Out of stock

Pool Line Hydrogen Peroxide Test Kit – HI38444

HI38444 Pool Line Hydrogen Peroxide Test Kit is used for the measurement of hydrogen peroxide levels in swimming pools and spas.

  • Supplied complete with enough reagents to perform up to 100 tests (average)
  • Has both low range (0.00 to 2.00 ppm H2O2) and high range (0 to 10 ppm H2O2)
  • Uses a drop-count iodometric titration method

AED

Estimated delivery: 20 - 21 May

SKU:HI38444

Hydrogen peroxide is used as a substitute for chlorine to disinfectant pools and spas. Most common commercial forms are aqueous solutions containing about 6, 12 and 30 percent hydrogen peroxide and are referred to as “20-volume”, “40-volume” and “100-volume” respectively, meaning the value of oxygen liberated when the solution is boiled.

In the HI3844 test kit, hydrogen peroxide reacts slowly with iodide in acid solution (Step 1); thus a 15-minute interval is required to allow the reaction to occur completely. The amount of iodine generated is equivalent to the hydrogen peroxide in the sample. The liberated iodine is then titrated with standard sodium thiosulfate solution that reduces the iodine back to iodide ions (Step 2).

Step 1: H2O2 + 2H+ + 2I → I2 + 2H2O

Step 2: I2 + 2(S2O3)2- → 2I + (S4O6)2-

The HI38444 is a convenient chemical test kit that is supplied complete with all the reagents and materials necessary to perform up to a 100 tests on average for hydrogen peroxide in swimming pools, spas, and hot tubs.

Specifications

SKU HI38444
Name Pool Line Hydrogen Peroxide Test Kit – HI38444
Hydrogen Peroxide Range 0.00 to 2.00 ppm H2O2; 0 to 10 ppm H2O2
Hydrogen Peroxide Resolution 0.25 ppm H2O2; 1 ppm H2O2
Hydrogen Peroxide Method Drop-count iodometric titration
Hydrogen Peroxide Number of Tests 100
Weight 450 g (15.9 oz.)
Dimensions 235 x 175 x 115 mm (9.2 x 6.9 x 4.5”)

Ordering Info

HI3844 test kit is supplied with HI38444A-0 (100 mL) hydrogen peroxide reagent A, HI38444B-0 (17 g) hydrogen peroxide reagent B, HI38444C-0 (30 mL) hydrogen peroxide reagent C, starch indicator (25 mL), graduated plastic test tube with cap, calibration plastic vessel (50 mL), plastic pipette (3 mL), plastic pipette (1 mL), plastic spoon, and instruction manual.

Manuals

Pool Line Hydrogen Peroxide Test Kit – HI38444

Bestsellers

Digital Glass Body pH Electrode for General Purpose - HI11310

601 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Built-In Microchip
  • Spherical Glass Tip
  • Double Junction Reference
  • 3.5 mm Connector

Refillable Combination pH Electrode with BNC Connector - HI1131B

543 AED
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.
  • Refillable Electrode
  • Double Junction Design
  • High Temperature (HT) Glass

Portable pH/EC/TDS/Temperature Meter - HI9811-51

710 AED
The HI9811-51 is an economical, wateproof, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature (℃) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9811-51 is most suitable for agricultural, greenhouse and hydroponic applications.
  • 3 in 1 probe with pH, EC/TDS and temperature sensors
  • Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
  • Large LCD with instructions

Digital Glass Body pH Electrode with Matching Pin for General Purpose - HI11311

681 AED
The HI11311 is a glass body, refillable, double junction pH electrode with a matching pin and a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The matching pin integrated into the HI11311 is for the Sensor Check™ capability of the edge pH meter; this feature is used to identify problems with the pH electrode such as cracks in the sensing glass or poor condition of the reference junction. The HI11311 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Matching Pin for enabling Sensor Check feature that alerts to a broken electrode or clogged junction
  • Double Junction Reference
  • 3.5 mm Connector

Quick Calibration Solution (500mL Bottle) - HI9828-25

150 AED
HI9828-25 is a quick calibration solution for use with Hanna’s family of portable multiparameter meters. It provides for a single point of calibration for pH and conductivity and is ideal for field use.
  • Single, Field Ready Calibration
  • Leak Proof Portable Solution

HI7007C pH 7.01 Calibration Solution (500 mL)

55 AED
HI7007C is a premium quality pH 7.01 calibration solution that has been dyed green for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
  • Air-tight seal

GroLine pH 7.01 Calibration Buffer (500mL) - HI7007-050

55 AED
HI7007-050 is a high quality pH 7.01 calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.02 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Back to Top
img
Product has been added to your cart