In stock

Chromium VI Chemical Test Kit – HI3846

The HI3846 is a chemical test kit that uses the diphenylcarbohydrazide method to measure hexavalent chromium. The HI3846 is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.

  • Pre-made reagents for ease of use
  • All reagents marked with expiration date and lot number for traceability
  • Color comparison cube for simple determination

198 AED

Estimated delivery: 15 - 16 May

SKU:HI3846
The HI3846 is a colorimetric chemical test kit that determines the chromium concentration in samples within a 0.0 to 1.0 mg/L (ppm) range as CrVI (hexavalent chromium). The HI3846 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents to perform approximately 100 tests.

Features at-a-glance

  • Complete setup
    • All required materials are included with the test kit such as the color comparison cube and reagent packets.
  • High resolution
    • Readings from 0.0 to 1.0 mg/L Cr+6 are determined with a smallest increment of 0.2 mg/L.
  • Replacement reagents available
    • There is no need to buy a new kit when reagents are exhausted. The HI3846-100 reagent set can be ordered to replace the reagents supplied with the kit. This reagent set comes with 100 packets of HI3846-0 reagent.

Significance of Use

Chromium salts are widely used in industrial processes such as metal finishing and plating, as well as in the leather industry as a tanning agent, and in the manufacture of paints, dyes, explosives, and ceramics. Chromium may enter a water supply through the discharge of waste from these industries or from chromate-treated cooling waters, where it is frequently added for corrosion control. The hexavalent state of chromium, CrVI, is toxic to humans, animals, and aquatic life; it can produce lung tumors when inhaled and readily induces skin sensitization.

Specifications

SKU HI3846
Name Chromium VI Chemical Test Kit – HI3846
Chromium, Hexavalent Measurement Type Colorimetric
Chromium, Hexavalent Range 0.0 to 1.0 mg/L
Chromium, Hexavalent Resolution 0.2 mg/L
Chromium, Hexavalent Method diphenylcarbohydrazide
Chromium, Hexavalent Number of Tests 100
Weight 160 g (5.6 oz.)
Dimensions 230x59x70 mm (9.0×2.3×2.8 in.)

Ordering Info

HI3846 test kit comes with HI 3846-0 reagent (100 packets) and color comparison cube.

Manuals

Chromium VI Chemical Test Kit – HI3846

Bestsellers

Digital Glass Body pH Electrode for General Purpose - HI11310

601 AED
The HI11310 is a glass body refillable double junction pH electrode with a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The HI11310 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Built-In Microchip
  • Spherical Glass Tip
  • Double Junction Reference
  • 3.5 mm Connector

Refillable Combination pH Electrode with BNC Connector - HI1131B

543 AED
The HI1131B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a single ceramic junction in the outer reference cell and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use.
  • Refillable Electrode
  • Double Junction Design
  • High Temperature (HT) Glass

Portable pH/EC/TDS/Temperature Meter - HI9811-51

710 AED
The HI9811-51 is an economical, wateproof, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature (℃) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9811-51 is most suitable for agricultural, greenhouse and hydroponic applications.
  • 3 in 1 probe with pH, EC/TDS and temperature sensors
  • Amplified pH electrode for immunity to electrical noise including from ballasts and pumps
  • Large LCD with instructions

Digital Glass Body pH Electrode with Matching Pin for General Purpose - HI11311

681 AED
The HI11311 is a glass body, refillable, double junction pH electrode with a matching pin and a built-in temperature sensor for temperature compensated measurements in a single probe design. This probe connects to the meter with a 3.5 mm connector. The 3.5 mm connector is proprietary to meters that use digital electrodes. The matching pin integrated into the HI11311 is for the Sensor Check™ capability of the edge pH meter; this feature is used to identify problems with the pH electrode such as cracks in the sensing glass or poor condition of the reference junction. The HI11311 electrode features a built-in microchip that stores sensor type, serial number, and calibration information. It also features a single ceramic junction and the spherical pH sensing portion is made with high temperature glass. This design consideration is ideal for general purpose laboratory use.
  • Matching Pin for enabling Sensor Check feature that alerts to a broken electrode or clogged junction
  • Double Junction Reference
  • 3.5 mm Connector

Marine Phosphate Ultra Low Range Checker® HC - HI774

223 AED
The Hanna Phosphate Ultra Low Range (0.00 to 0.90 ppm) Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light-sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Phosphate Ultra Low-Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.
  • Compact, Portable Design
  • Built-in Timer
  • One-Button Operation

DiST® 6 EC/TDS/Temperature Tester (0.00 to 20.00 mS/cm) - HI98312

412 AED
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST’s ease of use, in combination with it’s affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST®6.
  • Waterproof
  • Exposed temperature probe for fast response
  • High range EC/TDS 0.00 to 20.00 mS/cm 0.00 to 10.00 ppt (g/L)

HI7031L/C 1413 µS/cm Conductivity Standard (500mL Bottle)

81 AED
HI7031L/C is a premium quality 1, 413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution and supplied with a certificate of analysis. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna’s line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
  • Supplied with Certificate of Analysis
  • Temperature chart of the actual µS/cm value at various temperatures printed on each bottle
  • Air tight bottle with tamper-proof seal to ensure quality
Back to Top
img
Product has been added to your cart