Out of stock

HI7074M Cleaning Solution for Inorganic Substances (230 mL)

The HI7074M is a highly effective cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with inorganic substances. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.

  • Specially formulated cleaning solution to remove proteins from a pH electrode
  • Air tight seal to ensure quality and efficiency of cleaning solution
  • Expiration date and lot number clearly marked on the bottle

AED

Estimated delivery: 20 - 21 May

SKU:HI7074M

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.

Screen Shot 2015 01 08 at 3.20.38 PM

The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI7074M is a cleaning solution specifically for applications that involve the measurement of pH in a solution containing inorganic substances. 

Air tight bottle with tamper-proof seal

  • Ensures quality and freshness of solution

 

Each bottle marked with lot number and expiration date.

  • Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.

Specifications

SKU HI7074M
Name HI7074M Cleaning Solution for Inorganic Substances (230 mL)
Description cleaning solution for inorganic substances
Certificate of Analysis no
Package bottle
Quantity 1
Size 230 mL

Manuals

HI7074M Cleaning Solution for Inorganic Substances (230 mL)

Bestsellers

Copper High-Range Checker® HC

215 AED
The Hanna Copper High-Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits are not very accurate and only give 5 to 10 points resolution while professional instrumentation can cost hundreds of dollars and can be time-consuming to calibrate and maintain. The Checker® is both accurate and affordable.

Waterproof pHep®5 pH/Temperature Tester - HI98128

408 AED
Hanna's pHep®5 is an advanced, ergonomic, waterproof pH and temperature tester, with  0.01 resolution, that measures from -2.0 to 16.0 pH  pH and accuracy of ±0.05 pH. pHep5 features automatic one or two-point calibration to known buffer and automatic temperature compensation.
  • Waterproof
  • Replaceable pH Electrode 
  • Automatic up to Three-Point pH Calibration

Marine Calcium Checker® HC Calibration Check Set - HI758-11

80 AED
The Marine Calcium Checker® HC Calibration Check Set - HI758-11  provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker®HC.
  • Supplied with Certificate of Analysis
  • Standard value of 400 ±20 ppm calcium @ 25℃
  • Reusable with long shelf life stability

Free Chlorine CAL Check™ Standards - HI97701-11

583 AED
The HI97701-11 Free Chlorine Cal Check standards provides a simple solution to calibrating and validating the compatible free chlorine portable photometers that have a 0.00 to 5.00 mg/L (ppm) range. This high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the appropriate free chlorine photometer.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

Ionic Strength Adjuster (ISA) for Sodium ISEs - HI4016-00

244 AED
HI4016-00 is a 500 mL bottle of ionic strength adjuster (ISA) solution for use with sodium ion selective electrodes.Hanna ISA solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Required for sodium measurements
  • Air tight bottle with tamper-proof seal
  • Clearly marked lot number and expiration date 

Total Chlorine Reagents (300 tests) - HI93711-03

259 AED
The HI93711-03 are reagents for the colorimetric determination of total chlorine. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-made reagents for ease of use
  • Prepared with high-purity chemicals
  • Marked with expiration date and lot number for traceability

Sulfuric Acid 0.05M, 1L - HI70459

66 AED
HI70459 is a sulfuric acid titrant for use in standard acid-base titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
  • Air-Tight
  • Acid-Base Reagent
  • Tamper-Proof Seal
Back to Top
img
Product has been added to your cart