity Mini Controller – BL983314-12VDC
Resistivity Range 0.00 to 19.90 MĪ© cm
Resistivity Resolution 0.10 MĪ© cm
Resistivity Accuracy Ā±2% F.S.
Resistivity Calibration factory calibrated
Resistivity Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 Vdc contact closed when measure < setpoint
Resistivity Dosing Set Point adjustable from 0 to 19.90 MĪ© cm
Power Consumption 10 VA
Resistivity Probe HI3314 resistivity probe with 2 m (6.6’) cable (included)
Power Supply BL983314-0: 12 VDC adapter (included); BL983314-1: 115/230 VAC; 50/60Hz
Dimensions 83 x 53 x 99 mm (3.3×2.1×3.9”)
Weight BL983314-0: 200 g (7.1 oz.); BL983314-1: 300 g (10.6 oz.)

Ordering Info

BL983314-0 (12 VDC) and BL983314-1 (115/230V) are supplied with HI3314 resistivity probe with 2 m (6.6’) cable, mounting brackets, transparent cover and instruction manual.

Manuals

Resistivity Mini Controller – BL983314-12VDC

Bestsellers

Quick view
Add to cart

Ammonia CheckerĀ®HC Reagents (25 Tests) - HI700-25

72.00 AED
The HI700-25 are the replacement reagents for the HI700 Ammonia Low-Range CheckerĀ® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability.
  • Pre-made reagents for ease of use
  • Prepared with high-purity chemicals
  • Marked with expiration date and lot number for traceability
Add to cart
Quick view
Add to cart

HI7061L General Purpose Cleaning Solution (500 mL)

61.00 AED
HI7061L is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hannaā€™s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
  • Specially formulated for cleaning electrodes
  • Air tight seal to ensure quality
  • Expiration date and lot number
Add to cart
Quick view
Add to cart

HI70300L Electrode Storage Solution (500 mL)

59.00 AED
HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any effects of diffusion/osmotic from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300L storage solution for at least one hour before taking measurements.
  • Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
  • Manufactured specifically for pH and ORP electrodes
  • Clearly marked expiration date and lot number
Add to cart
Quick view
Add to cart

HI7034L 80000 ĀµS/cm Conductivity Standard (500mL Bottle)

59.00 AED
HI7034L is a premium quality 80, 000 ĀµS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hannaā€™s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual ĀµS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Add to cart
Sale
Quick view
Add to cart

Marine Alkalinity CheckerĀ® HC Reagents (25 Tests) - HI755-26

Original price was: 32.00 AED.Current price is: 31.00 AED.
The HI755-26 are the replacement reagents for the Marine Alkalinity CheckerĀ® HC - HI755 and Marine Alkalinity (dKH) CheckerĀ® HC - HI772. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-made reagents for ease of use
  • Prepared with high purity chemicals
  • Marked with expiration date and lot number for traceability
Add to cart
Sold out
Quick view
Read more
Inquire Now

Compact Magnetic Mini-Stirrer (Black) - HI180-1

306.00 AED
HI180 are a family of lightweight and inexpensive magnetic mini-stirrers. The stirrers are compact and easy to handle, requiring very little space. HI180 mini-stirrers are available in 11 colors, allowing easy recognition on crowded benchtops. Lightweight design Speedsafeā„¢ mechanism Adjustable speed control
Read more
Sold out
Quick view
Read more
Inquire Now

edgeĀ® Multiparameter EC/TDS/Salinity Meter - HI2030

2,682.00 AED
edgeā€™s groundbreaking design is the culmination of Hannaā€™s vision, design capabilities, integrated production and world class R&D. The edge meter is only 0.5ā€ thick yet rich in features to accommodate the needs of a vast amount of customers. For those that prefer very simplistic operation there is a basic mode operation with simplified menu and options while for those who require advanced features there is the full featured standard operating mode. The edge HI2030 EC/TDS/Salinity kit can can be upgraded at any time with additional probes to measure pH or Dissolved Oxygen.
Read more
Back to Top
Whatsapp
Product has been added to your cart
Close