Out of stock

Copper Reagent Set for Wine – HI83740-20

The HI83740-20 are reagents for the colorimetric determination of copper in wine samples. There are enough reagents for 20 tests to be used with Hanna’s compatible HI83740 portable photometer. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each bottle for traceability.

  • Pre-made reagents for ease of use
  • Prepared with high-purity chemicals
  • Marked with expiration date and lot number for traceability

308.00 AED

Inquire Now
SKU:HI83740-20

The HI83740-20 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow a method in which the reaction between copper and reagents causes a purple tint in the sample. By simply following the procedure and adding the correct amounts of Copper Reagents A, B, C, and D from the reagent set to the sample, the reaction between copper and reagents causes a purple tint in the sample. The intensity of color is determined by the compatible HI83740 photometer and the concentration will be displayed. The results will be displayed in mg/L of copper. These reagents are designed to be used with samples that have an expected range of 0.00 to 1.50 mg/L copper.Grapes accumulate normally only a small amount of copper by natural translocation from roots. Unless exposed to significant airborne pollution or vineyard sprays, increased concentrations in wine result from contamination during post-fermentation processing, like contact with non stainless steel equipment and as impurities in fining agents and filter media. The copper concentration in wine is normally low, less than 0.10 to 0.30 mg/L, because excess copper is precipitated during fermentation due to adsorption onto the yeast cells. This adsorption and precipitation can reduce the initial copper concentration with 40 to 89%. At higher concentration copper plays an important role in catalysing oxidation reactions of wine phenols. It is important to check the copper content both in must and in wine, because at levels above 9 mg/L copper becomes a metabolic toxin that inhibits or delays alcoholic fermentation, and concentrations exceeding 1 mg/L may be sensorial detected and should be avoided. Other copper related problems can be manifested as formation of white haze (in white wines) and later as a reddish-brown amorphous precipitate. This precipitated ‘casse’ develops only under the strongly reducing conditions found in bottled wines. It has been found that this casse is a mixture of copper compounds and proteins.Factors favoring and inhibiting copper casse formulation in wine

Necessary conditions for copper casse formation Preventive Measures
  • strong reducing conditions
  • low iron concentrations
  • high protein levels
  • light and heat
  • copper levels at less than 0.3 mg/L
  • limit SO2 addition
  • cold-stabilize and bentonite fine to reduce proteins in white wine

Specifications

SKU HI83740-20
Name Copper Reagent Set for Wine – HI83740-20
Package Bottles
Quantity 20 tests
Method The reaction between copper and the reagents causes a purple tint in the sample.

Manuals

Copper Reagent Set for Wine – HI83740-20

Bestsellers

HI7004/1L pH 4.01 Calibration Solution (1 L)

77.00 AED
HI7004/1L is a premium quality pH 4.01 calibration solution that has been dyed red for easy buffer identification. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle
  • Air-tight Seal

HI7010L pH 10.01 Calibration Solution (500 mL)

59.00 AED
HI7010L is a premium quality pH 10.01 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 2 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI7004L pH 4.01 Calibration Solution (500 mL)

61.00 AED
HI7004L is a premium quality pH 4.01 calibration solution. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Color coded label for easy pH buffer value identification
  • Accuracy of ±0.01 pH @ 25℃
  • Temperature chart of the actual pH value at various temperatures printed on each bottle

HI7031L 1413 µS/cm Conductivity Standard (500mL Bottle)

59.00 AED
HI7031L is a premium quality 1, 413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality

Combo pH/Conductivity/TDS Tester (Low Range) - HI98129

634.00 AED
The HI98129 makes measuring pH quick and easy! This lightweight, waterproof tester offers high accuracy pH, low range EC/TDS (0 to 3999 µS/cm EC/ 0 to 2000 ppm TDS) and temperature measurements in a single handheld unit! No more switching between meters for your routine measurements.
  • Waterproof
  • Replaceable pH electrode with extractable junction
  • Automatic calibration

HI7030L 12880 µS/cm Conductivity Standard (500mL Bottle)

59.00 AED
HI7030L is a premium quality 12, 880 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Inquire Now

Hydrochloric Acid 0.1N, 1L - HI70463

86.00 AED
HI70463 is a hydrochloric acid titrant for use in standard acid-base titrations. Hanna titration solutions and reagents have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
  • Air-Tight
  • Acid-Base Reagent
  • Tamper-Proof Seal
Back to Top
Whatsapp
Product has been added to your cart