In stock

HI7073L Cleaning Solution for Proteins (500 mL)

The HI7073L is a special enzymatic cleaning solution that is specially formulated for use in applications were a pH electrode can be coated with proteins. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction.

  • Specially formulated cleaning solution to remove proteins from a pH electrode
  • Air tight bottle with tamper-proof seal to ensure quality
  • Expiration date and lot number clearly marked on the bottle

118 AED

Estimated delivery: 20 - 21 May

SKU:HI7073L

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.

Screen Shot 2015 01 08 at 3.20.38 PM

The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it’s designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI7073L is a protein cleaning solution specifically for applications that involve the measurement of pH in a protein based solution.

Air tight bottle with tamper-proof seal

  • Ensures quality and freshness of solution

Each bottle marked with lot number and expiration date

  • Hanna cleaning solutions are specially formulated to have an expiration of 3 years from manufacture for an unopened bottle.

Specifications

SKU HI7073L
Name HI7073L Cleaning Solution for Proteins (500 mL)
Description cleaning solution for proteins
Certificate of Analysis no
Package bottle
Quantity 1
Size 500 mL

Manuals

HI7073L Cleaning Solution for Proteins (500 mL)

Bestsellers

Silver/Sulfide Combination Ion-Selective Electrode (ISE) - HI4115

3,105 AED
The HI4115 is a solid state, combination ion selective electrode (ISE) for the determination of silver (Ag+) or sulfide (S2-) in solution. The silver/silver sulfide sensing pellet produces a potential change due to the ion exchange between the inorganic pellet membrane and the sample. The internal sensing elements are housed within a durable polyetherimide (PEI) body.The HI4115 is ideal for a variety of applications in water conditioning, environmental monitoring, and industrial processes.
  • Solid state sensor
  • Skirted cone geometry
  • Silver detection from 0.11 to 107, 900 mg/L Ag+
  • Sulfide detection from 0.003 to 32, 100 mg/L S2-

Cyanuric Acid Reagents (100 tests) - HI93722-01

164 AED
The HI93722-01 are reagents for the colorimetric determination of cyanuric acid. There are enough reagents for 100 tests to be used with a compatible benchtop or portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

HI7039L 5000 µS/cm Conductivity Standard (500 mL Bottle)

55 AED
HI7039L is a premium quality 5, 000 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality

Free Chlorine Checker HC® Calibration Check Set - HI701-11

55 AED
The Free Chlorine Checker HC® Calibration Check Set - HI701-11 provides a simple solution to validating the Free Chlorine Checker® HC - HI701 in the range of 0.00 to 2.50 ppm (mg/L). This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date to provide traceability when certifying the Checker® HC.
  • Supplied with Certificate of Analysis
  • Standard value of 1.00 ±0.05 ppm free chlorine @ 25℃
  • Reusable with long shelf life stability

Marine Nitrite Ultra Low Range Checker® HC Calibration Check Set - HI764-11

55 AED
The Marine Nitrite Ultra Low Range Checker® HC Calibration Check Set - HI764-11 provides a simple solution to validating the Nitrite Ultra Low Range Checker® HC - HI764 that has a range of 0 to 200 ppb. This high-quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiration date for traceability when certifying the Checker® HC.
  • Supplied with Certificate of Analysis
  • Standard value of 100 ±14 ppb nitrite @ 25℃
  • Reusable with long shelf life stability

Iron High Range Reagents (100 tests) - HI93721-01

88 AED
The HI93721-01 are reagents for the colorimetric determination of iron. There are enough reagents for 100 tests and are for use with Hanna’s compatible benchtop and portable photometers. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
  • Pre-dosed reagents for ease of use
  • Supplied with certificate of quality
  • Marked with expiration date and lot number for traceability

HI5007 pH 7.01 Technical Calibration Buffer (500 mL)

102 AED
HI5007-01 is a premium quality pH 7.01 technical calibration buffer that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of technical calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
Back to Top
img
Product has been added to your cart