Out of stock

Microfiber Cloth for Wiping Cuvettes (4) – HI731318

HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints from the vials so that the glass is clean for the unimpeded transmission of light.

  • Lint free
  • Will not scratch glass cuvettes

62.00 AED

Inquire Now
SKU:HI731318

Using cuvettes in photometers, colorimeters, and turbidity meters that are clean and free from scratches is critical in order to obtain an accurate measurement. These systems are optically based in which light must transmit through the glass vial in order to be detected by a silicon photodetector. Any impedance in the light path will affect the way that light will interact with the sample to be measured ultimately affecting the result obtained from the meter. Using clean HI731318 microfiber cloths will not scratch the cuvettes which can interfere with the optical system.

Example of optical systems used in photometers and turbidity meters

Photometer optical system (HI96 series)

Screen Shot 2015 01 23 at 4.50.16 PM

ISO turbidity optical system (HI98713, HI88713)

Screen Shot 2015 01 23 at 4.50.27 PM

Tungsten lamp (EPA) optical system with 90° and 180° scattered light detectors along with a built-in photometer (HI93414, HI83414)

Screen Shot 2015 01 23 at 4.50.34 PM

Specifications

SKU HI731318
Name Microfiber Cloth for Wiping Cuvettes (4) – HI731318

Manuals

Microfiber Cloth for Wiping Cuvettes (4) – HI731318

Bestsellers

HI731359 Round Glass Replacement Cuvettes for HI759 (25 pcs)

113.00 AED
The HI731359 are the replacement glass cuvettes used with the HI759 Maple Syrup Digital Grader. The Digital Grader measures the transmittance of light through a glycerol reference standard and compares it to a syrup sample. For the meter to accurately do this, proper cuvettes must be used to ensure there is no interference from scratches or inconsistencies in the glass. The HI731359 is a kit that contains 25 round glass cuvettes along with 25 sturdy plastic inserts. This kit is not only ideal for sizeable sugar houses who grade multiple samples per day, but also for those who wish to store graded samples throughout the season.
  • Optically clear glass
  • 10 mL level mark for adding correct volume
  • Durable plastic inserts for storage
Inquire Now

Shockproof Rubber Boot (Blue) - HI710027

117.00 AED
HI710027 is a blue shockproof rubber boot designed to protect your Hanna instrument and provide easier handling. This special boot helps prevent damage due to accidental impact. It can withstand high temperatures of up to 200ā„ƒ (392℉) as well as ozone and other environmental phenomena.
  • High temperature resistance
  • Meter face and connection openings
  • Streamlined casing
Inquire Now

USB Cable, PC to Probe, for HI9829 Multiparameter Portable Meter - HI76982910

426.00 AED
The HI76982910 is a probe to PC USB interface cable for use with the HI9829 and HI98290 multiparameter series meters. This allows for direct PC communication from the probe when used in conjunction with the HI929829 software.
Inquire Now

Flat Tip pH Electrode for Skin and Surfaces with Screw Connector – HI1413S/50

765.00 AED
The HI1413S/50 is a glass body, single reference junction pH electrode made with low temperature glass and a screw connector. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe's flat tip makes it ideal for pH measurements on surfaces such as skin, leather, agar plates, and paper.
  • Open Junction
  • Flat Tip
  • Viscolene Gel Electrolyte
Inquire Now

Ammonia Low Range CAL Checkā„¢ Standards - HI97700-11

618.00 AED
The HI97700-11 Low Range Ammonia Cal Check standards provides a simple solution to calibrating and validating the HI97700 Ammonia Low Range Photometer. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability.
  • Supplied with Certificate of Analysis
  • Standard value of 1.50 ±0.01 mg/L ammonia (as NH3-N) @ 25ā„ƒ
  • Reusable with long shelf life stability

Plastic Beaker Set, 100 mL (10) - HI740036P

74.00 AED
HI740036P is a set of plastic beakers that are supplied with some of the Hanna test kits, photometers, and meters. Each set comes with 10 beakers that have graduated markings and are used for measuring (up to 100 mL) or for sample analysis.
  • Durable plastic
  • Graduated volume markings
  • 10 piece set
Inquire Now

Flat Tip pH Electrode for Pulp and Paper with Quick Connect DIN Connector - HI14143

638.00 AED
The HI14143 is a glass body, single reference junction pH electrode made with low temperature glass and a quick connect DIN connector. This pre-amplified electrode features a built-in temperature sensor for temperature compensated measurements in a single probe design. This electrode has a unique open junction design in which there is a viscolene (hard gel) electrolyte layer that is free of silver chloride (AgCl) between the sample to be measured and the internal reference cell. The open junction design resists clogging and the probe’s flat tip makes it ideal for pH measurements on surfaces such as skin, leather, and paper. The HI14143 is recommended for use with Hanna’s HI99171 pH meter.
  • Open Junction
  • Flat Tip
  • Built-In Temperature Sensor
Back to Top
Whatsapp
Product has been added to your cart